Gull Wing Comparators 2,400+

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

AS393MTR-G1

Diodes Incorporated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

400 nA

Yes

2

BIPOLAR

3 mA

Tape And Reel

5 V

±1/±18/2/36 V

Small Outline

SOP8,.25

Comparators

40 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

BA10339F-E2

ROHM

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

5 mV

250 nA

Yes

4

BIPOLAR

2 mA

5 V

±1.5/±18/3/36 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Tin Copper

Dual

R-PDSO-G14

0.063 in (1.6 mm)

0.173 in (4.4 mm)

No

e2

10 s

260 °C (500 °F)

0.343 in (8.7 mm)

BA82903YF-CE2

ROHM

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

9 mV

275 nA

Yes

2

AEC-Q100

5 V

Small Outline

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

1.3 ns

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.067 in (1.71 mm)

0.173 in (4.4 mm)

0.197 in (5 mm)

LM211QDG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

4 mV

150 nA

Yes

1

BIPOLAR

6 mA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 nA

115 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

LM239AQDREP

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

2.5 mV

-400 nA

Yes

4

BIPOLAR

2 mA

0 V

Tape And Reel

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector, Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LM2901AVQDRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

4 mV

-500 nA

Yes

4

BIPOLAR

AEC-Q100

2.5 mA

Tape And Reel

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

-250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

LM2901PW

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

7 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

Tube

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LM2901PWE4

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

15 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LM2901PWLE

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

4

BIPOLAR

2.5 mA

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

0.197 in (5 mm)

LM2903HYDT

STMicroelectronics

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

15 mV

400 nA

Yes

2

BIPOLAR

AEC-Q100

2.5 mA

0 V

Tape And Reel

5 V

±1/±18/2/36 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

150 °C (302 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM2903QDRG4Q1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

-500 nA

Yes

2

BIPOLAR

AEC-Q100

1 mA

0 V

Tape And Reel

5 V

5/30 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM2903ST

STMicroelectronics

Comparator

Gull Wing

8

HTSSOP

Square

Plastic/Epoxy

15 mV

400 nA

Yes

2

BIPOLAR

2.5 mA

Tape And Reel

5 V

Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch

TSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

LM2903VQDRG4Q1

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

7 mV

-500 nA

Yes

2

BIPOLAR

AEC-Q100

1 mA

0 V

Tape And Reel

5 V

5/32 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM393PS

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

9 mV

-400 nA

Yes

2

BIPOLAR

2.5 mA

0 V

5 V

5 V

Small Outline

SOP8,.3

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.244 in (6.2 mm)

LM393PSLE

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

9 mV

-400 nA

Yes

2

BIPOLAR

2.5 mA

5 V

5 V

Small Outline

SOP8,.3

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

250 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Dual

R-PDSO-G8

0.079 in (2 mm)

0.209 in (5.3 mm)

No

0.244 in (6.2 mm)

LMV339IPW

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

4

BIPOLAR

400 μA

Tube

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

LMV393IPWE4

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

250 μA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

LMV393IPWG4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

300 μA

Tube

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.173 in (4.4 mm)

LMV393IPWRE4

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

250 μA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

LMV7239M7

Texas Instruments

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

0 V

8 mV

600 nA

Yes

1

BIPOLAR

95 μA

0 V

Tape And Reel

2.7 V

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

400 nA

68 ns

Push-Pull

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

260 °C (500 °F)

0.079 in (2 mm)

LMV7271MG

Texas Instruments

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

0 V

4 mV

100 nA

Yes

1

BICMOS

14 μA

0 V

Tape And Reel

1.8 V

1.8/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

100 nA

1.8 µs

Push-Pull

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

260 °C (500 °F)

0.079 in (2 mm)

LP211DRE4

Texas Instruments

Comparator

Other

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

10 mV

150 nA

Yes

1

BIPOLAR

300 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

100 nA

1.2 µs

Open-Collector, Open-Emitter

-25 °C (-13 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

LP211DRG4

Texas Instruments

Comparator

Other

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

7.5 mV

150 nA

Yes

1

300 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

100 nA

1.2 µs

Open-Collector

-25 °C (-13 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LPV7215MF/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

3.2 mV

1 pA

Yes

1

BICMOS

1.03 μA

0 V

Tape And Reel

2.7 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

125 °C (257 °F)

1 pA

15 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.048 in (1.22 mm)

0.063 in (1.6 mm)

No

e3

260 °C (500 °F)

0.115 in (2.92 mm)

LT1116CS8#TRPBF

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

3.5 mV

20 uA

Yes

1

-5 V

Tape And Reel

5 V

Small Outline

Comparators

7 V

0.05 in (1.27 mm)

70 °C (158 °F)

12 ns

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

LT1671CMS8#TRPBF

Analog Devices

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-7 V

4 mV

350 nA

Yes

1

-5 V

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

7 V

0.026 in (0.65 mm)

70 °C (158 °F)

85 ns

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.046 in (1.17 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT1671CS8#PBF

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-7 V

4 mV

350 nA

Yes

1

-5 V

5 V

Small Outline

Comparators

7 V

0.05 in (1.27 mm)

70 °C (158 °F)

85 ns

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

LT1714CGN

Analog Devices

Comparator

Commercial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

-6.3 V

4 mV

5 uA

Yes

2

18 mA

-5 V

5 V

Small Outline, Shrink Pitch

Comparators

6.3 V

0.025 in (0.635 mm)

70 °C (158 °F)

2 uA

8.5 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G16

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

e0

0.192 in (4.889 mm)

LT1719CS6#TR

Analog Devices

Comparator

Commercial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

3.5 mV

0 uA

Yes

1

BIPOLAR

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

7 V

0.037 in (0.95 mm)

70 °C (158 °F)

7 ns

Open-Collector

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

LT1721CGN#PBF

Analog Devices

Comparator

Commercial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

4.5 mV

-6 uA

Yes

4

BIPOLAR

5 V

Small Outline, Shrink Pitch

Comparators

7 V

0.025 in (0.635 mm)

70 °C (158 °F)

7 ns

Push-Pull

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9116 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LTC6752ISC6-1#TRPBF

Analog Devices

Comparator

Industrial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

8.5 mV

2.1 uA

Yes

1

CMOS

5.9 mA

Tape And Reel

2.5 V

Small Outline, Very Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

3.6 V

0.026 in (0.65 mm)

85 °C (185 °F)

1.25 uA

2.9 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.049 in (1.25 mm)

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

LTC6752MPS5#TRPBF

Analog Devices

Comparator

Military

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

8.5 mV

2.1 uA

Yes

1

CMOS

5.9 mA

Tape And Reel

2.5 V

Small Outline, Very Thin Profile, Shrink Pitch

TSOP5,.11,37

Comparators

3.6 V

0.037 in (0.95 mm)

125 °C (257 °F)

1.25 uA

2.9 ns

-55 °C (-67 °F)

Matte Tin

Dual

R-PDSO-G5

0.039 in (1 mm)

0.064 in (1.625 mm)

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

MAX9064EUK+T

Analog Devices

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

15 nA

Yes

1

BICMOS

1.1 μA

3.3 V

3.3 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

85 °C (185 °F)

15 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

MAX907CSA

Maxim Integrated

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

3.5 mV

500 nA

Yes

2

BIPOLAR

1.2 mA

5 V

5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

70 °C (158 °F)

300 nA

45 ns

0 °C (32 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

20 s

240 °C (464 °F)

0.193 in (4.9 mm)

MAX907CSA+

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

3 mV

500 nA

Yes

2

BIPOLAR

1 mA

5 V

5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

70 °C (158 °F)

300 nA

45 ns

0 °C (32 °F)

Matte Tin - annealed

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MAX921ESA/GH9

Maxim Integrated

Comparator

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

Yes

1

4 μA

3 V

Small Outline

SOP8,.25

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

14 µs

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

0.193 in (4.9 mm)

MAX963ESD

Maxim Integrated

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

2 mV

15 uA

Yes

2

CMOS

22 mA

3 V

3/5 V

Small Outline

SOP14,.25

Comparators

5.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

15 uA

4.5 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.341 in (8.65 mm)

MAX963ESD+

Analog Devices

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

2 mV

15 uA

Yes

2

CMOS

22 mA

3 V

3/5 V

Small Outline

SOP14,.25

Comparators

5.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

15 uA

4.5 ns

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

MAX963ESD-T

Maxim Integrated

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

2 mV

15 uA

Yes

2

CMOS

22 mA

3 V

3/5 V

Small Outline

SOP14,.25

Comparators

5.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

15 uA

4.5 ns

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.341 in (8.65 mm)

MAX963ESD+T

Analog Devices

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

2 mV

15 uA

Yes

2

CMOS

22 mA

3 V

3/5 V

Small Outline

SOP14,.25

Comparators

5.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

15 uA

4.5 ns

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

MAX976ESA

Maxim Integrated

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

3 mV

300 nA

Yes

2

CMOS

1.3 mA

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 nA

28 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

20 s

240 °C (464 °F)

0.193 in (4.9 mm)

MAX976ESA+

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

3 mV

300 nA

Yes

2

CMOS

650 μA

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

300 nA

28 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MAX985EUK-T

Maxim Integrated

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

10 nA

Yes

1

24 μA

0 V

5 V

±1.5/±2.5/3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

85 °C (185 °F)

10 nA

300 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e0

20 s

240 °C (464 °F)

0.114 in (2.9 mm)

MAX985EUK+T

Analog Devices

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

10 nA

Yes

1

24 μA

0 V

5 V

±1.5/±2.5/3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

85 °C (185 °F)

10 nA

300 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

MAX985EUK-TG002

Maxim Integrated

Comparator

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

7 mV

10 nA

Yes

1

24 μA

Tape And Reel

2.7 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

6 V

0.037 in (0.95 mm)

85 °C (185 °F)

10 nA

450 ns

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.064 in (1.625 mm)

0.114 in (2.9 mm)

MIC841LBC5TR

Micrel

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

Yes

1

Tape And Reel

1.6 V

Small Outline, Thin Profile, Shrink Pitch

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

12 µs

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

0.079 in (2 mm)

NCX2200GW

NXP Semiconductors

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

30 mV

Yes

1

3 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

800 ns

-40 °C (-40 °F)

Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

30 s

260 °C (500 °F)

0.081 in (2.05 mm)

PLM339BIDR

Texas Instruments

Comparator

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

3.5 mV

50 nA

Yes

4

BIPOLAR

1.6 mA

Tape And Reel

5 V

Small Outline

SOP14,.24

38 V

0.05 in (1.27 mm)

85 °C (185 °F)

25 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G14

0.069 in (1.75 mm)

0.154 in (3.9 mm)

0.341 in (8.65 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.