Gull Wing Comparators 2,400+

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

TS3704CDT

STMicroelectronics

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

6.5 mV

600 pA

Yes

4

CMOS

100 μA

Tape And Reel

3 V

5 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

1.2 µs

Push-Pull

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

40

260 °C (500 °F)

0.341 in (8.65 mm)

TS862IPT

STMicroelectronics

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

18 mV

600 pA

Yes

2

BICMOS

16 μA

Tape And Reel

5 V

2.7/10 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

12 V

0.026 in (0.65 mm)

85 °C (185 °F)

300 pA

2 µs

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

0.173 in (4.4 mm)

ADCMP391ARZ

Analog Devices

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

5 mV

80 nA

Yes

1

5 V

Small Outline

Comparators

6 V

0.05 in (1.27 mm)

125 °C (257 °F)

4.9 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADCMP601BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

BIPOLAR

Tape And Reel

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

5 ns

Push-Pull

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

ADCMP604BKSZ-RL

Analog Devices

Comparator

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

5 mV

5 uA

Yes

1

21 mA

Tape And Reel

2.5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

5 uA

3 ns

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e4

260 °C (500 °F)

0.079 in (2 mm)

CMP402GSZ-REEL

Analog Devices

Comparator

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

-8 V

4 mV

4 uA

Yes

4

BICMOS

-5 V

Tape And Reel

5 V

3/5/±5 V

Small Outline

SOP16,.25

Comparators

8 V

0.05 in (1.27 mm)

125 °C (257 °F)

3 uA

60 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.39 in (9.9 mm)

KA2901DMTF

Fairchild Semiconductor

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

15 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

0 V

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

1.4 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

0.341 in (8.65 mm)

LM219D

NXP Semiconductors

Comparator

Other

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

-18 V

7 mV

1 uA

Yes

2

BIPOLAR

12.5 mA

-15 V

15 V

±15 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

500 nA

80 ns

Open-Collector

-25 °C (-13 °F)

Dual

R-PDSO-G14

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.341 in (8.65 mm)

LM239DG4

Texas Instruments

Comparator

Other

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

5 mV

400 nA

Yes

4

BIPOLAR

2 mA

Tube

5 V

5 V

Small Outline

SOP14,.24

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-25 °C (-13 °F)

Nickel Palladium Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

LM2901VDR2

Onsemi

Comparator

Automotive

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

15 mV

500 nA

Yes

4

BIPOLAR

2.5 mA

0 V

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

235 °C (455 °F)

0.341 in (8.65 mm)

LM2901VQPWRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

15 mV

-500 nA

Yes

4

BIPOLAR

AEC-Q100

2.5 mA

Tape And Reel

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

-250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

LM2903AQS-13

Diodes Incorporated

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

4 mV

500 nA

Yes

2

AEC-Q100

5 V

Small Outline

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

e3

260 °C (500 °F)

0.193 in (4.9 mm)

LM2903EDR2G

Onsemi

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

15 mV

500 nA

Yes

2

5 V

Small Outline

Comparators

36 V

0.05 in (1.27 mm)

105 °C (221 °F)

1.5 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LM2903QPWRQ1

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

0 V

7 mV

-500 nA

Yes

2

BIPOLAR

AEC-Q100

1 mA

0 V

Tape And Reel

5 V

5/30 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

50 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.173 in (4.4 mm)

LM2903WYPT

STMicroelectronics

Comparator

Automotive

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

15 mV

400 nA

Yes

2

AEC-Q100

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

0.173 in (4.4 mm)

LM319AM/NOPB

Texas Instruments

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

-18 V

10 mV

1 uA

Yes

2

BIPOLAR

12.5 mA

-15 V

Tube

15 V

±15 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

1 uA

80 ns

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

260 °C (500 °F)

0.341 in (8.65 mm)

LM393PWG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

5 mV

-400 nA

Yes

2

BIPOLAR

1 mA

Tube

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

50 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.047 in (1.2 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.173 in (4.4 mm)

LM393PWLE

Texas Instruments

Comparator

Commercial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

9 mV

-400 nA

Yes

2

BIPOLAR

2.5 mA

5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

70 °C (158 °F)

25 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Dual

R-PDSO-G8

0.047 in (1.2 mm)

0.118 in (3 mm)

No

0.173 in (4.4 mm)

LMC6772AIMM

Texas Instruments

Comparator

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

8 mV

0.4 pA

Yes

2

CMOS

20 μA

0 V

Tape And Reel

5 V

2.7/15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

16 V

0.026 in (0.65 mm)

85 °C (185 °F)

0.4 pA

4 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

260 °C (500 °F)

0.118 in (3 mm)

LMC6772QMM

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

13 mV

Yes

2

CMOS

0 V

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

16 V

0.026 in (0.65 mm)

125 °C (257 °F)

4 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.09 mm)

0.118 in (3 mm)

No

e0

40

260 °C (500 °F)

0.118 in (3 mm)

LMC6772QMMX

Texas Instruments

Comparator

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

0 V

13 mV

Yes

2

CMOS

0 V

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

16 V

0.026 in (0.65 mm)

125 °C (257 °F)

4 µs

Open-Drain

-40 °C (-40 °F)

Tin Lead

Dual

S-PDSO-G8

1

0.043 in (1.09 mm)

0.118 in (3 mm)

No

e0

40

260 °C (500 °F)

0.118 in (3 mm)

LMC7211BIM5

Texas Instruments

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

18 mV

0.4 pA

Yes

1

CMOS

12 μA

0 V

Tape And Reel

5 V

2.7/15 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

16 V

0.037 in (0.95 mm)

85 °C (185 °F)

0.4 pA

4 µs

Push-Pull

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e0

260 °C (500 °F)

0.114 in (2.9 mm)

LMC7221AIMX/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

8 mV

0.04 pA

Yes

1

CMOS

14 μA

0 V

Tape And Reel

5 V

2.7/15 V

Small Outline

SOP8,.25

Comparators

16 V

0.05 in (1.27 mm)

85 °C (185 °F)

0.4 pA

7 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.753 mm)

0.154 in (3.899 mm)

No

e3

260 °C (500 °F)

0.193 in (4.902 mm)

LMV339IPWRG4

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

4

BIPOLAR

400 μA

Tape And Reel

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

LMV393IDE4

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

2

BIPOLAR

250 μA

5 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

250 nA

600 ns

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LMV393IDT

STMicroelectronics

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

7 mV

400 nA

Yes

2

150 μA

Tape And Reel

2.7 V

3/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

400 nA

550 ns

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LMV7239QM7/NOPB

Texas Instruments

Comparator

Automotive

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

8 mV

600 nA

Yes

1

BIPOLAR

AEC-Q100

95 μA

Tape And Reel

5 V

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

125 °C (257 °F)

400 nA

75 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

260 °C (500 °F)

0.079 in (2 mm)

LMV7275MFX/NOPB

Texas Instruments

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

0 V

4 mV

100 nA

Yes

1

BICMOS

14 μA

0 V

Tape And Reel

1.8 V

1.8/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

5.5 V

0.037 in (0.95 mm)

85 °C (185 °F)

100 nA

1.8 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.048 in (1.22 mm)

0.063 in (1.6 mm)

No

e3

260 °C (500 °F)

0.115 in (2.92 mm)

LMV762MAX

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1 mV

50 pA

Yes

2

1.4 mA

5 V

2.7/5 V

Small Outline

SOP8,.25

Comparators

5.5 V

0.05 in (1.27 mm)

125 °C (257 °F)

50 pA

225 ns

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

20 s

235 °C (455 °F)

0.193 in (4.9 mm)

LP211DR

Texas Instruments

Comparator

Other

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

7.5 mV

150 nA

Yes

1

BIPOLAR

300 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

100 nA

1.2 µs

Open-Collector

-25 °C (-13 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LP2901D

Texas Instruments

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

9 mV

40 nA

Yes

4

BIPOLAR

100 μA

Tube

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

25 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

LP311DRE4

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

10 mV

150 nA

Yes

1

BIPOLAR

-15 V

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

100 nA

1.2 µs

Open-Collector, Open-Emitter

0 °C (32 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LP311DRG4

Texas Instruments

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-18 V

10 mV

150 nA

Yes

1

BIPOLAR

300 μA

-15 V

Tape And Reel

15 V

±15 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

70 °C (158 °F)

100 nA

1.2 µs

Open-Collector, Open-Emitter

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.193 in (4.9 mm)

LP339DRE4

Texas Instruments

Comparator

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

9 mV

40 nA

Yes

4

BIPOLAR

100 μA

Tape And Reel

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

70 °C (158 °F)

25 nA

1.3 µs

Open-Collector

0 °C (32 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

LT1018CS8#PBF

Analog Devices

Comparator

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-20 V

1.4 mV

100 nA

Yes

2

0 V

4.5 V

Small Outline

Comparators

40 V

0.05 in (1.27 mm)

70 °C (158 °F)

Open-Collector

0 °C (32 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

LT6700CS6-2#PBF

Analog Devices

Comparator

Commercial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

15 nA

Yes

2

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

70 °C (158 °F)

29 µs

Open-Collector

0 °C (32 °F)

Matte Tin - annealed

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LT6700HS6-2

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

50 nA

Yes

2

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G6

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

LT6700HS6-2#TR

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

50 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e0

0.114 in (2.9 mm)

LT6700HVHS6-2#TRMPBF

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

50 nA

Yes

2

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LT6703HVCS5-2#PBF

Analog Devices

Comparator

Industrial

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

10 nA

Yes

1

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G5

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LT6703HVCS5-3#PBF

Analog Devices

Comparator

Industrial

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

10 nA

Yes

1

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G5

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LT6703HVCS5-3#TRPBF

Analog Devices

Comparator

Industrial

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

10 nA

Yes

1

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LT6703HVIS5-2#TRPBF

Analog Devices

Comparator

Industrial

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

10 nA

Yes

1

Tape And Reel

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

18.5 V

0.037 in (0.95 mm)

85 °C (185 °F)

29 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LTC6702ITS8#TRMPBF

Analog Devices

Comparator

Industrial

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

5 mV

Yes

2

Tape And Reel

3 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

500 ns

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

LTC6752HSC6-4#TRPBF

Analog Devices

Comparator

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

8.5 mV

2.1 uA

Yes

1

CMOS

2.5 mA

Tape And Reel

2.5 V

Small Outline, Very Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

125 °C (257 °F)

1.25 uA

2.9 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.049 in (1.25 mm)

e3

260 °C (500 °F)

0.079 in (2 mm)

LTC6752ISC6-4#TRPBF

Analog Devices

Comparator

Industrial

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

8.5 mV

2.1 uA

Yes

1

CMOS

2.5 mA

Tape And Reel

2.5 V

Small Outline, Very Thin Profile, Shrink Pitch

TSSOP6,.08

Comparators

5.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

1.25 uA

2.9 ns

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.049 in (1.25 mm)

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

MAX9017AEKA-T

Maxim Integrated

Comparator

Industrial

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

10 mV

2 nA

Yes

2

BICMOS

2.8 μA

5 V

5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

1 nA

28 µs

Push-Pull

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e0

20 s

240 °C (464 °F)

0.114 in (2.9 mm)

MAX9017AEKA+T

Analog Devices

Comparator

Industrial

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

10 mV

2 nA

Yes

2

BICMOS

2.8 μA

5 V

5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

1 nA

28 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.