TSSOP Timers & Real-Time Clocks 537

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Information Access Method	Maximum Supply Voltage	On Chip Data RAM Width	Screening Level	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Interrupt Capability	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	RAM Words	Width	Additional Features	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	No. of Timers	Technology	Maximum Supply Current	Minimum Time	Nominal Supply Voltage	Sub-Category	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Volatile	JESD-609 Code
PCF8523TS/1,118	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			1.2/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Y	1.2 V	85 Cel	-40 Cel		DUAL	1.1 mm		4.4 mm			.032 MHz		260	5 mm	1	CMOS		SECONDS	3 V	Timer or RTC	.65 mm	R-PDSO-G14	1	Not Qualified	YES
ISL12057IUZ-T	Renesas Electronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.6 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm		3 mm		0	.032 MHz	30	260	3 mm		CMOS			3 V		.65 mm	S-PDSO-G8	1	Not Qualified		e3
MCP79510-I/MS	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL(SPI)	3.6 V	8	TS 16949		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	64	3 mm	ALSO OPEARTES AT 1.8V MIN SUPPLY AT 3MHZ CLOCK FREQ	0	.032 MHz	40	260	3 mm	1	CMOS	5 mA	1/100 SECOND	3 V		.5 mm	S-PDSO-G10	2		NO	e3
PCF8563TS/5,118	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.1 mm		3 mm		0	.032 MHz	30	260	3 mm	1	CMOS		SECONDS	2 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	YES	e4
DS1305EN/T&R	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2 V	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	1.1 mm		4.4 mm		0	.032 MHz	20	240	6.5 mm	0	CMOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e0
DS1305EN+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm		0	.032 MHz	30	260	6.5 mm	0	CMOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
PCF8563TS/4,118	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	2 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	YES	e4
PCF2123TS/1,118	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			1.1/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Y	1.1 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.1 mm		4.4 mm			.032 MHz	30	260	5 mm	1	CMOS		SECONDS	1.6 V	Timers or RTCs	.65 mm	R-PDSO-G14	1	Not Qualified	YES	e4
DS1339U-33/T&R	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	2.97 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm		3 mm			.032 MHz			3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e0
DS1339U-33+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.63 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1339U-33	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	2.97 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm		3 mm			.032 MHz	20	240	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e0
DS1339U-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
PCF85063ATT/AJ	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.9 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.1 mm		3 mm				30	260	3 mm	1	CMOS			3.3 V		.65 mm	S-PDSO-G8	1			e4
DS1390U-33+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		1/100 SECOND	3.3 V	Timers or RTCs	.5 mm	S-PDSO-G10	1	Not Qualified	NO	e3
DS1337U/T&R	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			1.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm		3 mm			.032 MHz			3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	YES	e0
DS1337U+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			1.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	YES	e3
STWD100PYW83F	STMicroelectronics	TIMER, PROGRAMMABLE	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			2.7 V	125 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm		1.25 mm						2 mm		CMOS			5 V		.65 mm	R-PDSO-G5	1	Not Qualified		e3
DS1305EN	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm		4.4 mm		0	.032 MHz	20	240	6.5 mm	0	CMOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e0
DS1305EN+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm		0	.032 MHz	30	260	6.5 mm	0	CMOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
MCP7940N-I/ST	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V	8	TS 16949	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm	64	3 mm		0	.032 MHz			4.4 mm	1	CMOS	.4 mA	SECONDS	2.5 V	Timer or RTC	.65 mm	R-PDSO-G8		Not Qualified	YES	e3
DS1337U	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			1.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm		3 mm			.032 MHz		245	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	YES	e0
DS1337U+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			1.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	YES	e3
DS1305EN+T&R/C01	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			2 V	85 Cel	-40 Cel		DUAL	1.1 mm		4.4 mm						6.5 mm		CMOS			5 V		.65 mm	R-PDSO-G20	1
PCF85263ATT/AJ	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL(I2C)	5.5 V	8			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	.9 V	85 Cel	-40 Cel		DUAL	1.1 mm	1	3 mm		0	.032768 MHz		260	3 mm	1	CMOS	.000885 mA	SECONDS	3.3 V		.65 mm	S-PDSO-G8	1		NO
PCF8523TS/1,112	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			1.2/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Y	1.2 V	85 Cel	-40 Cel		DUAL	1.1 mm		4.4 mm			.032 MHz		260	5 mm	1	CMOS		SECONDS	3 V	Timer or RTC	.65 mm	R-PDSO-G14	1	Not Qualified	YES
DS1390U-33	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	2.97 V	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	1.1 mm		3 mm			.032 MHz	20	240	3 mm	1	CMOS		1/100 SECOND	3.3 V	Timer or RTC	.5 mm	S-PDSO-G10	1	Not Qualified	YES	e0
DS1390U-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		1/100 SECOND	3.3 V	Timers or RTCs	.5 mm	S-PDSO-G10	1	Not Qualified	NO	e3
PCF2123TS/1,112	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			1.1/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Y	1.1 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.1 mm		4.4 mm			.032 MHz		260	5 mm	1	CMOS		SECONDS	1.6 V	Timers or RTCs	.65 mm	R-PDSO-G14	1	Not Qualified	YES	e4
PCA21125T/Q900/1,1	NXP Semiconductors		AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 4 WIRE/SPI	5.5 V		AEC-Q100	1.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Y	1.3 V	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.1 mm		4.4 mm				30	260	5 mm	1	CMOS		SECONDS	3 V	Timer or RTC	.65 mm	R-PDSO-G14	1	Not Qualified	NO	e4
PCA8565TS/1,118	NXP Semiconductors	TIMER, REAL TIME CLOCK	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			1.8 V	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS			2 V		.65 mm	S-PDSO-G8	1	Not Qualified		e4
MCP79510T-I/MS	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL(SPI)	3.6 V	8	TS 16949		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	64	3 mm	ALSO OPEARTES AT 1.8V MIN SUPPLY AT 3MHZ CLOCK FREQ	0	.032 MHz		260	3 mm	1	CMOS	5 mA	1/100 SECOND	3 V		.5 mm	S-PDSO-G10	1		NO	e3
DS1338U-33/T&R	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	3 V	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	1.1 mm		3 mm			.032 MHz	20	240	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e0
DS1338U-33+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.63 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	3 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
MCP79410-I/ST	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V	8	TS 16949	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm	64	3 mm	ALSO OPERATES AT 100KHZ WITH 1.8 V NOMINAL	0	.032 MHz	40	260	4.4 mm	1	CMOS	3 mA	SECONDS	2.5 V	Timers or RTCs	.65 mm	R-PDSO-G8	1	Not Qualified	NO	e3
PCF85263ATT1/AJ	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL(I2C)	5.5 V	8			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	.9 V	85 Cel	-40 Cel		DUAL	1.1 mm	1	3 mm		0	.032768 MHz		260	3 mm	1	CMOS	.000885 mA	SECONDS	3.3 V		.5 mm	S-PDSO-G10	1		NO
DS1338U-33	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	3 V	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	1.1 mm		3 mm			.032 MHz	20	240	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e0
DS1338U-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	3 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm		0	.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
MCP79511-I/MS	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL(SPI)	3.6 V	8	TS 16949		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	64	3 mm	ALSO OPEARTES AT 1.8V MIN SUPPLY AT 3MHZ CLOCK FREQ	0	.032 MHz	40	260	3 mm	1	CMOS	5 mA	1/100 SECOND	3 V		.5 mm	S-PDSO-G10	2		NO	e3
PCF85363ATT/AJ	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL(I2C)	5.5 V	8			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.2	Y	.9 V	85 Cel	-40 Cel		DUAL	1.1 mm	64	3 mm			.032768 MHz		260	3 mm		CMOS		SECONDS	3 V		.65 mm	S-PDSO-G8	1		YES
DS1390U-33/V+T	Analog Devices		INDUSTRIAL	GULL WING	10	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 4 WIRE/SPI			AEC-Q100	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y		85 Cel	-40 Cel	MATTE TIN	DUAL							30	260			CMOS		1/100 SECOND	3.3 V	Timers or RTCs	.5 mm	R-PDSO-G10	1	Not Qualified	NO	e3
MCP79511T-I/MS	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL(SPI)	3.6 V	8	TS 16949		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	64	3 mm	ALSO OPEARTES AT 1.8V MIN SUPPLY AT 3MHZ CLOCK FREQ	0	.032 MHz	40	260	3 mm	1	CMOS	5 mA	1/100 SECOND	3 V		.5 mm	S-PDSO-G10	1		NO	e3
DS1391U-3	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	3.3 V			3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm		3 mm			.032 MHz			3 mm	1	CMOS		1/100 SECOND	3 V	Timer or RTC	.5 mm	S-PDSO-G10	1	Not Qualified	YES	e0
DS1391U-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	3.3 V			3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		1/100 SECOND	3 V	Timers or RTCs	.5 mm	S-PDSO-G10	1	Not Qualified	NO	e3
DS1371U	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 2-WIRE/I2C	5.5 V			1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.7 V	85 Cel	-40 Cel	Tin/Lead (Sn85Pb15)	DUAL	1.1 mm		3 mm			.032 MHz	20	240	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified		e0
DS1371U+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 2-WIRE/I2C	5.5 V			1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified		e3
MCP79410T-I/ST	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V	8	TS 16949	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm	64	3 mm	ALSO OPERATES AT 100KHZ WITH 1.8 V NOMINAL	0	.032 MHz	40	260	4.4 mm	1	CMOS	3 mA	SECONDS	2.5 V	Timers or RTCs	.65 mm	R-PDSO-G8	1	Not Qualified	NO	e3
PCF8523TS/1	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V				SMALL OUTLINE			1.2 V	85 Cel	-40 Cel		DUAL	1.1 mm		4.4 mm						5 mm	1	CMOS			3 V		.65 mm	R-PDSO-G14		Not Qualified
PCF8563TS/5	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			1.8 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.1 mm		3 mm		0	.032 MHz	30	260	3 mm	1	CMOS			2 V		.65 mm	R-PDSO-G8	1	Not Qualified		e4

Timers & Real-Time Clocks

Timers and real-time clocks (RTCs) are electronic devices that are used to measure and track time intervals in electronic systems. They are crucial components in many applications, such as control systems, automation systems, and consumer electronics.

A timer is an electronic device that is used to measure the duration of time intervals. Timers can be either digital or analog and can be used to measure time intervals ranging from microseconds to hours or even days. They can be used for a variety of applications, such as controlling the duration of a signal or triggering an event after a specified time interval.

A real-time clock (RTC) is a clock that keeps track of the current time and date. Unlike a timer, an RTC is capable of keeping track of time even when the system is powered off. RTCs are commonly used in consumer electronics such as watches, clocks, and digital cameras, as well as in control systems, data loggers, and other applications that require accurate timekeeping.