LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
AM26LV31IDRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-45 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified				BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	9.9 mm	.95 V	0 ns
DS90CR287MTDX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		1.5 ns	EIA-644; TIA-644	60 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		-10 Cel	4	MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified					YES	e3	30	260	14 mm	2.7 V	0 ns
MAX3032EEUE-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS		16 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e0			5 mm	2 V	0 ns
MAX3032EEUE+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS		16 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e3	30	260	5 mm	2 V	0 ns
SN75113N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		30 ns	GENERAL PURPOSE	65 mA	GATED	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel	5 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	.04 Amp	COMPLEMENTARY		1 SINGLE INPUT DRIVER	YES	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	1.6 V	0 ns
SN75LVDS83ADGG	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			GENERAL PURPOSE	96.8 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	TSSOP56,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	14 mm		0 ns
SN75LVDS83CZQLR	Texas Instruments	LINE DRIVER	COMMERCIAL	BALL	56	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE		STANDARD	3.3 V	3.6 V	3.3		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA56,6X10,25	3 V	Line Driver or Receivers	.000025 Amp	2.8 V	.65 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	4	TIN SILVER COPPER	BOTTOM	R-PBGA-B56	2	1 mm	4.5 mm	Not Qualified		COMPLEMENTARY			YES	e1	30	260	7 mm		0 ns
AD815ARB-24	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	24	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	1		BIPOLAR			GENERAL PURPOSE	55 mA	DIFFERENTIAL	15 V			-15 V	SMALL OUTLINE, HEAT SINK/SLUG					5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G24	5	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY			YES	e0		225	15.4 mm		0 ns
AD815ARB-24-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	24	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	1		BIPOLAR			GENERAL PURPOSE	55 mA	DIFFERENTIAL	15 V			-15 V	SMALL OUTLINE, HEAT SINK/SLUG					5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G24	5	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY			YES	e0		225	15.4 mm		0 ns
ADA4932-1YCPZ	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	VQCCN	SQUARE	UNSPECIFIED	YES	11 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	1		QUAD	S-XQCC-N16		1 mm	3 mm						YES		30	260	3 mm
DRV134PAG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	36 V	1	1				GENERAL PURPOSE		STANDARD	18 V	18 V	+-18	-18 V	IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.001 Amp	9 V	2.54 mm	125 Cel	18 V		-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	1 Amp	COMPLEMENTARY			YES	e4			9.81 mm	20 V	0 ns
DS26LS31MJ/883	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4		BIPOLAR	MIL-STD-883	15 ns	EIA-422; FED STD 1020	60 mA	STANDARD	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	2.54 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	DUAL	R-GDIP-T16	1	5.08 mm	7.62 mm	Not Qualified				LG_MAX; SEATED HGT-NOM	YES	e0			19.43 mm	2 V	0 ns
HI-8596PSMF	Holt Integrated Circuits	LINE DRIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.45 V	1		CMOS			ARINC 429		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.0000001 Amp	3.15 V	1.27 mm	125 Cel		3-STATE	-55 Cel	1	Matte Tin (Sn)	DUAL	R-PDSO-G16	1	1.727 mm	3.87 mm	Not Qualified					YES	e3	40	260	9.9 mm	9 V	0 ns
SN65LVDS31PWG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified		TRUE			YES	e4	NOT SPECIFIED	260	5 mm	.247 V	0 ns
SN65LVDS391PW	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.9 ns	EIA-644; TIA-644	26 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified		TRUE			YES	e4	30	260	5 mm	.247 V	0 ns
FIN1047MX	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm	.25 V
MAX3293AUT-T	Maxim Integrated	LINE DRIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1		BICMOS		1300 ns	EIA-422; EIA-485		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		Line Driver or Receivers		3.135 V	.95 mm	125 Cel		3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm	Not Qualified					YES	e4	30	240	2.9 mm	1.5 V	0 ns
MAX3293AUT+T	Analog Devices	LINE DRIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1		BICMOS		1300 ns	EIA-422; EIA-485		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		Line Driver or Receivers		3.135 V	.95 mm	125 Cel		3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm	Not Qualified					YES	e4	30	260	2.9 mm	1.5 V	0 ns
DRV1101U/2K5	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	4.9 mm	8.5 V	0 ns
DS25BR100TSD/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.6 V	1				.465 ns	GENERAL PURPOSE	43 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-XDSO-N8	3	.8 mm	3 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	3 mm		0 ns
DS25BR100TSDX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.6 V	1				.465 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-XDSO-N8	3	.8 mm	3 mm	Not Qualified					YES	e3	30	260	3 mm		0 ns
DS3691MX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		300 ns	EIA-423; EIA-442		STANDARD	5 V		5/+-5	-5 V	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified				CAN ALSO BE USED AS SINGLE ENDED DRIVER; CONFIGURABLE INTERFACE STANDARDS	YES	e3	30	260	9.9 mm	2 V	0 ns
DS90C363BMTX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	55 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	3	TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified					YES	e0	20	235	12.5 mm		0 ns
DS90C385AMT	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	70 Cel			-10 Cel	4	TIN LEAD	DUAL	R-PDSO-G56	2	1.1 mm	6.1 mm	Not Qualified					YES	e0	20	235	14 mm
DS90UR241QVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			105 mA		3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7 mm	2 V	0 ns
HI-8570PDMF	Holt Integrated Circuits	LINE DRIVER	MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.3 V	2		CMOS			ARINC 429		STANDARD	5 V		+-5	-5 V	IN-LINE	DIP8,.3		Line Driver or Receivers	.0000001 Amp	4.8 V	2.54 mm	125 Cel			-55 Cel	1	MATTE TIN	DUAL	R-PDIP-T8		4.699 mm	6.35 mm	Not Qualified					YES	e3			4.699 mm	9 V	0 ns
HI-8570PSMF	Holt Integrated Circuits	LINE DRIVER	MILITARY	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.3 V	2		CMOS			ARINC 429		STANDARD	5 V		+-5	-5 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers	.0000001 Amp	4.8 V	1.27 mm	125 Cel			-55 Cel	1	Matte Tin (Sn)	DUAL	R-PDSO-G8		1.626 mm	3.9 mm	Not Qualified					YES	e3	40	260	4.915 mm	9 V	0 ns
SN75150D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	2		BIPOLAR		.2 ns	EIA-232-E; V.28		STANDARD	12 V	13.2 V	+-12	-12 V	SMALL OUTLINE	SOP8,.25	10.8 V	Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e4	NOT SPECIFIED	260	4.9 mm	10 V	0 ns
SN75ALS194N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		14 ns	V.11; EIA-422-B	45 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	48 Amp	COMPLEMENTARY			YES	e4			19.305 mm	2 V	0 ns
AM26LV31IDRE4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-45 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified				BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	9.9 mm	.95 V	0 ns
DRV1100UG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	2	1.75 mm	3.9 mm	Not Qualified					YES	e4	30	260	4.9 mm		0 ns
DRV1101UG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS		25 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	2	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	4.9 mm	8.5 V	0 ns
HI-8382C	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.25 V	1		CMOS		3000 ns	ARINC 429		DIFFERENTIAL	5 V	15 V	5,+-12/+-15		IN-LINE	DIP16,.3	12 V	Line Driver or Receivers	.000001 Amp	4.75 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	1	GOLD	DUAL	R-CDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY		LEAD FINISH-GOLD	YES	e4			20.57 mm	9.5 V	0 ns
HI-8382CM	Holt Integrated Circuits	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	33 V	1		CMOS		3000 ns	ARINC 429	11 mA	DIFFERENTIAL	30 V		5,+-12/+-15		IN-LINE	DIP16,.3		Line Driver or Receivers	.000001 Amp	21.6 V	2.54 mm	125 Cel		TOTEM-POLE	-55 Cel	1	TIN LEAD	DUAL	R-CDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES	e0			19.05 mm	9.5 V	0 ns
HI-8596PCI	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.45 V	1		CMOS			ARINC 429		STANDARD	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers	.0000001 Amp	3.15 V	.65 mm	85 Cel		3-STATE	-40 Cel	1	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-N16	3	1 mm	4 mm	Not Qualified					YES	e0	NOT SPECIFIED	NOT SPECIFIED	4 mm	9 V	0 ns
MAX9112EKA-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel			-40 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.45 mm	1.625 mm	Not Qualified					YES	e0	20	240	2.9 mm	.25 V	0 ns
MAX9112EKA+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel			-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.45 mm	1.625 mm	Not Qualified					YES	e3	30	260	2.9 mm	.25 V	0 ns
SN75172DW	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		65 ns	V.11; EIA-422-B; EIA-485	60 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	.36 Amp	COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
SN75172DWG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		65 ns	V.11; EIA-422-B; EIA-485	60 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
ADA4932-2YCPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	2		BIPOLAR			GENERAL PURPOSE	5 mA	DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20				3 V	.5 mm	105 Cel		DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	.8 mm	4 mm	Not Qualified		COMPLEMENTARY			YES	e3	40	260	4 mm	3.2 V
AM26LS31CNS	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm
DRV1100P	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel			-40 Cel	1		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	9.81 mm		0 ns
DS90LV017ATM	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				1.5 ns	EIA-644	10 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e0	20	235	4.9 mm	.25 V	0 ns
DS90UH947TRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		2			AEC-Q100			469 mA			1.155 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.045 V	Line Driver or Receivers			.5 mm	105 Cel	1.1 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm
ISL15102IRZ-T13	Renesas Electronics	LINE DRIVER																																	MATTE TIN			1									e3
MAX256ASA/V+	Maxim Integrated	LINE DRIVER																																	MATTE TIN			1									e3	30	260
MAX3041EWE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS		1500 ns	EIA-422; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified					YES	e0			10.3 mm	1.5 V	0 ns
MAX3041EWE+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS		1500 ns	EIA-422; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified					YES	e3	30	260	10.3 mm	1.5 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.