TSSOP Timers & Real-Time Clocks 537

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Information Access Method	Maximum Supply Voltage	On Chip Data RAM Width	Screening Level	No. of Bits	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Interrupt Capability	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	RAM Words	Width	Additional Features	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	No. of Timers	Technology	Maximum Supply Current	Minimum Time	Nominal Supply Voltage	Sub-Category	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Volatile	JESD-609 Code
MCP79512-I/MS	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL(SPI)	3.6 V	8	TS 16949			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	64	3 mm	ALSO OPEARTES AT 1.8V MIN SUPPLY AT 3MHZ CLOCK FREQ	0	.032 MHz	40	260	3 mm	1	CMOS	5 mA	1/100 SECOND	3 V		.5 mm	S-PDSO-G10	2		NO	e3
PCF2123TS/1	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			8	1.1/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Y	1.1 V	85 Cel	-40 Cel		DUAL	1.1 mm		4.4 mm		0	.032 MHz		260	5 mm	1	CMOS		SECONDS	2 V	Timer or RTC	.65 mm	R-PDSO-G14	1	Not Qualified	YES
MC14541BDTR2G	Onsemi	TIMER, PROGRAMMABLE	MILITARY	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		18 V					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			3 V	125 Cel	-55 Cel	MATTE TIN	DUAL	1.2 mm		4.4 mm		0	3 MHz	30	260	5 mm	1	CMOS			5 V		.65 mm	R-PDSO-G14	1	Not Qualified		e3
MCP795W11-I/ST	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL(SPI)	3.6 V	8	TS 16949	8	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm	64	4.4 mm	ALSO OPEARTES AT 1.8 V MINIMUM SUPPLY AT 3 MHZ	0	.032 MHz	40	260	5 mm	1	CMOS	5 mA	1/100 SECOND	3 V	Timer or RTC	.65 mm	R-PDSO-G14	1	Not Qualified	NO	e3
BQ4802LYPWRG4	Texas Instruments	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	3.6 V				3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Y	2.7 V	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	DUAL	1.2 mm		4.4 mm		8	.032 MHz	30	260	9.7 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	R-PDSO-G28	1	Not Qualified	NO	e4
PCA85073ADP/Q900Z	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V		AEC-Q100			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	105 Cel	-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	1.1 mm		3 mm		0	.032768 MHz	30	260	3 mm	1	CMOS	50 mA		3 V		.65 mm	S-PDSO-G8	1		NO	e4
DS1682	Maxim Integrated	TIMER, TIME RECORDER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			2.5 V	85 Cel	-40 Cel		DUAL	1.1 mm		3 mm			.1 MHz	NOT SPECIFIED	NOT SPECIFIED	3 mm	0	CMOS			2.7 V		.65 mm	S-PDSO-G8		Not Qualified
MCP79520T-I/MS	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL(SPI)	3.6 V	8	TS 16949			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	64	3 mm	ALSO OPEARTES AT 1.8V MIN SUPPLY AT 3MHZ CLOCK FREQ	0	.032 MHz	40	260	3 mm	1	CMOS	5 mA	1/100 SECOND	3 V		.5 mm	S-PDSO-G10	2		NO	e3
DS1390U-3	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	3.3 V				3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	2.7 V	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	1.1 mm		3 mm			.032 MHz	20	240	3 mm	1	CMOS		1/100 SECOND	3 V	Timer or RTC	.5 mm	S-PDSO-G10	1	Not Qualified	YES	e0
DS1390U-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	3.3 V				3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		1/100 SECOND	3 V	Timers or RTCs	.5 mm	S-PDSO-G10	1	Not Qualified	NO	e3
MCP795W12-I/ST	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL(SPI)	3.6 V	8	TS 16949	8	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm	64	4.4 mm	ALSO OPEARTES AT 1.8 V MINIMUM SUPPLY AT 3 MHZ	0	.032 MHz	40	260	5 mm	1	CMOS	5 mA	1/100 SECOND	3 V	Timer or RTC	.65 mm	R-PDSO-G14	1	Not Qualified	NO	e3
MCP795W21-I/ST	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL(SPI)	3.6 V	8	TS 16949	8	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm	64	4.4 mm	ALSO OPEARTES AT 1.8 V MINIMUM SUPPLY AT 3 MHZ	0	.032 MHz	40	260	5 mm	1	CMOS	5 mA	1/100 SECOND	3 V	Timer or RTC	.65 mm	R-PDSO-G14	1	Not Qualified	NO	e3
BU9873FVT-GE2	ROHM	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			1.8 V	85 Cel	-40 Cel		DUAL	1.2 mm		3 mm				NOT SPECIFIED	NOT SPECIFIED	4.4 mm		CMOS			3 V		.65 mm	R-PDSO-G8
ISL1208IU8Z-T7A	Renesas Electronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V	8				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.2	Y	2.7 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	2	3 mm		0	.032768 MHz	30	260	3 mm		CMOS	.004 mA	SECONDS	3 V		.65 mm	S-PDSO-G8	2		NO	e3
DS1344E-18+	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				1.8	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	1.71 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm		4.4 mm			4 MHz	30	260	6.5 mm	1	CMOS		SECONDS	1.8 V	Timers or RTCs	.65 mm	R-PDSO-G20	1	Not Qualified	NO	e3
MCP79402T-I/ST	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V	8	TS 16949		2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm	64	3 mm		0	.032 MHz			4.4 mm	1	CMOS	3 mA	SECONDS	2.5 V	Timer or RTC	.65 mm	R-PDSO-G8		Not Qualified	NO	e3
DS1306E/T&R	Maxim Integrated	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2 V	70 Cel	0 Cel	TIN LEAD	DUAL	1.1 mm		4.4 mm		0	.032 MHz			6.5 mm	0	CMOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e0
DS1306E+T&R	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm		0	.032 MHz	30	260	6.5 mm	0	CMOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
DS1344E-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	3 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm			4 MHz	30	260	6.5 mm	1	CMOS		SECONDS	3.3 V	Timers or RTCs	.65 mm	R-PDSO-G20	1	Not Qualified	NO	e3
ISL12026IVZ-T	Renesas Electronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			2.7 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm		3 mm				30	260	4.4 mm		CMOS			3.3 V		.65 mm	R-PDSO-G8	1			e3
DS1343E-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm			4 MHz	30	260	6.5 mm	1	CMOS		SECONDS	3 V	Timers or RTCs	.65 mm	R-PDSO-G20	1	Not Qualified	NO	e3
DS1344E-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm			4 MHz	30	260	6.5 mm	1	CMOS		SECONDS	3 V	Timers or RTCs	.65 mm	R-PDSO-G20	1	Not Qualified	NO	e3
PCA8565TS	NXP Semiconductors	TIMER, REAL TIME CLOCK	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V		AEC-Q100		2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	125 Cel	-40 Cel		DUAL	1.1 mm		3 mm			.032 MHz		260	3 mm	1	CMOS		SECONDS	2 V	Timer or RTC	.65 mm	S-PDSO-G8		Not Qualified	NO
PCA8565TS/1	NXP Semiconductors	TIMER, REAL TIME CLOCK	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			1.8 V	125 Cel	-40 Cel		DUAL	1.1 mm		3 mm				30	260	3 mm	1	CMOS			2 V		.65 mm	S-PDSO-G8
S-35390A-T8T1G	Ablic	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 2-WIRE/I2C	5.5 V					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			1.3 V	85 Cel	-40 Cel	TIN BISMUTH	DUAL	1.1 mm		3 mm			.032 MHz	10	260	4.4 mm	1	CMOS			3 V		.65 mm	R-PDSO-G8		Not Qualified		e6
DS1343E-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	3 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm			4 MHz	30	260	6.5 mm	1	CMOS		SECONDS	3.3 V	Timers or RTCs	.65 mm	R-PDSO-G20	1	Not Qualified	NO	e3
MAX16998DAUA/V+	Analog Devices	TIMER, PROGRAMMABLE	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES		40 V					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			5 V	125 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm				30	260	3 mm	1	BICMOS			14 V		.65 mm	S-PDSO-G8	1	Not Qualified		e3
PCA8565TS/S410/1,5	NXP Semiconductors	TIMER, REAL TIME CLOCK	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			1.8 V	125 Cel	-40 Cel		DUAL	1.1 mm		3 mm						3 mm	1	CMOS			2 V		.65 mm	S-PDSO-G8
PCF85063ATT/A	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.9 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.1 mm		3 mm				30	260	3 mm	1	CMOS			3.3 V		.65 mm	S-PDSO-G8	1			e4
S-35390AH-T8T2U	Seiko Epson	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 2-WIRE/I2C	5.5 V		AEC-Q100			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			1.3 V	105 Cel	-40 Cel		DUAL	1.1 mm		3 mm						4.4 mm		CMOS			3 V		.65 mm	R-PDSO-G8
BQ4802YPW	Texas Instruments	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V				5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Y	4.5 V	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	DUAL	1.2 mm		4.4 mm		8	.032 MHz	30	260	9.7 mm	1	CMOS	9 mA	SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G28	1	Not Qualified	YES	e4
DS1308U-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	3 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm		CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1339AU+T	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm				30	260	3 mm	1	CMOS			3.3 V		.65 mm	S-PDSO-G8	1			e3
DS1343E-18+	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				1.8	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	1.71 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm		4.4 mm			4 MHz	30	260	6.5 mm	1	CMOS		SECONDS	1.8 V	Timers or RTCs	.65 mm	R-PDSO-G20	1	Not Qualified	NO	e3
DS1371U/T&R	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 2-WIRE/I2C	5.5 V				1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm		3 mm			.032 MHz			3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified		e0
DS1371U+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 2-WIRE/I2C	5.5 V				1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified		e3
ISL12027IV27AZ	Renesas Electronics	TIMER, REAL TIME CLOCK		GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL(I2C)	5.5 V					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Y	2.7 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm		3 mm			.32768 MHz			4.4 mm		CMOS	3.5 mA	SECONDS	3.3 V		.65 mm	R-PDSO-G8	1		NO	e3
MCP79512T-I/MS	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL(SPI)	3.6 V	8	TS 16949			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	64	3 mm	ALSO OPEARTES AT 1.8V MIN SUPPLY AT 3MHZ CLOCK FREQ	0	.032 MHz	40	260	3 mm	1	CMOS	5 mA	1/100 SECOND	3 V		.5 mm	S-PDSO-G10	1		NO	e3
MCP79522-I/MS	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL(SPI)	3.6 V	8	TS 16949			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	64	3 mm	ALSO OPEARTES AT 1.8V MIN SUPPLY AT 3MHZ CLOCK FREQ	0	.032 MHz	40	260	3 mm	1	CMOS	5 mA	1/100 SECOND	3 V		.5 mm	S-PDSO-G10	2		NO	e3
DS1339BU+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1339BU+T	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm				30	260	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
MCP79411T-I/ST	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V	8	TS 16949		2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm	64	3 mm	ALSO OPERATES AT 100KHZ WITH 1.8 V NOMINAL	0	.032 MHz	40	260	4.4 mm	1	CMOS	3 mA	SECONDS	2.5 V	Timers or RTCs	.65 mm	R-PDSO-G8	1	Not Qualified	NO	e3
MCP795W22-I/ST	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL(SPI)	5.5 V	8	TS 16949	8	2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm	64	4.4 mm	ALSO OPEARTES AT 1.8 V MINIMUM SUPPLY AT 3 MHZ	0	.032 MHz			5 mm	1	CMOS	5 mA	1/100 SECOND	3 V	Timer or RTC	.65 mm	R-PDSO-G14		Not Qualified	NO	e3
DS1341U+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm		0	.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	YES	e3
PCA85063ATT/AJ	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V		AEC-Q100			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.9 V	105 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.1 mm		3 mm				30	260	3 mm	1	CMOS			3.3 V		.65 mm	S-PDSO-G8	1			e4
DS1339AU+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm				30	260	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1342U+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm		0	.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	YES	e3
DS1672U-33	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.63 V				3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	2.97 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm		3 mm			.032 MHz			3 mm	0	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e0

Timers & Real-Time Clocks

Timers and real-time clocks (RTCs) are electronic devices that are used to measure and track time intervals in electronic systems. They are crucial components in many applications, such as control systems, automation systems, and consumer electronics.

A timer is an electronic device that is used to measure the duration of time intervals. Timers can be either digital or analog and can be used to measure time intervals ranging from microseconds to hours or even days. They can be used for a variety of applications, such as controlling the duration of a signal or triggering an event after a specified time interval.

A real-time clock (RTC) is a clock that keeps track of the current time and date. Unlike a timer, an RTC is capable of keeping track of time even when the system is powered off. RTCs are commonly used in consumer electronics such as watches, clocks, and digital cameras, as well as in control systems, data loggers, and other applications that require accurate timekeeping.