TSSOP Timers & Real-Time Clocks 537

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Information Access Method	Maximum Supply Voltage	On Chip Data RAM Width	Screening Level	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Interrupt Capability	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	RAM Words	Width	Additional Features	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	No. of Timers	Technology	Maximum Supply Current	Minimum Time	Nominal Supply Voltage	Sub-Category	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Volatile	JESD-609 Code
DS1672U-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.63 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	0	CMOS		SECONDS	3.3 V	Timers or RTCs	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
ISL1221IUZ	Renesas Electronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			2.7 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm		3 mm				30	260	3 mm		CMOS			3 V		.5 mm	S-PDSO-G10	2			e3
ISL12027IV27Z-T	Renesas Electronics	TIMER, REAL TIME CLOCK		GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL(I2C)	5.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Y	2.7 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm		3 mm			.32768 MHz			4.4 mm		CMOS	3.5 mA	SECONDS	3.3 V		.65 mm	R-PDSO-G8	1		NO	e3
MCP79401-I/ST	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V	8	TS 16949	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm	64	3 mm		0	.032 MHz	40	260	4.4 mm	1	CMOS	3 mA	SECONDS	2.5 V	Timer or RTC	.65 mm	R-PDSO-G8	1	Not Qualified	NO	e3
MCP79402-I/ST	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V	8	TS 16949	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm	64	3 mm		0	.032 MHz			4.4 mm	1	CMOS	3 mA	SECONDS	2.5 V	Timer or RTC	.65 mm	R-PDSO-G8		Not Qualified	NO	e3
PT7C433833UEX	Diodes Incorporated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	2.7 V	85 Cel	-40 Cel		DUAL	1.1 mm		3 mm						3 mm	1	CMOS		SECONDS	3 V	Timer or RTC	.65 mm	S-PDSO-G8		Not Qualified	NO
DS1501WE+	Maxim Integrated	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	3.6 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.53,22	Y	3 V	70 Cel	0 Cel	MATTE TIN	DUAL	1.2 mm		8 mm		8	.032 MHz			11.8 mm	1	CMOS		SECONDS	3.3 V	Timers or RTCs	.55 mm	R-PDSO-G28	3	Not Qualified	YES	e3
DS1501WE	Maxim Integrated	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	3.6 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.53,22	Y	3 V	70 Cel	0 Cel	TIN LEAD	DUAL	1.2 mm		8 mm		8	.032 MHz			11.8 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.55 mm	R-PDSO-G28	3	Not Qualified	YES	e0
DS1677E	Maxim Integrated	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	4.5 V	70 Cel	0 Cel	TIN LEAD	DUAL	1.1 mm		4.4 mm	3-CHANNEL, 8-BIT ADC	1	.032 MHz		245	6.5 mm	0	CMOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e0
DS1677E+	Maxim Integrated	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			4.5 V	70 Cel	0 Cel	MATTE TIN	DUAL	1.1 mm		4.4 mm	3-CHANNEL, 8-BIT ADC	1	.032 MHz	30	260	6.5 mm		CMOS			5 V		.65 mm	R-PDSO-G20	1	Not Qualified		e3
BQ4802YPWR	Texas Instruments	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V			5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Y	4.5 V	70 Cel	0 Cel		DUAL	1.2 mm		4.4 mm		8	.032 MHz	NOT SPECIFIED	NOT SPECIFIED	9.7 mm	1	CMOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G28		Not Qualified	NO
BQ4802YPWRG4	Texas Instruments	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V			5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Y	4.5 V	70 Cel	0 Cel		DUAL	1.2 mm		4.4 mm		8	.032 MHz	NOT SPECIFIED	NOT SPECIFIED	9.7 mm	1	CMOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G28		Not Qualified	NO
BQ4802YPWG4	Texas Instruments	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V			5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Y	4.5 V	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	DUAL	1.2 mm		4.4 mm		8	.032 MHz	30	260	9.7 mm	1	CMOS	9 mA	SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G28	1	Not Qualified	NO	e4
BQ4802LYPW	Texas Instruments	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	3.6 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Y	2.7 V	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	DUAL	1.2 mm		4.4 mm		8	.032 MHz	30	260	9.7 mm	1	CMOS	9 mA	SECONDS	3 V	Timer or RTC	.65 mm	R-PDSO-G28	1	Not Qualified	YES	e4
BQ4802LYPWG4	Texas Instruments	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	3.6 V			3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Y	2.7 V	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	DUAL	1.2 mm		4.4 mm		8	.032 MHz	30	260	9.7 mm	1	CMOS	9 mA	SECONDS	3.3 V	Timer or RTC	.65 mm	R-PDSO-G28	1	Not Qualified	NO	e4
DS1315E-5+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, FIXED PROTOCOL	5.5 V			5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	N	4.5 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm		0	.032 MHz	30	260	6.5 mm	0	CMOS		1/100 SECOND	5 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
DS1340U-18+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	1.89 V			1.8	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm		CMOS		SECONDS	1.8 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1390U-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	3.3 V			3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		1/100 SECOND	3 V	Timers or RTCs	.5 mm	S-PDSO-G10	1	Not Qualified	NO	e3
DS1685E-5+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	5.5 V			5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Y	4.5 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm		8	.032 MHz	30	260	7.8 mm	1	CMOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G24	1	Not Qualified	YES	e3
DS1501YE+T&R	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V			5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.53,22	Y	4.5 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.2 mm		8 mm		8	.032 MHz			11.8 mm	1	CMOS		SECONDS	5 V	Timers or RTCs	.55 mm	R-PDSO-G28	3	Not Qualified	YES	e3
DS1391U-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	3.3 V			3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		1/100 SECOND	3 V	Timers or RTCs	.5 mm	S-PDSO-G10	1	Not Qualified	YES	e3
DS1343E-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm				30	260	6.5 mm	1	CMOS			3 V		.65 mm	R-PDSO-G20	1			e3
DS1344E-33+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			3 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm				30	260	6.5 mm	1	CMOS			3.3 V		.65 mm	R-PDSO-G20	1			e3
DS1685E-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	3.7 V			3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Y	2.7 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm		8	.032 MHz	30	260	7.8 mm	1	CMOS		SECONDS	3 V	Timer or RTC	.65 mm	R-PDSO-G24	1	Not Qualified	YES	e3
DS1393U-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 2-WIRE/I2C	5.5 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		1/100 SECOND	3.3 V	Timers or RTCs	.5 mm	S-PDSO-G10	1	Not Qualified	NO	e3
DS1308U-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1308U-18+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.4 MHz	30	260	3 mm	1	CMOS		SECONDS	1.8 V	Timer or RTC	.65 mm	R-PDSO-G8	1	Not Qualified	NO	e3
DS1685EN-5+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	5.5 V			5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Y	4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm		8	.032 MHz	30	260	7.8 mm	1	CMOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G24	1	Not Qualified	YES	e3
DS1339U-2+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	2.2 V			2	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	2 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1338U-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm		0	.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1670E+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	3.63 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2.97 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm	3-CHANNEL, 8-BIT ADC	1	.032 MHz	30	260	6.5 mm	0	CMOS		SECONDS	3.3 V	Timers or RTCs	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
DS1318E+T&R	Analog Devices	TIMER, PROGRAMMABLE	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	3.6 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			3 V	85 Cel	-40 Cel		DUAL	1.1 mm		4.4 mm		8	.032 MHz			7.8 mm	1	CMOS			3.3 V		.65 mm	R-PDSO-G24	1	Not Qualified
DS1391U-18+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	1.89 V			1.8	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		1/100 SECOND	1.8 V	Timers or RTCs	.5 mm	S-PDSO-G10	1	Not Qualified	NO	e3
DS1308U-18+T	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.4 MHz	30	260	3 mm	1	CMOS		SECONDS	1.8 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1670E+TRL	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	3.63 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2.97 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm	3-CHANNEL, 8-BIT ADC	1	.032 MHz			6.5 mm		CMOS		SECONDS	3.3 V	Timers or RTCs	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
DS1673E-5+T&R	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	4.5 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm	3-CHANNEL, 8-BIT ADC	1	.032 MHz	30	260	6.5 mm	0	MOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
DS1308U-3+T	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm				30	260	3 mm	1	CMOS		SECONDS	3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1315E-33+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, FIXED PROTOCOL	3.6 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	N	3 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm		0	.032 MHz	30	260	6.5 mm	0	CMOS		1/100 SECOND	3.3 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
DS1318E/GG8	Analog Devices	TIMER, PROGRAMMABLE	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	3.6 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			3 V	85 Cel	-40 Cel		DUAL	1.1 mm		4.4 mm		8				7.8 mm	1	CMOS			3.3 V		.65 mm	R-PDSO-G24	1
DS1672U-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.3 V			3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	0	CMOS		SECONDS	3 V	Timers or RTCs	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1340U-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.3 V			3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm		CMOS		SECONDS	3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1339U-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.3 V			3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1318E+	Analog Devices	TIMER, PROGRAMMABLE	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	3.6 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			3 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm		8	.032 MHz	30	260	7.8 mm	1	CMOS			3.3 V		.65 mm	R-PDSO-G24	1	Not Qualified		e3
DS1670E+T&R	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	3.63 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2.97 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm	3-CHANNEL, 8-BIT ADC	1	.032 MHz	30	260	6.5 mm	0	CMOS		SECONDS	3.3 V	Timers or RTCs	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
DS1673E-5+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	4.5 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm	3-CHANNEL, 8-BIT ADC	1	.032 MHz	30	260	6.5 mm	0	MOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
DS1338U-18+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			1.8	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm		0	.032 MHz	30	260	3 mm	1	CMOS		SECONDS	1.8 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1372U+TR	Analog Devices		INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			2.4/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	2.4 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz			3 mm	1	CMOS		SECONDS		Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified		e3
DS1315EN-33+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, FIXED PROTOCOL	3.6 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	N	3 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm		0	.032 MHz	30	260	6.5 mm	0	CMOS		1/100 SECOND	3.3 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3

Timers & Real-Time Clocks

Timers and real-time clocks (RTCs) are electronic devices that are used to measure and track time intervals in electronic systems. They are crucial components in many applications, such as control systems, automation systems, and consumer electronics.

A timer is an electronic device that is used to measure the duration of time intervals. Timers can be either digital or analog and can be used to measure time intervals ranging from microseconds to hours or even days. They can be used for a variety of applications, such as controlling the duration of a signal or triggering an event after a specified time interval.

A real-time clock (RTC) is a clock that keeps track of the current time and date. Unlike a timer, an RTC is capable of keeping track of time even when the system is powered off. RTCs are commonly used in consumer electronics such as watches, clocks, and digital cameras, as well as in control systems, data loggers, and other applications that require accurate timekeeping.