LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN65HVS880PWPR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	34 V	1				10 ns	GENERAL PURPOSE	8.7 mA	STANDARD	24 V	30 V	24		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	18 V	Line Driver or Receivers		18 V	.65 mm	85 Cel	24 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	2	1.2 mm		4.4 mm	Not Qualified		TRUE			NO	e4	NOT SPECIFIED	260	9.7 mm	4 V	0 ns
AM26LV31CDR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	.1 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel	3.3 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	9.9 mm	.95 V	0 ns
FIN3385MTDX	Onsemi	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					EIA-644; TIA-644	66 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.1 mm		6.1 mm	Not Qualified					YES	e4	30	260	14 mm
AM26C31CDBR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified	20 Amp	COMPLEMENTARY			YES	e4	30	260	6.2 mm	2 V	0 ns
DS90LV011AQMFX/NOPB	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100	1.5 ns	EIA-644-A; TIA-644-A	10 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	3 V	Line Driver or Receivers	.00001 Amp	3 V	.953 mm	125 Cel	3.3 V	3-STATE	-40 Cel	1	Matte Tin (Sn)	DUAL	R-PDSO-G5	1	1.45 mm		1.6 mm	Not Qualified		COMPLEMENTARY			YES	e3	NOT SPECIFIED	260	2.9 mm	.25 V	0 ns
MAX256ASA	Maxim Integrated	LINE DRIVER	AUTOMOTIVE	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS					STANDARD	5 V		3.3/5		SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Other Interface ICs		3 V	1.27 mm	125 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.68 mm		3.9 mm	Not Qualified					NO	e0			4.89 mm		0 ns
MAX256ASA+	Analog Devices	LINE DRIVER	AUTOMOTIVE	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS					STANDARD	5 V		3.3/5		SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Other Interface ICs		3 V	1.27 mm	125 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.68 mm		3.9 mm	Not Qualified					NO	e3	30	260	4.89 mm		0 ns
DS90LV011AQMF/NOPB	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100	1.5 ns	EIA-644-A; TIA-644-A	10 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	3 V	Line Driver or Receivers	.00001 Amp	3 V	.953 mm	125 Cel	3.3 V	3-STATE	-40 Cel	1	Matte Tin (Sn)	DUAL	R-PDSO-G5	1	1.45 mm		1.6 mm	Not Qualified		COMPLEMENTARY			YES	e3	NOT SPECIFIED	260	2.9 mm	.25 V	0 ns
DS90LV031ATMTCX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2 ns	EIA-644; TIA-644; IEEE 1596.3		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified	.01 Amp	TRUE			YES	e3	30	260	5 mm	.25 V	0 ns
DS90UB948TNKDRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2		NO	e3	30	260	9 mm
AM26LS31CDBRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	80 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	.65 mm	70 Cel	5 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified	20 Amp				YES	e4	NOT SPECIFIED	260	6.2 mm	2 V	0 ns
DS90LV031ATMTC/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2 ns	EIA-644; TIA-644; IEEE 1596.3		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified	.01 Amp	TRUE			YES	e3	30	260	5 mm	.25 V	0 ns
DS25BR120TSDX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	UNSPECIFIED	YES	3.6 V	1				.465 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.11,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-XDSO-N8	3	.8 mm		3 mm	Not Qualified					YES	e3	30	260	3 mm		0 ns
HI-8586PSIF	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	GULL WING	8	LSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	1		CMOS			ARINC 429		STANDARD	15 V		+-12/+-15	-15 V	SMALL OUTLINE, LOW PROFILE	SOP8,.25		Line Driver or Receivers		11.4 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn)	DUAL	R-PDSO-G8	1	1.626 mm		3.9 mm	Not Qualified					NO	e3	40	260	4.92 mm	9 V	0 ns
DS26LV31TM	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		16 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.753 mm		3.9 mm	Not Qualified					YES	e0	20	235	9.9 mm	2 V	0 ns
DS90LV047ATM/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		TRUE			YES	e3	30	260	9.9 mm	.25 V	0 ns
HI-8586PSI	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	GULL WING	8	LSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	1		CMOS			ARINC 429		STANDARD	15 V		+-12/+-15	-15 V	SMALL OUTLINE, LOW PROFILE	SOP8,.25		Line Driver or Receivers		11.4 V	1.27 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.626 mm		3.9 mm	Not Qualified				CAN ALSO OPERATE WITH A +/-15V SUPPLY	NO	e0	30	240	4.92 mm	9 V	0 ns
LMH0302SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1		BIPOLAR			GENERAL PURPOSE	59 mA	DIFFERENTIAL	3.3 V	3.46 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.13 V	Line Driver or Receivers		3.135 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	3	.8 mm		4 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4 mm	.72 V	0 ns
DS90LV031ATMX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2 ns	EIA-644; TIA-644; IEEE 1596.3		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		TRUE			YES	e0	20	235	9.9 mm	.25 V	0 ns
SN65LBC174A16DWRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm		7.5 mm	Not Qualified					YES	e4	30	260	10.3 mm	1 V	0 ns
SN75ALS194D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		14 ns	V.11; EIA-422-B	45 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	48 Amp	COMPLEMENTARY			YES	e4	30	260	9.9 mm	2 V	0 ns
SN65LVDS9638D	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	4.9 mm	.247 V	0 ns
AM26LS31CDBRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	.65 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	6.2 mm	2 V	0 ns
DS90LV027ATMX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e3	30	260	4.9 mm	.25 V	0 ns
DS90UR908QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE	95 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	3.6 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm		7 mm	Not Qualified		TRUE			YES	e3	30	260	7 mm		0 ns
AM26LV31CDRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	.1 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel	3.3 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	9.9 mm	.95 V	0 ns
ADA4960-1ACPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1					GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm		3 mm	Not Qualified					YES	e3	30	260	3 mm		0 ns
HI-8593PSMF	Holt Integrated Circuits	LINE DRIVER	MILITARY	GULL WING	8	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1					ARINC 429		STANDARD	5 V		-5	-5 V	SMALL OUTLINE, HEAT SINK/SLUG	SOP8,.25		Line Driver or Receivers	.0000001 Amp	4.85 V	1.27 mm	125 Cel		3-STATE	-55 Cel	2	Matte Tin (Sn)	DUAL	R-PDSO-G8	1	2.202 mm		3.9 mm	Not Qualified					YES	e3	40	260	4.92 mm	9 V	0 ns
DS26C31TM	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		11 ns	EIA-422		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified					YES	e0	20	235	9.9 mm		0 ns
SN75ALS194DRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		14 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified					YES	e4	30	260	9.9 mm	2 V	0 ns
DS26LS31CMX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		15 ns	EIA-422; FED STD 1020	60 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	Matte Tin (Sn)	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		TRUE			YES	e3	NOT SPECIFIED	260	9.9 mm	2 V	0 ns
HI-8585PST	Holt Integrated Circuits	LINE DRIVER	MILITARY	GULL WING	8	LSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	1		CMOS			ARINC 429		STANDARD	15 V		+-12/+-15	-15 V	SMALL OUTLINE, LOW PROFILE	SOP8,.25		Line Driver or Receivers		11.4 V	1.27 mm	125 Cel			-55 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.626 mm		3.9 mm	Not Qualified				CAN ALSO OPERATE WITH A +/-15V SUPPLY	NO	e0		260	4.92 mm	9 V	0 ns
HI-8596PSTF	Holt Integrated Circuits	LINE DRIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.45 V	1		CMOS			ARINC 429		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.0000001 Amp	3.15 V	1.27 mm	125 Cel		3-STATE	-55 Cel	1	Matte Tin (Sn)	DUAL	R-PDSO-G16	1	1.727 mm		3.87 mm	Not Qualified					YES	e3	40	260	9.9 mm	9 V	0 ns
DS90UB941ASRTDRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	4			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	1.1 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.045 V	.5 mm	105 Cel	1.8 V		-40 Cel	4	NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N64	3	.9 mm		9 mm					ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.71 TO 1.89 V	YES	e4	30	260	9 mm
SN65LVDS31PWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified		TRUE			YES	e4	NOT SPECIFIED	260	5 mm	.247 V	0 ns
SN75174N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		65 ns	EIA-422-B; TIA-422-B; EIA-485; V.11	60 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES	e4			19.305 mm	1.5 V	0 ns
DS34C87TMX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		11 ns	EIA-422	.5 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		TRUE			YES	e3	30	260	9.9 mm		0 ns
SN75ALS194DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		14 ns	V.11; EIA-422-B	45 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	48 Amp	COMPLEMENTARY			YES	e4	30	260	9.9 mm	2 V	0 ns
THS6012CDWP	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	33 V	2	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V	16 V		-5 V	SMALL OUTLINE, HEAT SINK/SLUG		4.5 V			9 V	1.27 mm	70 Cel	15 V		0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	2	2.65 mm	.5 A	7.52 mm	Not Qualified				9V TO 32V SINGLE SUPPLY OPERATION ALSO POSSIBLE	NO	e4	30	260	12.825 mm		0 ns
SN75ALS194DRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		14 ns	V.11; EIA-422-B		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9.9 mm	2 V	0 ns
SN65LBC172A16DWRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm		7.5 mm	Not Qualified					YES	e4	30	260	10.3 mm	1 V	0 ns
AM26C31IPW	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified	20 Amp				YES	e4	30	260	5 mm	2 V	0 ns
DS90UB949TRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			330 mA			1.89 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm	1.197 V
SN65LBC172A16DWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm		7.5 mm	Not Qualified					YES	e4	30	260	10.3 mm	1 V	0 ns
DS90UH949TRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	2			AEC-Q100		I2C	330 mA	DIFFERENTIAL	1.1 V	1.155 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.045 V	Line Driver or Receivers		1.045 V	.5 mm	105 Cel	1.1 V	DIFFERENTIAL	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY		ALSO REQ 1.71 TO 1.89V AND 3.135 TO 3.465V	YES	e4	30	260	9 mm
FIN1027AMX	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e4	30	260	4.9 mm	.25 V
SN65LVDS31D	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		TRUE			YES	e4	NOT SPECIFIED	260	9.9 mm	.247 V	0 ns
DS90UB947TRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			469 mA			1.89 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm	1.197 V

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.