LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN65LVDS1DBVR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		TTL		3.1 ns	EIA-644-A; TIA-644-A	7 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	2.4 V	Line Driver or Receivers	.00002 Amp	2.4 V	.95 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	1	1.45 mm	1.6 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	2.9 mm	.2 V	3.6 ns
DS26LV31TMX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4		CMOS		16 ns	EIA-422-B; TIA-422-B; V.11	.1 mA	STANDARD	3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp		1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Matte Tin (Sn)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		TRUE			YES	e3	NOT SPECIFIED	260	9.9 mm	2 V	0 ns
ISL3295EFHZ-T7A	Renesas Electronics	LINE DRIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		1500 ns	EIA-485; EIA-422		STANDARD	3.3 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3 V	.95 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G6	2	1.45 mm	1.6 mm						YES	e3	30	260	2.9 mm
ISL3295EFHZ-T	Renesas Electronics	LINE DRIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		1500 ns	EIA-485; EIA-422		STANDARD	3.3 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3 V	.95 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G6	2	1.45 mm	1.6 mm						YES	e3	30	260	2.9 mm
SN65LVDS1DBVT	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		TTL		3.1 ns	EIA-644-A; TIA-644-A	8 mA	STANDARD	3.3 V	3.6 V	2.5/3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	2.4 V	Line Driver or Receivers	.00002 Amp	2.4 V	.95 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	1	1.45 mm	1.6 mm	Not Qualified	8 Amp	TRUE	1		YES	e4	NOT SPECIFIED	260	2.9 mm	.2 V	3.6 ns
ISL3295EIHZ-T7A	Renesas Electronics	LINE DRIVER	INDUSTRIAL	GULL WING	6	HLSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		42 ns	EIA-485; EIA-422		STANDARD	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH					3 V	.95 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G6	2	1.45 mm	1.6 mm						YES	e3	30	260	2.9 mm
DRV135UA	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	36 V	1	1				GENERAL PURPOSE		STANDARD	18 V	18 V	+-18	-18 V	SMALL OUTLINE	SOP8,.4	4.5 V	Line Driver or Receivers	.001 Amp	9 V	1.27 mm	125 Cel	18 V		-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	3	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	4.9 mm	20 V	0 ns
ISL3295EIHZ-T	Renesas Electronics	LINE DRIVER	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		1500 ns	EIA-485; EIA-422		STANDARD	3.3 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3 V	.95 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G6	2	1.45 mm	1.6 mm						YES	e3	30	260	2.9 mm
SN75LVDS83BDGGR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE	115 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	14 mm		0 ns
SN65LVDS93ADGGR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					GENERAL PURPOSE	116 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	14 mm		0 ns
SN65LVDS93ADGG	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					GENERAL PURPOSE	116 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	14 mm	.25 V	0 ns
DRV135UA/2K5	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	36 V	1	1				GENERAL PURPOSE		STANDARD	18 V	18 V	+-18	-18 V	SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.001 Amp	9 V	1.27 mm	125 Cel	18 V		-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	3	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	4.9 mm	20 V	0 ns
MAX3295AUT+T	Analog Devices	LINE DRIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1		BICMOS		25 ns	EIA-422; EIA-485		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		Line Driver or Receivers		3.135 V	.95 mm	125 Cel		3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm	Not Qualified					YES	e4	30	260	2.9 mm	1.5 V	0 ns
MAX3295AUT-T	Analog Devices	LINE DRIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1		BICMOS		25 ns	EIA-422; EIA-485		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		Line Driver or Receivers		3.135 V	.95 mm	125 Cel		3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm	Not Qualified					YES	e4	30	240	2.9 mm	1.5 V	0 ns
AM26C31CD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	20 Amp	COMPLEMENTARY			YES	e4	30	260	9.9 mm	2 V	0 ns
SN65LVDS1DBVRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		TTL		3.1 ns	EIA-644-A; TIA-644-A	8 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	2.4 V	Line Driver or Receivers	.00002 Amp	2.4 V	.95 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	1	1.45 mm	1.6 mm	Not Qualified	.02 Amp	TRUE	1		YES	e4	NOT SPECIFIED	260	2.9 mm	.247 V	3.6 ns
DS26LV31TM/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4		CMOS		16 ns	EIA-422-B; TIA-422-B; V.11	.1 mA	STANDARD	3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp		1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Matte Tin (Sn)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		TRUE			YES	e3	NOT SPECIFIED	260	9.9 mm	2 V	0 ns
DRV135UA/2K5E4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	36 V	1	1				GENERAL PURPOSE		STANDARD	18 V	18 V	+-18	-18 V	SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.001 Amp	9 V	1.27 mm	125 Cel	18 V		-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	3	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	4.9 mm	20 V	0 ns
SN65LVDS1DBVTG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		TTL		3.1 ns	EIA-644-A; TIA-644-A	8 mA	STANDARD	3.3 V	3.6 V	2.5/3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	2.4 V	Line Driver or Receivers	.00002 Amp	2.4 V	.95 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G5	1	1.45 mm	1.6 mm	Not Qualified	.02 Amp	TRUE	1		YES	e4	NOT SPECIFIED	260	2.9 mm	.2 V	3.6 ns
DS90LV047ATMTCX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified		TRUE			YES	e3	30	260	5 mm	.25 V	0 ns
MAX256ASA-T	Maxim Integrated	LINE DRIVER	AUTOMOTIVE	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS					STANDARD	5 V		3.3/5		SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Other Interface ICs		3 V	1.27 mm	125 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.68 mm	3.9 mm	Not Qualified					NO	e0			4.89 mm		0 ns
MAX256ASA+T	Analog Devices	LINE DRIVER	AUTOMOTIVE	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS					STANDARD	5 V		3.3/5		SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Other Interface ICs		3 V	1.27 mm	125 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.68 mm	3.9 mm	Not Qualified					NO	e3	30	260	4.89 mm		0 ns
DS26C31TM/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		11 ns	EIA-422	2 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		TRUE			YES	e3	30	260	9.9 mm		0 ns
AM26LV31EIDR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				12 ns	EIA-422-B; TIA-422-B; V.11	.1 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	30 Amp	TRUE		BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	9.9 mm	2 V	0 ns
DRV135UAG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	36 V	1	1				GENERAL PURPOSE		STANDARD	18 V	18 V	+-18	-18 V	SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.001 Amp	9 V	1.27 mm	125 Cel	18 V		-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	3	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	4.9 mm	20 V	0 ns
AM26LV31EIRGYR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				12 ns	EIA-422-B; TIA-422-B; V.11	.1 mA	STANDARD	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16/20,.14X.16,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N16	2	1 mm	3.5 mm	Not Qualified	30 Amp	TRUE		BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	4 mm	2 V	0 ns
AM26LS31CDR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	80 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	20 Amp	COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	9.9 mm	2 V	0 ns
AM26LS31CN	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	80 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	20 Amp	COMPLEMENTARY			YES	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	2 V	0 ns
DS26C31TMX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		11 ns	EIA-422	2 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		TRUE			YES	e3	30	260	9.9 mm		0 ns
SN65LVDS1DBV	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		TTL		3.1 ns	EIA-644-A; TIA-644-A		STANDARD	3.3 V		2.5/3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		Line Driver or Receivers	.00002 Amp	2.4 V	.95 mm	85 Cel		TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	1	1.45 mm	1.6 mm	Not Qualified					YES	e4	30	260	2.9 mm	.247 V	3.6 ns
FIN1001M5X	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		Line Driver or Receivers	.00002 Amp	3 V	.95 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G5	1	1.4 mm	1.6 mm	Not Qualified					YES	e3	30	260	2.9 mm	.25 V
DS90LV011ATMFX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		1.5 ns	EIA-644-A; TIA-644-A			3.3 V	3.6 V	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	3 V	Line Driver or Receivers	.00001 Amp	3 V	.95 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	Matte Tin (Sn)	DUAL	R-PDSO-G5	1	1.22 mm	1.6 mm	Not Qualified		TRUE			YES	e3	NOT SPECIFIED	260	2.92 mm	.25 V	0 ns
AM26LV31EIRGYRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				12 ns	EIA-422-B; TIA-422-B; V.11	.1 mA	STANDARD	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16/20,.14X.16,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N16	2	1 mm	3.5 mm	Not Qualified	30 Amp	TRUE		BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	4 mm	2 V	0 ns
AD8138ARZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE	SOP8,.25				1.4 V	1.27 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e3	40	260	4.9 mm		0 ns
AD8138ARMZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					1.4 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified					YES	e3	30	260	3 mm		0 ns
AM26LS31CDRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	80 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	20 Amp				YES	e4	NOT SPECIFIED	260	9.9 mm	2 V	0 ns
DRV134UA/1K	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	36 V	1	1				GENERAL PURPOSE		STANDARD	18 V	18 V	+-18	-18 V	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.001 Amp	9 V	1.27 mm		18 V			1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	3	2.65 mm	7.5 mm	Not Qualified	1 Amp	COMPLEMENTARY			YES	e4	30	260	10.3 mm	20 V	0 ns
DS90LV047ATMTC/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified		TRUE			YES	e3	30	260	5 mm	.25 V	0 ns
DS90UB947TRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			469 mA			1.89 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm	1.197 V
DS25BR120TSD/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	UNSPECIFIED	YES	3.6 V	1				.465 ns	GENERAL PURPOSE	43 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.11,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-XDSO-N8	3	.8 mm	3 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	3 mm		0 ns
DS90LV011ATMF/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		1.5 ns	EIA-644-A; TIA-644-A			3.3 V	3.6 V	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	3 V	Line Driver or Receivers	.00001 Amp	3 V	.95 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	Matte Tin (Sn)	DUAL	R-PDSO-G5	1	1.22 mm	1.6 mm	Not Qualified		TRUE			YES	e3	NOT SPECIFIED	260	2.92 mm	.25 V	0 ns
HI-8585PSI-N	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	GULL WING	8	LSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	1		CMOS			ARINC 429		DIFFERENTIAL	15 V			-15 V	SMALL OUTLINE, LOW PROFILE					11.4 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.626 mm	3.9 mm	Not Qualified					YES	e0			4.92 mm
DS90C385AMTX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	55 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	4	MATTE TIN	DUAL	R-PDSO-G56	2	1.1 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	14 mm		0 ns
HI-8585PSIF	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	GULL WING	8	LSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	1		CMOS			ARINC 429		STANDARD	15 V		+-12/+-15	-15 V	SMALL OUTLINE, LOW PROFILE	SOP8,.25		Line Driver or Receivers		11.4 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn)	DUAL	R-PDSO-G8	1	1.626 mm	3.9 mm	Not Qualified					NO	e3	40	260	4.92 mm	9 V	0 ns
DRV134UA	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	36 V	1	1				GENERAL PURPOSE		STANDARD	18 V	18 V	+-18	-18 V	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.001 Amp	9 V	1.27 mm		18 V			1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	3	2.65 mm	7.5 mm	Not Qualified	1 Amp	COMPLEMENTARY			YES	e4	30	260	10.3 mm	20 V	0 ns
ADA4927-1YCPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	105 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	1 mm	3 mm	Not Qualified					YES	e3		260	3 mm		0 ns
DS2480B/T&R	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1					EIA-232-C		STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified					NO	e0			4.9 mm		0 ns
DS2480B+T&R	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1					EIA-232-C		STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					NO	e3	30	260	4.9 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.