SLIDE SWITCH Slide Switches 309

Reset All

Part	Manufacturer	Switch Type	Mounting Feature	Switch Function	Type (Actuator)	Contact Function	Solderability	AC Maximum Rating R Load (Contact)	Center Contact Plating	Color (Actuator)	Housing Material	Body Color	Angle (Actuator)	Dielectric Withstand Volts (V)	Terminal Material	Electrical Life	DC Maximum Power Rating R Load (Contact)	Insulation Resistance	Packing Method	Body Length/Diameter	Body Width	Sealing	Contact Timing	Maximum Operating Force	Insulator Material	End Contact Plating	Body Height	DC Maximum Rating R Load (Contact)	Washability	Maximum Operating Temperature	Maximum AC Contact Current	Center Contact Material	Minimum Operating Temperature	Length (Actuator)	Terminal Finish	Switch Action	Maximum DC Contact Current	Termination Type	No. of Independent Keys	Manufacturer Series	Contact Resistance	Actuator Travel (mm)	End Contact Material	PCB Hole Count	No. of Positions	Maximum DC Contact Voltage	Additional Features	Maximum AC Contact Voltage	JESD-609 Code	Terminal Length	AC Maximum Power Rating R Load (Contact)	Material (Actuator)
CAS-220B	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	DPDT															BULK	5.4 mm	3.9 inch	TAPE SEALED; WATER PROOF		5 N			2.5 mm	.025A@24VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.025 A	SOLDER								24 V	LOW PROFILE		e4
1571982-2	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	SPDT	FLUSH TOP TYPE	ON-ON		.02A@20VAC	GOLD	BLACK						60000 Cycle(s)				10.2 mm	5.23 inch			5.88 N			9.65 mm	.02A@20VDC		80 Cel	.4 A		-20 Cel	.11 inch		LATCHED	.4 A	SOLDER	1				COPPER ALLOY			20 V		20 V				POLYESTER
CAS-220A1	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	DPDT															BULK	5.4 mm	3.9 inch			5 N			2.5 mm	.025A@24VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.025 A	SOLDER								24 V	LOW PROFILE		e4
CAS-220B1	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	DPDT															BULK	5.4 mm	3.9 inch			5 N			2.5 mm	.025A@24VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.025 A	SOLDER								24 V	LOW PROFILE		e4
CJS-1200B	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	SPDT												200 Cycle(s)			BAG	5.4 mm	2.5 inch	TAPE SEALED; WATER PROOF		5.9 N			2.4 mm	.1A@6VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.1 A	SOLDER								6 V			e4
CJS-1200B1	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	SPDT												200 Cycle(s)			BAG	5.4 mm	2.5 inch			5.9 N			2.4 mm	.1A@6VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.1 A	SOLDER								6 V			e4
1825014-2	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	SPDT	EXTENDED SIDE TYPE	ON-OFF-ON		.02A@20VAC	GOLD	BLACK						60000 Cycle(s)				10.2 mm	9.14 inch			5.88 N			9.73 mm	.02A@20VDC		80 Cel	.4 A		-20 Cel	.106 inch		LATCHED	.4 A	SOLDER				2.9972	COPPER ALLOY			20 V		20 V				POLYESTER
MS12AFW01	Nkk Switches	SLIDE SWITCH	PANEL MOUNT	SPDT	SLIDE	ON-ON	WAVE	3A@250VAC	SILVER		STAINLESS STEEL		0 deg	1500VAC	COPPER ALLOY	25000 Cycle(s)		1000000000 ohm		12.7 mm	6.604 inch	EPOXY	BREAK-BEFORE-MAKE		GLASS FILLED DIALLYL PHTHALATE	SILVER	16.002 mm			70 Cel	3 A	SILVER	-10 Cel	.201 inch		HORIZONTAL		SOLDER LUG			10 mohm		SILVER		2			250 V		.177 inch
CJS-1200TB2	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	SPDT												200 Cycle(s)			TAPE AND REEL	5.4 mm	2.5 inch	TAPE SEALED		5.9 N			2.4 mm	.1A@6VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.1 A	SOLDER								6 V			e4
1825031-2	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	SPDT	SIDE TYPE	ON-OFF-ON		.05A@48VAC	GOLD	YELLOW						10000 Cycle(s)			TRAY	9.5 mm	5 inch	EPOXY TERMINAL SEALED		4.903 N			5.6 mm	.05A@48VDC		80 Cel	.4 A		-20 Cel	.11 inch		LATCHED	.4 A	SOLDER	1			2.2098	PHOSPHOR BRONZE			20 V		48 V				POLYAMIDE
CAS-220A2	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	DPDT															BULK	5.4 mm	3.9 inch	TAPE SEALED		5 N			2.5 mm	.025A@24VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.025 A	SOLDER								24 V	LOW PROFILE		e4
CAS-220B2	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	DPDT															BULK	5.4 mm	3.9 inch	TAPE SEALED		5 N			2.5 mm	.025A@24VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.025 A	SOLDER								24 V	LOW PROFILE		e4
SLS121RA04	TE Connectivity	SLIDE SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT				.25A@125VAC								6000 Cycle(s)				11 mm	7.5 inch			3.92 N			5.6 mm	.15A@12VDC		85 Cel	.25 A		-10 Cel			LATCHED	.15 A	SOLDER								12 V		125 V
1-1825010-8	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	4PDT	EXTENDED TOP TYPE	ON-ON		.3A@115VAC	SILVER	NATURAL						15000 Cycle(s)			TUBE	17.78 mm	7.37 inch						4.46 mm	.3A@115VDC		80 Cel	.3 A		-40 Cel	.11 inch		LATCHED	.3 A	SOLDER	1			2.794	COPPER ALLOY			28 V		115 V				NYLON
1825271-2	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	6PDT	TOP TYPE	ON-ON		.02A@20VAC	GOLD	BLACK						15000 Cycle(s)			TRAY	20 mm	9.4 inch	EPOXY TERMINAL SEALED		8.83 N			12 mm	.02A@20VDC		85 Cel	.4 A		-20 Cel	.238 inch		LATCHED	.4 A	SOLDER	1			2.0066	COPPER ALLOY			20 V		20 V				POLYOXYMETHYLENE
MS23BNW03	Nkk Switches	SLIDE SWITCH	THROUGH HOLE-STRAIGHT	DPDT	SLIDE	ON-OFF-ON	WAVE	3A@250VAC	SILVER		STAINLESS STEEL		0 deg	1500VAC	COPPER ALLOY	25000 Cycle(s)		1000000000 ohm		12.7 mm	11.4046 inch	EPOXY	BREAK-BEFORE-MAKE		GLASS FILLED DIALLYL PHTHALATE	SILVER	19.05 mm			70 Cel	3 A	SILVER	-10 Cel	.201 inch		HORIZONTAL		SOLDER			10 mohm		SILVER	6	3			250 V		.25 inch
JS102000SAQN	C & K Components	SLIDE SWITCH	SURFACE MOUNT-RIGHT ANGLE	SPDT	SLIDE				SILVER	BLACK	NYLON			250VAC	BRASS	15000 Cycle(s)		100000000 ohm	TAPE AND REEL	6.7 mm	3.2 inch					SILVER	.7 mm	.001A@5VDC		85 Cel		COPPER ALLOY	-40 Cel	.079 inch	SILVER	LATCHED	.001 A	SOLDER			200 mohm		COPPER ALLOY		1	5 V	LOW PROFILE		e4			NYLON
V80212S205QE	ITT Cannon	SLIDE SWITCH	PANEL MOUNT	DPDT	SCREW DRIVER SLOT			10.1A@125VAC								10000 Cycle(s)				33.02 mm	19.05 inch						13.72 mm	4A@28VDC		85 Cel	10.1 A		-30 Cel		Silver (Ag)	LATCHED	4 A	QUICK CONNECT		V						28 V		125 V	e4
1101-M1S3ZQE2	Lamb Industries	SLIDE SWITCH	PANEL MOUNT	SPST	SLIDE	ON-ON		2A@250VAC	SILVER				0 deg	1500VAC	COPPER ALLOY	50000 Cycle(s)		1000000000 ohm		12.7 mm	6.096 inch	EPOXY			DIALLYL PHTHALATE	SILVER	6.2992 mm	5A@28VDC		85 Cel	2 A	COPPER	-30 Cel	.201 inch		MAINTAINED	5 A	SOLDER LUG		1101	10 mohm		COPPER		3	28 V	APPROVALS: UL,CSA	250 V		.159 inch		NYLON
1101M1S3ZQE2	C & K Components	SLIDE SWITCH	PANEL MOUNT	SPDT	HIGH TYPE		MIL-STD	6A@120VAC	SILVER	BLACK	STAINLESS STEEL			1000VRMS	COPPER ALLOY	40000 Cycle(s)		1000000000 ohm		12.7 mm	6.6 inch	EPOXY TERMINAL SEALED			DIALLYL PHTHALATE	SILVER	6.35 mm	6A@28VDC		65 Cel	6 A	COPPER ALLOY	-30 Cel	.2 inch	GOLD OVER NICKEL	LATCHED	6 A	SOLDER			10 mohm		COIN SILVER		3	28 V	ROHS COMPLIANT	120 V	e4			NYLON
1825116-1	TE Connectivity	SLIDE SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	TOP TYPE			.25A@125VAC								6000 Cycle(s)				11 mm	7.5 inch			3.92 N			5.6 mm	.15A@12VDC		85 Cel	.25 A		-10 Cel			LATCHED	.15 A	SOLDER								12 V		125 V
AS12AP	Nkk Switches	SLIDE SWITCH	THROUGH HOLE-STRAIGHT	SPDT	SLIDE	ON-ON	WAVE		GOLD OVER SILVER	WHITE	GLASS FILLED NYLON		0 deg	500VAC	BRASS	50000 Cycle(s)	0.4VA@28VDC	500000000 ohm		9.8044 mm	5.3848 inch				CARBON COMPOSITE POLYMER	GOLD OVER NICKEL	14.6812 mm			85 Cel		PHOSPHOR BRONZE	-10 Cel	.098 inch	GOLD	HORIZONTAL		SOLDER			50 mohm		BRASS	3	3				e4	.122 inch		GLASS FILLED POLYAMIDE
MS12ANG03	Nkk Switches	SLIDE SWITCH	THROUGH HOLE-STRAIGHT	SPDT	SLIDE	ON-ON	WAVE		GOLD OVER NICKEL		STAINLESS STEEL		0 deg	1500VAC	COPPER ALLOY	50000 Cycle(s)	0.4VA@28VDC	1000000000 ohm		12.7 mm	6.604 inch	EPOXY	BREAK-BEFORE-MAKE		GLASS FILLED DIALLYL PHTHALATE	GOLD OVER NICKEL	17.8562 mm			70 Cel		COPPER ALLOY	-10 Cel	.201 inch		HORIZONTAL		SOLDER			20 mohm		COPPER ALLOY	3	2					.25 inch
SS12SDP4	Nkk Switches	SLIDE SWITCH	THROUGH HOLE-STRAIGHT	SPDT	TOP TYPE			.014A@28VAC								10000 Cycle(s)				10.2 mm	4 inch						4.5 mm	.014A@28VDC		60 Cel	.014 A		-15 Cel		GOLD	LATCHED	.014 A	SOLDER		SS						28 V		28 V	e4
1201M2S3ABE2	ITT Cannon	SLIDE SWITCH	THROUGH HOLE-RIGHT ANGLE	DPDT	SLIDE	ON-ON	MIL-STD	.02A@20VAC	GOLD OVER NICKEL	BLACK	STAINLESS STEEL		0 deg	1000VRMS	COPPER ALLOY	100000 Cycle(s)	0.4VA@20VDC	1000000000 ohm		12.7 mm	12.7 inch	EPOXY TERMINAL SEALED			DIALLYL PHTHALATE	GOLD OVER NICKEL	11.43 mm	.02A@20VDC	PARTIAL	65 Cel	.02 A	COPPER ALLOY	-30 Cel	.186 inch	Gold (Au) - with Nickel (Ni) barrier	LATCHED	.02 A	SOLDER		1000	10 mohm		COPPER ALLOY	8		20 V		20 V	e4	.125 inch		NYLON
1825265-2	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	4PDT	SIDE TYPE	ON-ON		.02A@20VAC	GOLD	BLACK	STEEL		0 deg	500VRMS	COPPER ALLOY	15000 Cycle(s)		1000000000 ohm	TRAY	14.4 mm	9.4 inch	EPOXY TERMINAL SEALED	MAKE-BEFORE-BREAK	8.83 N		GOLD	10 mm	.02A@20VDC		85 Cel	.4 A	COPPER ALLOY	-20 Cel	.276 inch		LATCHED	.4 A	SOLDER	1		100 mohm	2.0066	COPPER ALLOY	8	2	20 V	ROHS COMPLIANT	20 V		.118 inch	0.4VA@20VAC	POLYOXYMETHYLENE
1825255-8	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	SP3T	TOP TYPE	ON-ON-ON			GOLD	BLACK						15000 Cycle(s)			TRAY	15 mm	6.2 inch	EPOXY TERMINAL SEALED		8.82 N			7.5 mm	.3A@20VDC		85 Cel	.4 A		-20 Cel	.18 inch		LATCHED	.4 A	SOLDER	1			2.0066	COPPER ALLOY			20 V	LOW PROFILE					POLYOXYMETHYLENE
25136NLDH	Apem Components	SLIDE SWITCH	THROUGH HOLE-STRAIGHT	SPDT	HIGH TYPE	ON-ON	WAVE		GOLD		GLASS FILLED NYLON		0 deg	1000VRMS	BRASS	10000 Cycle(s)		1000000000 ohm	BULK	14.1 mm	7.5 inch	EPOXY TERMINAL SEALED			THERMOPLASTIC	GOLD	8.1 mm	.1A@30VDC	PARTIAL	85 Cel		BRASS	-40 Cel	.11 inch		LATCHED	.1 A	SOLDER		25000N	10 mohm		BRASS	3	2	30 V				.15 inch		GLASS FILLED POLYAMIDE
46311LDR	Switchcraft	SLIDE SWITCH	PANEL MOUNT	SP3T	KNOB TYPE	ON-ON-ON		3A@125VAC	SILVER	BLACK	STEEL		0 deg	1000VRMS	COPPER ALLOY			1000000000 ohm		42.06 mm	13.49 inch		BREAK-BEFORE-MAKE		PHENOLIC	SILVER	8.33 mm	.5A@125VDC		70 Cel	3 A	COPPER ALLOY	-20 Cel	.344 inch	Silver (Ag)	LATCHED	.5 A	SOLDER					COPPER ALLOY		3	125 V	UL,CSA WITH MOUNTING EARS	125 V	e4	.312 inch		THERMOPLASTIC
500SSP1S1M6QEA	E-switch	SLIDE SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SLIDE	ON-ON		5A@120VAC	SILVER		STAINLESS STEEL		0 deg		COPPER ALLOY	30000 Cycle(s)		1000000000 ohm		12.7 mm	6.72 inch	EPOXY				SILVER	6.6 mm	5A@28VDC		85 Cel	5 A	COPPER ALLOY	-30 Cel	.2 inch	Silver (Ag)	LATCHED	5 A	SOLDER		500SSP1S1M6QEA	100 mohm		COPPER ALLOY	5	2	28 V		120 V	e4	.156 inch		NYLON
CUS-12TB	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-RIGHT ANGLE	SPDT	SLIDE		HAND		GOLD		LIQUID CRYSTAL POLYMER			100VAC	COPPER ALLOY	10000 Cycle(s)		100000000 ohm		6.7056 mm	1.397 inch		BREAK-BEFORE-MAKE			GOLD	2.5908 mm	0.3A@4VDC		70 Cel		COPPER ALLOY	-20 Cel	.059 inch	Gold (Au)	LATCHED	.3 A	SOLDER			70 mohm		COPPER ALLOY		2	4 V			e4			POLYAMIDE
1201-M2S3CQE2	Lamb Industries	SLIDE SWITCH	THROUGH HOLE-STRAIGHT	DPST	SLIDE	ON-ON		2A@250VAC	SILVER				0 deg	1500VAC	COPPER ALLOY	50000 Cycle(s)		1000000000 ohm		12.7 mm	11.303 inch	EPOXY			DIALLYL PHTHALATE	SILVER	9.2964 mm	5A@28VDC		85 Cel	2 A	COPPER	-30 Cel	.201 inch		MAINTAINED	5 A	SOLDER		1201	10 mohm		COPPER	6	3	28 V	APPROVALS: UL,CSA	250 V		.265 inch		NYLON
1201M2S3CQE2	C & K Components	SLIDE SWITCH	THROUGH HOLE-STRAIGHT	DPDT	HIGH TYPE		MIL-STD	6A@120VAC	SILVER	BLACK	STAINLESS STEEL			1000VRMS	COPPER ALLOY	40000 Cycle(s)		1000000000 ohm		12.7 mm	11.43 inch	EPOXY TERMINAL SEALED			DIALLYL PHTHALATE	SILVER	7.62 mm	6A@28VDC		65 Cel	6 A	COPPER ALLOY	-30 Cel	.2 inch	GOLD OVER NICKEL	LATCHED	6 A	SOLDER			10 mohm		COIN SILVER			28 V		120 V	e4			NYLON
452403012014	Wurth Elektronik	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	DPDT															TR	7.7 mm	5.5 inch			3.43 N			2.1 mm	.3A@6VDC		85 Cel			-40 Cel		Silver/Nickel (Ag/Ni)	LATCHED	.3 A	SOLDER								6 V			e4
CL-SB-22C-01	Nidec Copal Electronics	SLIDE SWITCH	THROUGH HOLE-STRAIGHT	DPDT	SLIDE				SILVER		POLYPHENYLENE SULPHIDE			500VAC	COPPER ALLOY	10000 Cycle(s)		100000000 ohm	BAG; BULK	8.5 mm	3.5 inch		BREAK-BEFORE-MAKE	2.5 N	POLYPHENYLENE SULPHIDE	SILVER	3.5 mm	.2A@12VDC		85 Cel		COPPER ALLOY	-40 Cel	.079 inch		LATCHED	.2 A	SOLDER			50 mohm		COPPER ALLOY	6	2	12 V				.118 inch		POLYAMIDE
ES03MSABE	ITT Cannon	SLIDE SWITCH	SURFACE MOUNT-RIGHT ANGLE	SPDT				.02A@20VAC								40000 Cycle(s)			TAPE AND REEL	10.03 mm	9.14 inch	EPOXY TERMINAL SEALED; IP57					6.65 mm	.02A@20VDC		85 Cel	.02 A		-30 Cel		Gold (Au) - with Nickel (Ni) barrier	LATCHED	.02 A	SOLDER		ES						20 V		20 V	e4
MLL1200S	TE Connectivity	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	SPDT	SIDE TYPE				SILVER OVER NICKEL	BLACK		BLACK	90 deg	100VAC	COPPER ALLOY	10000 Cycle(s)		100000000 ohm		6.7 mm	2.6 inch	EPOXY TERMINAL SEALED		2.7 N	LIQUID CRYSTAL POLYMER	SILVER OVER NICKEL	1.4 mm	.3A@4VDC		85 Cel		COPPER ALLOY	-20 Cel	.059 inch	Silver (Ag)	LATCHED	.3 A	SOLDER			100 mohm		COPPER ALLOY		2	4 V			e4			NYLON
MSSA22G	Apem Components	SLIDE SWITCH	THROUGH HOLE-STRAIGHT	DPDT	SLIDE		WAVE	.02A@20VAC	GOLD		THERMOPLASTIC		0 deg	250VRMS		10000 Cycle(s)	0.4VA@20VDC	100000000 ohm		9 mm	5.5 inch	EPOXY TERMINAL SEALED		3.92 N	THERMOPLASTIC	GOLD	3.4 mm	.02A@20VDC	PARTIAL	60 Cel	.02 A		-10 Cel	.079 inch	Gold (Au)	LATCHED	.02 A	SOLDER			30 mohm			6	2	20 V		20 V	e4	.118 inch		THERMOPLASTIC
SS12SBP4	Nkk Switches	SLIDE SWITCH	THROUGH HOLE-STRAIGHT	SPDT	TOP TYPE			.014A@28VAC								10000 Cycle(s)				10.2 mm	4 inch						4.5 mm	.014A@28VDC		60 Cel	.014 A		-15 Cel		Gold (Au)	LATCHED	.014 A	SOLDER		SS						28 V		28 V	e4
SS12SDH2	Nkk Switches	SLIDE SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIDE TYPE	ON-ON	WAVE		SILVER		POLYACETAL	GRAY	0 deg	500VAC	BRASS	10000 Cycle(s)		100000000 ohm		10.2 mm	4 inch	MOLDED	MAKE-BEFORE-BREAK		GLASS FILLED POLYBUTYLENE TEREPHTHALATE	SILVER	5 mm	.1A@30VDC		60 Cel		BRASS	-15 Cel	.098 inch	Gold (Au)	LATCHED	.1 A	SOLDER		SS	20 mohm		BRASS	3	3	30 V			e4	.118 inch		POLYACETAL
2-1825011-4	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	4PDT	FLUSH SIDE TYPE	ON-ON			GOLD	NATURAL						15000 Cycle(s)			TUBE	17.78 mm	7.35 inch	TAPE SEALED					4.45 mm	.02A@20VDC		80 Cel	.4 A		-40 Cel			LATCHED	.4 A	SOLDER	1			2.794	COPPER ALLOY			20 V						NYLON
CSS-1210TB	Nidec Copal Electronics	SLIDE SWITCH																																	Gold (Au)														e4
1825194-1	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	SP3T	EXTENDED TOP TYPE	ON-ON-ON		.3A@125VAC	SILVER	BLACK						15000 Cycle(s)			TRAY	24 mm	9.4 inch	EPOXY TERMINAL SEALED		8.83 N			10.11 mm	.02A@20VDC		85 Cel	.3 A		-20 Cel	.4 inch		LATCHED	.3 A	SOLDER	1			1.9812	COPPER ALLOY			20 V		125 V				NYLON
CAS-120TB	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	SPDT															TAPE AND REEL	5.4 mm	2.5 inch	TAPE SEALED; WATER PROOF		5 N			2.5 mm	.025A@24VDC		85 Cel			-40 Cel		GOLD	LATCHED	.025 A	SOLDER								24 V	LOW PROFILE		e4
CJS-1200A2	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	SPDT												200 Cycle(s)			BAG	5.4 mm	2.5 inch	TAPE SEALED		5.9 N			2.4 mm	.1A@6VDC		85 Cel			-40 Cel		Gold (Au)	LATCHED	.1 A	SOLDER								6 V			e4
25536NA	Apem Components	SLIDE SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SIDE TYPE	ON-ON	WAVE	2A@250VAC	SILVER		GLASS FILLED NYLON		0 deg	1000VRMS	SILVER	10000 Cycle(s)		1000000000 ohm	BULK	14.1 mm	7.5 inch	EPOXY TERMINAL SEALED			THERMOPLASTIC	SILVER	8.1 mm	1A@30VDC	PARTIAL	85 Cel	2 A	SILVER	-40 Cel	.091 inch		LATCHED	1 A	SOLDER			10 mohm		SILVER	3	2	30 V		250 V		.15 inch		GLASS FILLED POLYAMIDE
EG1213	E-switch	SLIDE SWITCH	THROUGH HOLE-RIGHT ANGLE	SPDT	SLIDE				SILVER					500VAC	COPPER ALLOY	10000 Cycle(s)		100000000 ohm		10 mm	3.8 inch		BREAK-BEFORE-MAKE			SILVER	5 mm	0.2A@30VDC		70 Cel		COPPER ALLOY	-20 Cel	.197 inch	Silver (Ag)	LATCHED	.2 A	SOLDER			20 mohm		COPPER ALLOY	5	2	30 V	ROHS COMPLIANT		e4	.114 inch
ES02MSABE	ITT Cannon	SLIDE SWITCH	SURFACE MOUNT-RIGHT ANGLE	SPST				.02A@20VAC								40000 Cycle(s)			TAPE AND REEL	10.03 mm	9.14 inch	EPOXY TERMINAL SEALED; IP57					6.65 mm	.02A@20VDC		85 Cel	.02 A		-30 Cel		Gold (Au) - with Nickel (Ni) barrier	LATCHED	.02 A	SOLDER		ES						20 V		20 V	e4

Slide Switches

Slide switches are electronic switches that are activated by sliding a lever back and forth. They are commonly used in a variety of applications, such as consumer electronics, industrial control systems, and home appliances.

Slide switches typically consist of a housing, a slider lever, and a set of electrical contacts. When the lever is slid in one direction, it completes a circuit between the contacts, allowing electrical current to flow through the switch. When the lever is slid in the opposite direction, the circuit is broken and the current stops flowing.

Slide switches come in different configurations, including single-pole, double-pole, and multi-pole switches. They also come in different contact arrangements, such as make-before-break, break-before-make, and center-off switches.

Slide switches offer several advantages over other types of switches. They provide a simple and intuitive means of controlling circuits, and they offer tactile feedback that can help to ensure reliable operation. They are also highly durable and can withstand frequent use and harsh environments.