Image shown is a representation only.
| Manufacturer | Apem Components |
|---|---|
| Manufacturer's Part Number | 9532CD |
| Description | PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): PLUNGER; Insulator Material: PA9T; Body Height: 8 mm; |
| Datasheet | 9532CD Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .1 A |
| Center Contact Plating: | GOLD |
| Center Contact Material: | BRASS |
| Length (Bushing): | .118 inch |
| Housing Material: | PA9T |
| Type (Actuator): | PLUNGER |
| Actuator Travel (mm): | 1.75 |
| Switch Action: | MOMENTARY |
| Terminal Material: | BRASS |
| Termination Type: | SOLDER LUG |
| Electrical Life: | 100000 Cycle(s) |
| Maximum Operating Temperature: | 65 Cel |
| Material (Actuator): | GLASS FILLED POLYAMIDE |
| Contact Resistance: | 30000 mohm |
| Insulation Resistance: | 1000000000 ohm |
| End Contact Material: | BRASS |
| Maximum DC Contact Voltage: | 30 V |
| DC Maximum Rating R Load (Contact): | 0.1A@30VDC |
| Dielectric Withstand Volts (V): | 1000VRMS |
| Switch Type: | PUSHBUTTON SWITCH |
| Sealing: | EPOXY TERMINAL SEALED |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | PANEL MOUNT-THREADED |
| Switch Function: | SPST |
| Terminal Length: | .118 inch |
| Length (Actuator): | .137 inch |
| End Contact Plating: | GOLD |
| Insulator Material: | PA9T |
| Body Height: | 8 mm |
| Body Length/Diameter: | 6.5 mm |
| Diameter (Bushing): | .165 inch |
