Image shown is a representation only.
| Manufacturer | C & K Components |
|---|---|
| Manufacturer's Part Number | 1201M1S3ZQE2 |
| Description | SLIDE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): HIGH TYPE; Solderability: MIL-STD; JESD-609 Code: e4; |
| Datasheet | 1201M1S3ZQE2 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | 6 A |
| Center Contact Plating: | SILVER |
| Center Contact Material: | COPPER ALLOY |
| Housing Material: | STAINLESS STEEL |
| Type (Actuator): | HIGH TYPE |
| Maximum AC Contact Voltage: | 120 V |
| Solderability: | MIL-STD |
| Terminal Finish: | GOLD OVER NICKEL |
| Switch Action: | LATCHED |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | SOLDER |
| Electrical Life: | 40000 Cycle(s) |
| Maximum Operating Temperature: | 65 Cel |
| Material (Actuator): | NYLON |
| Contact Resistance: | 10 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Color (Actuator): | BLACK |
| Maximum AC Contact Current: | 6 A |
| End Contact Material: | COIN SILVER |
| Maximum DC Contact Voltage: | 28 V |
| DC Maximum Rating R Load (Contact): | 6A@28VDC |
| Dielectric Withstand Volts (V): | 1000VRMS |
| Switch Type: | SLIDE SWITCH |
| AC Maximum Rating R Load (Contact): | 6A@120VAC |
| Sealing: | EPOXY TERMINAL SEALED |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | PANEL MOUNT |
| Body Width: | 11.43 inch |
| Switch Function: | DPDT |
| Length (Actuator): | .2 inch |
| End Contact Plating: | SILVER |
| Insulator Material: | DIALLYL PHTHALATE |
| Body Height: | 7.62 mm |
| Body Length/Diameter: | 12.7 mm |









