Image shown is a representation only.
| Manufacturer | Apem Components |
|---|---|
| Manufacturer's Part Number | IPR1SAD2L0G |
| Description | PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PUSHBUTTON; Contact Function: OFF-ON; Diameter (Bushing): .472 inch; |
| Datasheet | IPR1SAD2L0G Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .1 A |
| Center Contact Plating: | GOLD |
| Center Contact Material: | SILVER |
| Length (Bushing): | .322 inch |
| Body Color: | BLACK |
| Type (Actuator): | PUSHBUTTON |
| Maximum AC Contact Voltage: | 125 V |
| Actuator Travel (mm): | 2.4892 |
| Switch Action: | LATCHED |
| Termination Type: | SOLDER LUG |
| Electrical Life: | 200000 Cycle(s) |
| Illumination: | LED |
| Maximum Operating Temperature: | 85 Cel |
| Manufacturer Series: | IP |
| Material (Actuator): | POLYAMIDE |
| Contact Resistance: | 100 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Color (Actuator): | BLACK |
| Maximum AC Contact Current: | 2 A |
| End Contact Material: | SILVER |
| Angle (Actuator): | 0 deg |
| Maximum DC Contact Voltage: | 24 V |
| DC Maximum Rating R Load (Contact): | 0.1A@24VDC |
| Dielectric Withstand Volts (V): | 1500VAC |
| Contact Function: | OFF-ON |
| Switch Type: | PUSHBUTTON SWITCH |
| AC Maximum Rating R Load (Contact): | 2A@125VAC |
| Sealing: | EPOXY |
| Minimum Operating Temperature: | -40 Cel |
| Mounting Feature: | PANEL MOUNT |
| Switch Function: | SPST |
| Terminal Length: | .125 inch |
| Length (Actuator): | .275 inch |
| End Contact Plating: | GOLD |
| Insulator Material: | POLYAMIDE |
| Body Height: | 15.9766 mm |
| Body Length/Diameter: | 17.4752 mm |
| Diameter (Bushing): | .472 inch |
