Part | RoHS | Manufacturer | Converter Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | No. of Analog In Channels | Surface Mount | Maximum Supply Voltage | Maximum Analog Input Voltage | Sample Rate | No. of Functions | Technology | Screening Level | Nominal Bandwidth | No. of Bits | Maximum Supply Current | Maximum Linearity Error (EL) | Nominal Supply Voltage | Output Bit Code | Power Supplies (V) | Nominal Negative Supply Voltage | Package Style (Meter) | Package Equivalence Code | Sub-Category | Minimum Supply Voltage | Terminal Pitch | Maximum Operating Temperature | Minimum Analog Input Voltage | Output Format | Minimum Operating Temperature | Terminal Finish | Sample and Hold/Track and Hold | Terminal Position | Maximum Conversion Time | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Additional Features | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Input Bit Code |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
28 |
SSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
2 V |
65 MHz |
1 |
CMOS |
10 |
0.1855 % |
3 V |
Offset Binary, 2's Complement Binary |
3 V |
Small Outline, Shrink Pitch |
SSOP28,.3 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
Parallel, Word |
-40 °C (-40 °F) |
Tin Lead |
Track |
Dual |
R-PDSO-G28 |
1 |
0.079 in (2 mm) |
0.209 in (5.3 mm) |
No |
e0 |
240 °C (464 °F) |
0.402 in (10.2 mm) |
||||||||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
28 |
SSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
2 V |
105 MHz |
1 |
CMOS |
10 |
0.2441 % |
3 V |
Offset Binary, 2's Complement Binary |
3 V |
Small Outline, Shrink Pitch |
SSOP28,.3 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
Parallel, Word |
-40 °C (-40 °F) |
Matte Tin |
Track |
Dual |
R-PDSO-G28 |
1 |
0.079 in (2 mm) |
0.209 in (5.3 mm) |
No |
e3 |
260 °C (500 °F) |
0.402 in (10.2 mm) |
|||||||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
28 |
TSSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
2 V |
40 MHz |
1 |
CMOS |
12 |
0.022 % |
3 V |
Offset Binary, 2's Complement Binary |
2.5,3 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP28,.25 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
500 mV |
Parallel, Word |
-40 °C (-40 °F) |
Matte Tin |
Sample |
Dual |
R-PDSO-G28 |
1 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.382 in (9.7 mm) |
|||||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
1 |
Yes |
2 V |
125 MHz |
1 |
CMOS |
14 |
0.0305 % |
1.8 V |
Offset Binary, 2's Complement Binary |
1.8,3.3 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC48,.27SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Parallel, Word |
-40 °C (-40 °F) |
Matte Tin |
Sample |
Quad |
S-XQCC-N48 |
3 |
0.039 in (1 mm) |
0.276 in (7 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
||||||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Military |
No Lead |
32 |
HVQCCN |
Square |
1 |
Yes |
2 V |
65 MHz |
1 |
CMOS |
16 |
0.00992 % |
1.8 V |
Offset Binary, 2's Complement Binary, Gray Code |
1.8 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC32,.2SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-2 V |
Serial, Parallel, Word |
-55 °C (-67 °F) |
Nickel Palladium Gold |
Sample |
Quad |
333.3 ns |
S-XQCC-N32 |
3 |
0.031 in (0.8 mm) |
0.197 in (5 mm) |
e4 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
||||||||||||
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
20 |
SSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
512 mV |
100 MHz |
1 |
CMOS |
8 |
0.8789 % |
3 V |
Offset Binary |
Small Outline, Shrink Pitch |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-512 mV |
Parallel, 8 Bits |
-40 °C (-40 °F) |
Tin Lead |
Track |
Dual |
R-PDSO-G20 |
1 |
0.079 in (2 mm) |
0.209 in (5.3 mm) |
No |
e0 |
240 °C (464 °F) |
0.283 in (7.2 mm) |
||||||||||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
44 |
TQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
2.1 V |
250 kHz |
1 |
8 |
0.3516 % |
3.3 V |
Offset Binary, 2's Complement Binary |
3.3 V |
Flatpack, Thin Profile |
TQFP44,.47SQ,32 |
Analog to Digital Converters |
0.031 in (0.8 mm) |
85 °C (185 °F) |
1.6 V |
Parallel, 8 Bits |
-40 °C (-40 °F) |
Matte Tin |
Track |
Quad |
S-PQFP-G44 |
3 |
0.047 in (1.2 mm) |
0.394 in (10 mm) |
No |
e3 |
260 °C (500 °F) |
0.394 in (10 mm) |
|||||||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
2 |
Yes |
1.58 V |
1250 MHz |
1 |
14 |
0.0366 % |
1.25 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-1.58 V |
Serial |
-40 °C (-40 °F) |
Matte Tin |
Sample |
Quad |
S-XQCC-N64 |
3 |
0.031 in (0.8 mm) |
0.354 in (9 mm) |
e3 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
|||||||||||||||||
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
128 |
HLFQFP |
Square |
Plastic/Epoxy |
2 |
Yes |
950 mV |
500 MHz |
1 |
CMOS |
8 |
0.3516 % |
1.9 V |
Offset Binary |
1.9 V |
Flatpack, Heat Sink/Slug, Low Profile, Fine Pitch |
QFP128,.87SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-950 mV |
Parallel, 8 Bits |
-40 °C (-40 °F) |
Sample |
Quad |
2 ns |
S-PQFP-G128 |
1 |
0.063 in (1.6 mm) |
0.787 in (20 mm) |
No |
0.787 in (20 mm) |
|||||||||||||||
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Ball |
144 |
Rectangular |
Plastic/Epoxy |
2 |
Yes |
825 mV |
5200 MHz |
1 |
12 |
950 μA |
0.048828125 % |
1.1 V |
Offset Binary, 2's Complement Binary |
85 °C (185 °F) |
-825 mV |
Serial |
-40 °C (-40 °F) |
Tin Lead |
Track |
Bottom |
R-PBGA-B144 |
3 |
Peak-to-peak input voltage range: 0.825 V |
e0 |
235 °C (455 °F) |
|||||||||||||||||||||||
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Ball |
144 |
Rectangular |
Plastic/Epoxy |
2 |
Yes |
825 mV |
5200 MHz |
1 |
12 |
950 μA |
0.048828125 % |
1.1 V |
Offset Binary, 2's Complement Binary |
85 °C (185 °F) |
-825 mV |
Serial |
-40 °C (-40 °F) |
Tin Lead |
Track |
Bottom |
R-PBGA-B144 |
3 |
Peak-to-peak input voltage range: 0.825 V |
e0 |
235 °C (455 °F) |
|||||||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Ball |
144 |
FBGA |
Square |
Plastic/Epoxy |
4 |
Yes |
800 mV |
1600 MHz |
1 |
12 |
0.046386 % |
1.1 V |
Offset Binary, 2's Complement Binary |
Grid Array, Fine Pitch |
BGA144,12X12,32 |
0.031 in (0.8 mm) |
85 °C (185 °F) |
-800 mV |
Serial |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
S-PBGA-B144 |
3 |
0.075 in (1.91 mm) |
0.394 in (10 mm) |
Peak-to-peak input voltage range: 0.8 V |
e1 |
30 s |
260 °C (500 °F) |
0.394 in (10 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Automotive |
Ball |
144 |
FBGA |
Square |
Plastic/Epoxy |
4 |
Yes |
800 mV |
1600 MHz |
1 |
AEC-Q100 |
12 |
100 mA |
1.1 V |
Offset Binary, 2's Complement Binary |
Grid Array, Fine Pitch |
BGA144,12X12,32 |
0.031 in (0.8 mm) |
125 °C (257 °F) |
-800 mV |
Serial |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
S-PBGA-B144 |
3 |
0.076 in (1.94 mm) |
0.394 in (10 mm) |
Peak-to-peak input voltage range: 0.8 V |
e1 |
30 s |
260 °C (500 °F) |
0.394 in (10 mm) |
||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
56 |
HVQCCN |
Square |
2 |
Yes |
1.7 V |
370 MHz |
1 |
16 |
1.2 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-1.7 V |
Serial |
-40 °C (-40 °F) |
Matte Tin |
Quad |
2.7 ns |
S-XQCC-N56 |
3 |
0.031 in (0.8 mm) |
0.315 in (8 mm) |
Peak-to-peak input voltage range: 1.7 V |
e3 |
30 s |
260 °C (500 °F) |
0.315 in (8 mm) |
|||||||||||||||||
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
1 |
Yes |
2.4 V |
130 MHz |
1 |
CMOS |
16 |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2.4 V |
Parallel, Word |
-40 °C (-40 °F) |
Tin Lead |
Sample |
Quad |
7.6 ns |
S-XQCC-N64 |
3 |
0.031 in (0.8 mm) |
0.354 in (9 mm) |
e0 |
0.354 in (9 mm) |
|||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
56 |
HVQCCN |
Square |
Plastic/Epoxy |
4 |
Yes |
2 V |
25 MHz |
1 |
14 |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Quad |
S-PQCC-N56 |
3 |
0.039 in (1 mm) |
0.315 in (8 mm) |
e4 |
30 s |
260 °C (500 °F) |
0.315 in (8 mm) |
||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
No Lead |
40 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
2.25 V |
25 MHz |
1 |
14 |
31 mA |
0.012817 % |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC40,.20SQ,16 |
0.016 in (0.4 mm) |
105 °C (221 °F) |
-2.25 V |
Serial, Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Quad |
S-PQCC-N40 |
3 |
0.031 in (0.8 mm) |
0.197 in (5 mm) |
Peak-to-peak input voltage range: 2.25 V |
e4 |
260 °C (500 °F) |
0.197 in (5 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
No Lead |
40 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
3.2 V |
125 MHz |
1 |
14 |
62 mA |
0.0457763 % |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC40,.20SQ,16 |
0.016 in (0.4 mm) |
105 °C (221 °F) |
-3.2 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Quad |
S-PQCC-N40 |
3 |
0.031 in (0.8 mm) |
0.197 in (5 mm) |
Peak-to-peak input voltage range: 3.2 V |
e4 |
260 °C (500 °F) |
0.197 in (5 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
No Lead |
40 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
3.2 V |
125 MHz |
1 |
14 |
62 mA |
0.0457763 % |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC40,.20SQ,16 |
0.016 in (0.4 mm) |
105 °C (221 °F) |
-3.2 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Quad |
S-PQCC-N40 |
3 |
0.031 in (0.8 mm) |
0.197 in (5 mm) |
Peak-to-peak input voltage range: 3.2 V |
e4 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
5.5 V |
128 Hz |
1 |
12 |
150 μA |
0.0244 % |
5 V |
2's Complement Binary |
5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
Analog to Digital Converters |
2.7 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
-200 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
R-PDSO-G6 |
1 |
0.057 in (1.45 mm) |
0.063 in (1.6 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.114 in (2.9 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
6 |
LSSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
5.5 V |
128 Hz |
1 |
12 |
150 μA |
0.0244 % |
5 V |
2's Complement Binary |
5 V |
Small Outline, Low Profile, Shrink Pitch |
TSOP6,.11,37 |
Analog to Digital Converters |
2.7 V |
0.037 in (0.95 mm) |
85 °C (185 °F) |
-200 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
R-PDSO-G6 |
1 |
0.057 in (1.45 mm) |
0.063 in (1.6 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.114 in (2.9 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
2 V |
160 MHz |
1 |
12 |
83 mA |
0.0854 % |
1.8 V |
Offset Binary, 2's Complement Binary |
1.8 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC48,.27SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold Silver |
Sample |
Quad |
S-PQCC-N48 |
3 |
0.039 in (1 mm) |
0.276 in (7 mm) |
No |
Peak-to-peak input voltage range: 2 V |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
2 |
Yes |
2 V |
250 MHz |
1 |
CMOS |
14 |
0.0104 % |
1.8 V |
Offset Binary, 2's Complement Binary |
1.8 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC64,.35SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
4 ns |
S-XQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
80 |
HTFQFP |
Square |
Plastic/Epoxy |
8 |
Yes |
2 V |
50 MHz |
1 |
CMOS |
12 |
0.0488 % |
3.3 V |
Offset Binary |
3.3 V |
Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch |
TQFP80,.55SQ |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQFP-G80 |
3 |
0.047 in (1.2 mm) |
0.472 in (12 mm) |
No |
Peak-to-peak input voltage range: 2 V |
e4 |
30 s |
260 °C (500 °F) |
0.472 in (12 mm) |
||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
80 |
HTFQFP |
Square |
Plastic/Epoxy |
8 |
Yes |
2.03 V |
65 MHz |
1 |
CMOS |
10 |
0.0977 % |
3.3 V |
Offset Binary |
3.3 V |
Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch |
TQFP80,.55SQ |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQFP-G80 |
3 |
0.047 in (1.2 mm) |
0.472 in (12 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.472 in (12 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Ball |
196 |
LFBGA |
Square |
Plastic/Epoxy |
1 |
Yes |
1 V |
500 MHz |
1 |
12 |
170 mA |
0.1221 % |
1.8 V |
Offset Binary, 2's Complement Binary |
1.8,3.3 V |
Grid Array, Low Profile, Fine Pitch |
BGA196,14X14,32 |
Analog to Digital Converters |
0.031 in (0.8 mm) |
85 °C (185 °F) |
-1 V |
Parallel, Word |
-40 °C (-40 °F) |
Tin Silver Copper |
Track |
Bottom |
S-PBGA-B196 |
3 |
0.055 in (1.4 mm) |
0.472 in (12 mm) |
No |
Peak-to-peak input voltage range: 1 V |
e1 |
30 s |
260 °C (500 °F) |
0.472 in (12 mm) |
||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
3 V |
135 MHz |
1 |
Bipolar |
16 |
0.0153 % |
3.3 V |
Offset Binary |
3.3,5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC64,.35SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Track |
Quad |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
28 |
SSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
5 V |
20 MHz |
1 |
Bipolar |
12 |
69 mA |
0.0488 % |
5 V |
Offset Binary |
5 V |
Small Outline, Shrink Pitch |
SSOP28,.3 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-5 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Track |
Dual |
100 µs |
R-PDSO-G28 |
2 |
0.079 in (2 mm) |
0.209 in (5.3 mm) |
No |
Peak-to-peak input voltage range: 2, 5 V |
e4 |
30 s |
260 °C (500 °F) |
0.402 in (10.2 mm) |
||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
28 |
SSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
3.5 V |
20 MHz |
1 |
Bipolar |
12 |
0.0488 % |
5 V |
Offset Binary |
5 V |
Small Outline, Shrink Pitch |
SSOP28,.3 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
1.5 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Track |
Dual |
100 µs |
R-PDSO-G28 |
2 |
0.079 in (2 mm) |
0.209 in (5.3 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.402 in (10.2 mm) |
||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
28 |
SSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
3 V |
53 MHz |
1 |
CMOS |
12 |
0.0977 % |
5 V |
Offset Binary |
5 V |
Small Outline, Shrink Pitch |
SSOP28,.25 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-3 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Track |
Dual |
100 µs |
R-PDSO-G28 |
2 |
0.079 in (2 mm) |
0.209 in (5.3 mm) |
No |
Peak-to-peak input voltage range: 2, 3 V |
e4 |
30 s |
260 °C (500 °F) |
0.402 in (10.2 mm) |
|||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
28 |
SSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
2 V |
40 MHz |
1 |
CMOS |
10 |
0.1953 % |
5 V |
Offset Binary |
5 V |
Small Outline, Shrink Pitch |
SSOP28,.3 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-2 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Track |
Dual |
100 µs |
R-PDSO-G28 |
2 |
0.079 in (2 mm) |
0.209 in (5.3 mm) |
No |
Peak-to-peak input voltage range: 1, 2 V |
e4 |
30 s |
260 °C (500 °F) |
0.402 in (10.2 mm) |
|||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
28 |
SSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
3.5 V |
40 MHz |
1 |
CMOS |
10 |
0.1953 % |
5 V |
Offset Binary |
5 V |
Small Outline, Shrink Pitch |
SSOP28,.3 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
1.5 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Track |
Dual |
100 µs |
R-PDSO-G28 |
2 |
0.079 in (2 mm) |
0.209 in (5.3 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.402 in (10.2 mm) |
||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
28 |
SSOP |
Rectangular |
Plastic/Epoxy |
1 |
Yes |
3.5 V |
40 MHz |
1 |
CMOS |
10 |
0.1953 % |
5 V |
Offset Binary |
5 V |
Small Outline, Shrink Pitch |
SSOP28,.3 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
1.5 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Track |
Dual |
100 µs |
R-PDSO-G28 |
2 |
0.079 in (2 mm) |
0.209 in (5.3 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.402 in (10.2 mm) |
||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Automotive |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
2 |
Yes |
5.5 V |
600 kHz |
1 |
16 |
10 mA |
0.0038 % |
5 V |
Binary, 2's Complement Binary |
3.3,5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Analog to Digital Converters |
1.65 V |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-1.2 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Dual |
730 ns |
R-PDSO-G16 |
2 |
0.047 in (1.2 mm) |
0.173 in (4.4 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Automotive |
No Lead |
16 |
HVQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
5.5 V |
600 kHz |
1 |
16 |
10 mA |
0.0038 % |
5 V |
Binary, 2's Complement Binary |
3.3,5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.12SQ,20 |
Analog to Digital Converters |
1.65 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-1.2 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
730 ns |
S-PQCC-N16 |
2 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
2 V |
450 MHz |
1 |
CMOS |
8 |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Serial, Parallel, 8 Bits |
-40 °C (-40 °F) |
Matte Tin |
Track |
Quad |
2.2 µs |
S-PQCC-N48 |
2A |
0.039 in (1 mm) |
0.276 in (7 mm) |
e3 |
0.276 in (7 mm) |
|||||||||||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Commercial |
Gull Wing |
10 |
TSSOP |
Square |
Plastic/Epoxy |
1 |
Yes |
1.25 V |
2.8 MHz |
1 |
CMOS |
12 |
0.0488 % |
3 V |
Binary, 2's Complement Binary |
Small Outline, Thin Profile, Shrink Pitch |
0.02 in (0.5 mm) |
70 °C (158 °F) |
-1.25 V |
Serial |
0 °C (32 °F) |
Matte Tin |
Sample |
Dual |
357 µs |
S-PDSO-G10 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Commercial |
Gull Wing |
10 |
HTSSOP |
Square |
Plastic/Epoxy |
2 |
Yes |
2.5 V |
3 MHz |
1 |
14 |
0.0244 % |
3 V |
Binary |
Small Outline |
0.02 in (0.5 mm) |
70 °C (158 °F) |
0 mV |
Serial |
0 °C (32 °F) |
Matte Tin |
Sample |
Dual |
S-PDSO-G10 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
10 |
HTSSOP |
Square |
Plastic/Epoxy |
2 |
Yes |
1.25 V |
3 MHz |
1 |
CMOS |
12 |
0.0488 % |
3 V |
2's Complement Binary |
Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-1.25 V |
Serial |
-40 °C (-40 °F) |
Matte Tin |
Sample |
Dual |
660 ns |
S-PDSO-G10 |
1 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||||
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Commercial |
No Lead |
32 |
HVQCCN |
Square |
Plastic/Epoxy |
6 |
Yes |
2.5 V |
600 kHz |
1 |
14 |
0.0183 % |
3 V |
Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
70 °C (158 °F) |
0 mV |
Serial |
0 °C (32 °F) |
Tin Lead |
Sample |
Quad |
S-PQCC-N32 |
1 |
0.031 in (0.8 mm) |
0.197 in (5 mm) |
No |
e0 |
0.197 in (5 mm) |
||||||||||||||||||
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
16 |
SSOP |
Rectangular |
Plastic/Epoxy |
8 |
Yes |
1.25 V |
175 kHz |
1 |
12 |
0.0244 % |
2.7 V |
Binary, 2's Complement Binary |
Small Outline, Shrink Pitch |
0.025 in (0.635 mm) |
85 °C (185 °F) |
-1.25 V |
Serial |
-40 °C (-40 °F) |
Tin/Lead |
Dual |
3.7 µs |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.899 mm) |
No |
e0 |
0.193 in (4.89 mm) |
||||||||||||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Commercial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
2.4 V |
210 MHz |
1 |
CMOS |
16 |
0.0069 % |
2.5 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
70 °C (158 °F) |
-2.4 V |
Serial, Parallel, Word |
0 °C (32 °F) |
Matte Tin |
Sample |
Quad |
S-PQCC-N48 |
0.031 in (0.8 mm) |
0.276 in (7 mm) |
e3 |
0.276 in (7 mm) |
||||||||||||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
2 V |
125 MHz |
1 |
CMOS |
14 |
0.0159 % |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Parallel, Word |
-40 °C (-40 °F) |
Matte Tin - annealed |
Sample |
Quad |
S-PQCC-N64 |
1 |
0.031 in (0.8 mm) |
0.354 in (9 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
||||||||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Commercial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
1.5 V |
250 MHz |
1 |
CMOS |
12 |
0.0562 % |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
70 °C (158 °F) |
-1.5 V |
Parallel, Word |
0 °C (32 °F) |
Matte Tin |
Sample |
Quad |
S-PQCC-N64 |
1 |
0.031 in (0.8 mm) |
0.354 in (9 mm) |
e3 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
|||||||||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
2 V |
25 MHz |
1 |
CMOS |
16 |
0.0092 % |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Parallel, Word |
-40 °C (-40 °F) |
Matte Tin - annealed |
Sample |
Quad |
S-PQCC-N48 |
0.031 in (0.8 mm) |
0.276 in (7 mm) |
No |
e3 |
0.276 in (7 mm) |
|||||||||||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Commercial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
1.25 V |
125 MHz |
1 |
CMOS |
16 |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
70 °C (158 °F) |
700 mV |
Parallel, Word |
0 °C (32 °F) |
Matte Tin - annealed |
Sample |
Quad |
S-PQCC-N48 |
0.031 in (0.8 mm) |
0.276 in (7 mm) |
No |
e3 |
0.276 in (7 mm) |
||||||||||||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Commercial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
1.25 V |
125 MHz |
1 |
CMOS |
16 |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
70 °C (158 °F) |
700 mV |
Parallel, Word |
0 °C (32 °F) |
Matte Tin - annealed |
Sample |
Quad |
S-PQCC-N48 |
0.031 in (0.8 mm) |
0.276 in (7 mm) |
No |
e3 |
0.276 in (7 mm) |
||||||||||||||||||
|
Analog Devices |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
52 |
HVQCCN |
Rectangular |
Plastic/Epoxy |
4 |
Yes |
2 V |
40 MHz |
1 |
CMOS |
12 |
0.0244 % |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Serial |
-40 °C (-40 °F) |
Matte Tin - annealed |
Sample |
Quad |
R-PQCC-N52 |
1 |
0.031 in (0.8 mm) |
0.276 in (7 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.315 in (8 mm) |
Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.
ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.
ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.
ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.
Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.