5076CSL002 by Alpha Wire | Connector Accessories

Image shown is a representation only.

Manufacturer	Alpha Wire
Manufacturer's Part Number	5076CSL002
Description	WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Resistance: .014 ohm; Conductor Finish: TIN; Approvals (V): CE; CSA; IEC; UL;
Datasheet	5076CSL002 Datasheet

NAME	DESCRIPTION
Wire Gauge (AWG):	16
Construction:	STRANDED
Jacket Material:	POLYVINYLCHLORIDE
IEC Conformity:	NO
Approvals (V):	CE; CSA; IEC; UL
Shielding:	NO
Minimum Operating Temperature:	-30 Cel
Rated Voltage:	300 V
Cross Section Area:	1.309 mm2
Conductor Finish:	TIN
Resistance:	.014 ohm
MIL Conformity:	NO
Length:	152.4 mm
Wire & Cable Name:	FLEXIBLE CORD AND FIXTURE WIRE
Connector Accessory Type:	WIRE AND CABLE
Insulator Material:	POLYVINYLCHLORIDE
No. of Conductors:	6
Conductor Material:	COPPER ALLOY
Maximum Operating Temperature:	105 Cel
DIN Conformity:	NO
Stranding:	19X.0117
Diameter:	9.04 mm

Popular Products

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.