Image shown is a representation only.
| Manufacturer | ITT Cannon |
|---|---|
| Manufacturer's Part Number | 7303P3YCBE |
| Description | TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: 3PDT; Type (Actuator): PADDLE; Contact Function: ON-OFF-ON; Solderability: MIL-STD; |
| Datasheet | 7303P3YCBE Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Center Contact Plating: | GOLD OVER NICKEL |
| Center Contact Material: | COPPER ALLOY |
| Type (Bushing): | 1/4-40 |
| Length (Bushing): | .35 inch |
| Housing Material: | STAINLESS STEEL |
| Type (Actuator): | PADDLE |
| Solderability: | MIL-STD |
| Terminal Finish: | GOLD/NICKEL |
| Finish (Actuator): | BRIGHT CHROME |
| Switch Action: | HORIZONTAL |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | SOLDER |
| Electrical Life: | 40000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Manufacturer Series: | 7300 |
| Material (Actuator): | BRASS |
| Contact Resistance: | 10 mohm |
| Insulation Resistance: | 1000000000 ohm |
| End Contact Material: | COPPER ALLOY |
| Angle (Actuator): | 25 deg |
| Dielectric Withstand Volts (V): | 1000VRMS |
| Contact Function: | ON-OFF-ON |
| PCB Hole Count: | 9 |
| DC Maximum Power Rating R Load (Contact): | 0.4VA@20VDC |
| Switch Type: | TOGGLE SWITCH |
| Sealing: | EPOXY |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | THROUGH HOLE-RIGHT ANGLE |
| Body Width: | 16.51 inch |
| Switch Function: | 3PDT |
| Contact Timing: | BREAK-BEFORE-MAKE |
| Terminal Length: | .25 inch |
| Length (Actuator): | .45 inch |
| End Contact Plating: | GOLD OVER NICKEL |
| Insulator Material: | GLASS FILLED NYLON |
| Body Height: | 37.211 mm |
| Body Length/Diameter: | 12.7 mm |
| Diameter (Bushing): | .25 inch |
