Gull Wing Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
LM2901VDG	Onsemi	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		15 mV	500 nA	Yes	4	BIPOLAR		2.5 mA			5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Tin	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.341 in (8.65 mm)
LM393PWE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR		2.5 mA			5 V	5/30 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LMC7215QIM5/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		8 mV	0.05 pA	Yes	1	CMOS	AEC-Q100	1 μA		Tape And Reel	5 V	2.7/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	10 V	0.037 in (0.95 mm)	85 °C (185 °F)	0.05 pA	12.2 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e3		260 °C (500 °F)	0.114 in (2.9 mm)
LMV393S-13	Diodes Incorporated	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	2	BICMOS					5 V		Small Outline		Comparators	5.5 V		125 °C (257 °F)		300 ns	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8					e3		260 °C (500 °F)
LMV7239M5	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	8 mV	600 nA	Yes	1	BIPOLAR		95 μA	0 V	Tape And Reel	2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.038 in (0.953 mm)	85 °C (185 °F)	400 nA	68 ns	Push-Pull	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.047 in (1.19 mm)	0.063 in (1.6 mm)	No	e0		260 °C (500 °F)	0.115 in (2.92 mm)
LMV7271MG/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy	0 V	4 mV	100 nA	Yes	1	BICMOS		14 μA	0 V	Tape And Reel	1.8 V	1.8/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	100 nA	1.8 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3		260 °C (500 °F)	0.079 in (2 mm)
LT1018CSW#PBF	Analog Devices	Comparator	Commercial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-20 V	1.4 mV	100 nA	Yes	2				0 V		4.5 V		Small Outline		Comparators	40 V	0.05 in (1.27 mm)	70 °C (158 °F)			Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G16	1	0.104 in (2.642 mm)	0.295 in (7.493 mm)	No	e3	30 s	260 °C (500 °F)	0.406 in (10.3 mm)
LT1720IS8#TRPBF	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		4.5 mV	-6 uA	Yes	2	BIPOLAR				Tape And Reel	5 V		Small Outline		Comparators	7 V	0.05 in (1.27 mm)	85 °C (185 °F)		7 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.752 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LT6700CS6-2#TRPBF	Analog Devices	Comparator	Commercial	Gull Wing	6	VSSOP	Rectangular	Plastic/Epoxy			15 nA	Yes	2					Tape And Reel	5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	18.5 V	0.037 in (0.95 mm)	70 °C (158 °F)		29 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G6	1	0.039 in (1 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
LT6700HVCS6-3#TRMPBF	Analog Devices	Comparator	Commercial	Gull Wing	6	VSSOP	Rectangular	Plastic/Epoxy			15 nA	Yes	2					Tape And Reel	5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	18.5 V	0.037 in (0.95 mm)	70 °C (158 °F)		29 µs	Open-Collector	0 °C (32 °F)	Matte Tin	Dual	R-PDSO-G6	1	0.039 in (1 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
LT6700HVIS6-1#TRMPBF	Analog Devices	Comparator	Industrial	Gull Wing	6	VSSOP	Rectangular	Plastic/Epoxy			15 nA	Yes	2					Tape And Reel	5 V		Small Outline, Very Thin Profile, Shrink Pitch		Comparators	18.5 V	0.037 in (0.95 mm)	85 °C (185 °F)		29 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G6	1	0.039 in (1 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
LTC1445IS#TR	Analog Devices	Comparator	Industrial	Gull Wing	16	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	4				0 V	Tape And Reel	3 V		Small Outline		Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G16	1	0.069 in (1.752 mm)	0.154 in (3.899 mm)	No	e0			0.39 in (9.906 mm)
MAX9018BEKA+	Analog Devices	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	2	BICMOS		2.8 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.1	Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)	1 nA	31 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX903ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	Yes	1	CMOS		6 mA	-5 V		5 V	5,5/10,GND/-5 V	Small Outline	SOP8,.3	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 uA	10 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0	20 s	240 °C (464 °F)	0.193 in (4.9 mm)
MAX903ESA+	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-6 V	6 mV	15 uA	Yes	1	CMOS		6 mA	-5 V		5 V	5,5/10,GND/-5 V	Small Outline	SOP8,.3	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	10 uA	10 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
MAX9118EXK	Maxim Integrated	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1						5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		45 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e0			0.079 in (2 mm)
MAX9118EXK+	Analog Devices	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		10 mV	2 nA	Yes	1						5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	6 V	0.026 in (0.65 mm)	85 °C (185 °F)		45 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)		e3	30 s	260 °C (500 °F)	0.079 in (2 mm)
MAX9140EUK-T	Maxim Integrated	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		4.5 mV	320 nA	Yes	1	BIPOLAR		300 μA			5 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	320 nA			-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e0		245 °C (473 °F)	0.114 in (2.9 mm)
MAX9140EUK+T	Analog Devices	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		4.5 mV	320 nA	Yes	1	BIPOLAR		300 μA			5 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	85 °C (185 °F)	320 nA			-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.064 in (1.625 mm)	No	e3	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
MAX923ESA	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	-0.3 V	10 mV		Yes	2	CMOS		6 μA			3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX923ESA+	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV		Yes	2	CMOS		6 μA			3 V	±1.25/±5.5/2.5/11 V	Small Outline	SOP8,.25	Comparators	12 V	0.05 in (1.27 mm)	85 °C (185 °F)		14 µs		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1			No	e3	30 s	260 °C (500 °F)
MAX944CSD	Maxim Integrated	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	4	BIPOLAR		2.4 mA			3 V	3/5 V	Small Outline	SOP14,.25	Comparators	6.5 V	0.05 in (1.27 mm)	70 °C (158 °F)		80 ns	Push-Pull	0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0		245 °C (473 °F)	0.341 in (8.65 mm)
MAX944CSD+	Analog Devices	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	4	BIPOLAR		600 μA			3 V	3/5 V	Small Outline	SOP14,.25	Comparators	6.5 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	80 ns		0 °C (32 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MAX944CSD-T	Maxim Integrated	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	4	BIPOLAR		600 μA			3 V	3/5 V	Small Outline	SOP14,.25	Comparators	6.5 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	80 ns		0 °C (32 °F)	Tin Lead	Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.341 in (8.65 mm)
MAX944CSD+T	Analog Devices	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		3 mV	300 nA	Yes	4	BIPOLAR		600 μA			3 V	3/5 V	Small Outline	SOP14,.25	Comparators	6.5 V	0.05 in (1.27 mm)	70 °C (158 °F)	300 nA	80 ns		0 °C (32 °F)	Matte Tin - annealed	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
MAX975ESA-T	Maxim Integrated	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	-300 nA	Yes	1	CMOS		5 μA			5 V	3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	28 ns		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e0			0.193 in (4.9 mm)
MAX975ESA+T	Analog Devices	Comparator	Industrial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		3 mV	-300 nA	Yes	1	CMOS		5 μA			5.25 V	3/5 V	Small Outline	SOP8,.25	Comparators	6 V	0.05 in (1.27 mm)	85 °C (185 °F)	300 nA	28 ns		-40 °C (-40 °F)	Matte Tin - annealed	Dual	R-PDSO-G8	1			No	e3	30 s	260 °C (500 °F)
MAX9963BGCCQ-TD	Maxim Integrated	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR			-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e0			0.551 in (14 mm)
MAX9963BGCCQ+TD	Analog Devices	Comparator	Commercial	Gull Wing	100	HTFQFP	Square	Plastic/Epoxy	-7 V	100 mV	25 uA	Yes	4	BIPOLAR			-5.25 V		9.75 V		Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch		Comparators	11.5 V	0.02 in (0.5 mm)	70 °C (158 °F)		2.2 ns	Open-Collector	0 °C (32 °F)	Matte Tin - annealed	Quad	S-PQFP-G100	3	0.047 in (1.2 mm)	0.551 in (14 mm)	No	e3	30 s	260 °C (500 °F)	0.551 in (14 mm)
MCP6542T-E/MSV02	Microchip Technology	Comparator		Gull Wing	8	TSSOP	Square	Plastic/Epoxy		7 mV	5 nA	Yes	2	CMOS		20 μA		Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)		4 µs	Push-Pull	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)					0.118 in (3 mm)
MCP6567T-E/SN	Microchip Technology	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		10 mV	5 nA	Yes	2	CMOS		130 μA		Tape And Reel	1.8 V	2/5 V	Small Outline	SOP8,.25	Comparators	6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)	5 nA	56 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	3	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3	40	260 °C (500 °F)	0.193 in (4.9 mm)
MIC6270YM5	Microchip Technology	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy	0 V	9 mV	400 nA	Yes	1				0 V		5 V		Small Outline, Low Profile, Shrink Pitch		Comparators	36 V	0.037 in (0.95 mm)	85 °C (185 °F)		600 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e4		260 °C (500 °F)	0.114 in (2.9 mm)
NCS2201SN1T1G	Onsemi	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular	Plastic/Epoxy		8 mV	10 nA	Yes	1	CMOS		17 μA			3 V	1/5 V	Small Outline, Thin Profile, Shrink Pitch	TSOP6,.11,37	Comparators	6 V	0.037 in (0.95 mm)	105 °C (221 °F)		1.1 µs		-40 °C (-40 °F)	Tin	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.059 in (1.5 mm)	No	e3		260 °C (500 °F)	0.118 in (3 mm)
PTLV7034PWR	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		8 mV	2 pA	Yes	4			3 μA		Tape And Reel	1.8 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	7 V	0.026 in (0.65 mm)	125 °C (257 °F)		3 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)					0.197 in (5 mm)
TA75S393F(TE85L,F)	Toshiba	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		5 mV	50 nA	Yes	1	BIPOLAR		800 μA			5 V	±1/±18/2/36 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	36 V	0.037 in (0.95 mm)	85 °C (185 °F)	50 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G5	1	0.055 in (1.4 mm)	0.063 in (1.6 mm)	No		10 s	260 °C (500 °F)	0.114 in (2.9 mm)
TA75W393FU	Toshiba	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	2	BIPOLAR		2 mA			5 V	±1/±18/2/36 V	Small Outline, Low Profile, Shrink Pitch	TSSOP8,.16	Comparators	36 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.051 in (1.3 mm)	0.11 in (2.8 mm)	No				0.114 in (2.9 mm)
TA75W393FU(T2LPPF)	Toshiba	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	2			2 mA			5 V		Small Outline, Low Profile, Shrink Pitch	SOP8,.16,51	Comparators	36 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.051 in (1.3 mm)	0.11 in (2.8 mm)					0.114 in (2.9 mm)
TA75W393FU(TE12L)	Toshiba	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	2	BIPOLAR		2 mA				±1/±18/2/36 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.16	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	250 nA	1.3 µs		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
TA75W393FU(TE12L,F)	Toshiba	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	2	BIPOLAR		2 mA				±1/±18/2/36 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.16	Comparators		0.025 in (0.635 mm)	85 °C (185 °F)	250 nA	1.3 µs		-40 °C (-40 °F)		Dual	R-PDSO-G8				No
TA75W393FU,LF(B	Toshiba	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		5 mV		Yes	2			2 mA			5 V		Small Outline, Low Profile, Shrink Pitch	SOP8,.16,51	Comparators	36 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.051 in (1.3 mm)	0.11 in (2.8 mm)					0.114 in (2.9 mm)
TLC3702CDG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		50 μA			5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	600 pA	2.7 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLV2354IPWLE	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		800 μA			3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	8 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 nA	640 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No				0.197 in (5 mm)
TLV3401IDR	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	1			640 nA	0 V	Tape And Reel	5 V	±1.35/±8/2.7/16 V	Small Outline	SOP8,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 pA	175 µs	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
TLV3704CPW	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	4	CMOS		3.2 μA	0 V	Tube	2.7 V	±1.25/±8/2.5/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	17 V	0.026 in (0.65 mm)	70 °C (158 °F)	100 pA	240 µs	Push-Pull	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
TLV6703DDCT	Texas Instruments	Comparator	Automotive	Gull Wing	6	TSOP	Rectangular	Plastic/Epoxy		3 mV	25 nA	Yes	1			13 μA			5 V		Small Outline, Thin Profile		Comparators	20 V	0.037 in (0.95 mm)	125 °C (257 °F)	25 nA	29 µs	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G6	2	0.043 in (1.1 mm)	0.063 in (1.6 mm)		e4		260 °C (500 °F)	0.114 in (2.9 mm)
TLV9022DGKR	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Square	Plastic/Epoxy		2 mV		Yes	2			70 μA		Tape And Reel, 13 Inch	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19		6 V	0.026 in (0.65 mm)	125 °C (257 °F)		150 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)		e3		260 °C (500 °F)	0.118 in (3 mm)
TS332IST	STMicroelectronics	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		6 mV	100 nA	Yes	2			38 μA		Tape And Reel	1.8 V	1.8/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)		420 ns	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
TS3702IPT	STMicroelectronics	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		25 μA		Tape And Reel	3 V	±1.35/±8/2.7/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)		15 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.173 in (4.4 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.