SPDT RF/Microwave Switches 405

Reset All

Part	Manufacturer	RF or Microwave Device Type	Mounting Feature	No. of Terminals	Package Body Material	Technology	No. of Functions	Maximum Input Power (CW)	Maximum Voltage Standing Wave Ratio	Compression Point (1 dB)	Construction	Power Supplies (V)	Package Equivalence Code	Characteristic Impedance	Sub-Category	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Minimum Isolation	Maximum Insertion Loss	Additional Features	Nominal On Time	JESD-609 Code	Minimum Operating Frequency	Maximum Operating Frequency	Port Termination
UPG2009TB-A	Renesas Electronics	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1	36.02 dBm		34 dBm	COMPONENT	2.8	TSSOP6,.08	50 ohm	RF/Microwave Switches	85 Cel	-45 Cel	Tin/Bismuth (Sn/Bi)	24 dB	.5 dB	HIGH ISOLATION		e6	500 MHz	2500 MHz
UPG2008TB-E3	Renesas Electronics	SPDT						28.06 dBm			COMPONENT			50 ohm		85 Cel	-45 Cel	Tin/Lead (Sn/Pb)		.9 dB			e0	500 MHz	2500 MHz
UPG2185T6R-E2-A	Renesas Electronics	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1	31 dBm		30.5 dBm	COMPONENT	3	SOLCC6,.04,14	50 ohm	RF/Microwave Switches	90 Cel	-40 Cel	Tin/Bismuth (Sn/Bi)	22 dB	.8 dB	HIGH ISOLATION		e6	2000 MHz	6000 MHz
UPG2214TB-A	Renesas Electronics	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1	30 dBm		20 dBm	COMPONENT	3	TSSOP6,.08		RF/Microwave Switches	85 Cel	-45 Cel	Tin/Bismuth (Sn/Bi)	20 dB	.6 dB			e6	50 MHz	3000 MHz
UPG2022T5G-E1-A	Renesas Electronics	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1					2.8	SOLCC6,.08,38		RF/Microwave Switches	85 Cel	-40 Cel		13 dB	1.1 dB		.02 us			5850 MHz
UPG2012TB-A	Renesas Electronics	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1			24 dBm		2.8	TSSOP6,.08		RF/Microwave Switches	85 Cel	-45 Cel		24 dB	.5 dB					2500 MHz
2SMES-01CT	Omron	SPDT
2SMES-01	Omron	SPDT							1.2		COMPONENT			50 ohm		85 Cel	-20 Cel			3 dB				2000 MHz	12000 MHz
HMMC-2007	Broadcom	SPDT				GAAS	1	26.99 dBm		27 dBm	COMPONENT	+-10	DIE OR CHIP	50 ohm	RF/Microwave Switches	125 Cel	-55 Cel			1.4 dB				0 MHz	8000 MHz	ABSORPTIVE
ALM-40220	Broadcom	SPDT
PPS-010	Broadcom	SPDT						26.02 dBm	1.7		MODULE			50 ohm		125 Cel	-55 Cel			2.5 dB	HIGH RELIABILITY			10 MHz	2000 MHz
AMMC-2008	Broadcom	SPDT						20 dBm			COMPONENT			50 ohm						2.3 dB				0 MHz	50000 MHz
MGS-70008-TR2	Broadcom	SPDT						30 dBm	1.7		COMPONENT			50 ohm						1.5 dB				0 MHz	3000 MHz
AMMC-2008-W50	Broadcom	SPDT				GAAS	1	20 dBm		14 dBm	COMPONENT	-3	DIE OR CHIP	50 ohm	RF/Microwave Switches				25 dB	2.3 dB	HIGH RELIABILITY			0 MHz	50000 MHz
33016C	Broadcom	SPDT						30 dBm	3		MODULE					95 Cel	-65 Cel			3 dB				100 MHz	18000 MHz
ALM-40220-BLKG	Broadcom	SPDT	SURFACE MOUNT	5	PLASTIC/EPOXY		1	41.99 dBm			COMPONENT	5	LCC5(UNSPEC)	50 ohm	RF/Microwave Switches				17 dB	.45 dB	HIGH ISOLATION			2010 MHz	2025 MHz	REFLECTIVE
AMMC-2008-W10	Broadcom	SPDT				GAAS	1	20 dBm			COMPONENT	-3	DIE OR CHIP	50 ohm	RF/Microwave Switches				25 dB	2.3 dB	HIGH RELIABILITY			0 MHz	50000 MHz
HMMC-2027	Broadcom	SPDT				GAAS	1	25.05 dBm		27 dBm	COMPONENT	-10	DIE OR CHIP	50 ohm	RF/Microwave Switches	125 Cel	-55 Cel		27 dB	3 dB				0 MHz	26500 MHz	ABSORPTIVE
MGS-70008-TR1	Broadcom	SPDT						30 dBm	1.7		COMPONENT			50 ohm						1.5 dB				0 MHz	3000 MHz
ALM-40220-TR1G	Broadcom	SPDT	SURFACE MOUNT	5	PLASTIC/EPOXY		1	41.99 dBm			COMPONENT	5	LCC5(UNSPEC)	50 ohm	RF/Microwave Switches				17 dB	.45 dB	HIGH ISOLATION			2010 MHz	2025 MHz	REFLECTIVE
SMP-11003	Samsung	SPDT	SURFACE MOUNT	8	PLASTIC/EPOXY	GAAS	1		1.9	23 dBm		-3	SOP8,.25		RF/Microwave Switches	85 Cel	-55 Cel	Tin/Lead (Sn/Pb)	15 dB	1.8 dB		.015 us	e0		3000 MHz	REFLECTIVE

RF/Microwave Switches

RF/microwave switches are electronic components used to selectively route high-frequency signals between input and output ports. These switches are essential building blocks in radio communication systems, test and measurement equipment, and radar systems. RF/microwave switches are designed to operate in a specific frequency range, and their performance is characterized by parameters such as insertion loss, isolation, and switching speed.

There are different types of RF/microwave switches, including electromechanical switches, PIN diode switches, and solid-state switches. Electromechanical switches use mechanical contacts to switch between input and output ports, while PIN diode switches and solid-state switches use electronic control signals to route signals between different ports. PIN diode switches are suitable for lower power applications, while solid-state switches are capable of handling higher power levels.

RF/microwave switches can be classified based on their configuration and functionality. Single-pole single-throw (SPST) switches have a single input and a single output and can switch between two states, while single-pole double-throw (SPDT) switches have a single input and two outputs and can switch between two output ports. Multi-throw switches have more than two output ports and can switch between multiple states. Switches can also be classified as absorptive or reflective, depending on their ability to absorb or reflect the input signal when it is not being routed to the output port.