Image shown is a representation only.
| Manufacturer | Nkk Switches |
|---|---|
| Manufacturer's Part Number | SS12SDH2 |
| Description | SLIDE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIDE TYPE; Contact Function: ON-ON; Solderability: WAVE; |
| Datasheet | SS12SDH2 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .1 A |
| No. of Positions: | 3 |
| Center Contact Plating: | SILVER |
| Center Contact Material: | BRASS |
| Housing Material: | POLYACETAL |
| Body Color: | GRAY |
| Type (Actuator): | SIDE TYPE |
| Solderability: | WAVE |
| Terminal Finish: | Gold (Au) |
| Switch Action: | LATCHED |
| Terminal Material: | BRASS |
| Termination Type: | SOLDER |
| Electrical Life: | 10000 Cycle(s) |
| Maximum Operating Temperature: | 60 Cel |
| Manufacturer Series: | SS |
| Material (Actuator): | POLYACETAL |
| Contact Resistance: | 20 mohm |
| Insulation Resistance: | 100000000 ohm |
| End Contact Material: | BRASS |
| Angle (Actuator): | 0 deg |
| Other Names: | 360-2134 |
| Maximum DC Contact Voltage: | 30 V |
| DC Maximum Rating R Load (Contact): | .1A@30VDC |
| Dielectric Withstand Volts (V): | 500VAC |
| Contact Function: | ON-ON |
| PCB Hole Count: | 3 |
| Switch Type: | SLIDE SWITCH |
| Sealing: | MOLDED |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -15 Cel |
| Mounting Feature: | THROUGH HOLE-RIGHT ANGLE |
| Body Width: | 4 inch |
| Switch Function: | SPDT |
| Contact Timing: | MAKE-BEFORE-BREAK |
| Terminal Length: | .118 inch |
| Length (Actuator): | .098 inch |
| End Contact Plating: | SILVER |
| Insulator Material: | GLASS FILLED POLYBUTYLENE TEREPHTHALATE |
| Body Height: | 5 mm |
| Body Length/Diameter: | 10.2 mm |
