LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX234EWE-C78003	Analog Devices	LINE DRIVER																																	MATTE TIN			1									e3	30	260
MAX3293AUT	Maxim Integrated	LINE DRIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1		BICMOS		1300 ns	EIA-422; EIA-485		STANDARD	3.3 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3.135 V	.95 mm	125 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm						YES	e4	30	240	2.9 mm
MAX3293AUT+	Analog Devices	LINE DRIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1		BICMOS		1300 ns	EIA-422; EIA-485		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		Line Driver or Receivers		3.135 V	.95 mm	125 Cel		3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm	Not Qualified					YES	e4	30	260	2.9 mm	1.5 V	0 ns
MAX3295AUT/V+	Analog Devices	LINE DRIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1		BICMOS	AEC-Q100	1300 ns	EIA-422; EIA-485		STANDARD	3.3 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3.135 V	.95 mm	125 Cel			-40 Cel	1	NICKEL GOLD PALLADIUM	DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm						YES		30	260	2.9 mm
MAX9271GTJ+T	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1		CMOS			ISO 10605	75 mA	STANDARD	1.8 V		1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		1.7 V	.5 mm	105 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32	1	.8 mm	5 mm	Not Qualified					YES	e3	30	260	5 mm
SN65HVS882PWPRG4	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	34 V	1				10 ns	GENERAL PURPOSE	8.7 mA	STANDARD	12 V	34 V	10/34		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	10 V	Line Driver or Receivers		10 V	.65 mm	125 Cel	12 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	2	1.2 mm	4.4 mm	Not Qualified		TRUE			NO	e4	NOT SPECIFIED	260	9.7 mm	4 V	0 ns
SN65LBC174ADW	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified		TRUE			YES	e4	30	260	12.8 mm	1 V	0 ns
SN65LVDS93AIDGGQ1	Texas Instruments	LINE DRIVER												AEC-Q100																					NICKEL PALLADIUM GOLD			2									e4	30	260
SN75113NSRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		30 ns	GENERAL PURPOSE		GATED	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified				1 SINGLE INPUT DRIVER	YES	e4	30	260	10.2 mm	1.6 V	0 ns
SN75113NSRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		30 ns	GENERAL PURPOSE		GATED	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified				1 SINGLE INPUT DRIVER	YES	e4	30	260	10.2 mm	1.6 V	0 ns
SN75172DWE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		65 ns	V.11; EIA-422-B; EIA-485	60 mA	STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
SN75ALS191DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		TTL		7 ns	EIA-422-B; TIA-422-B; V.11	40 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	5 Amp	COMPLEMENTARY			YES	e4	30	260	4.9 mm	2 V	0 ns
SN75ALS192NSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		14 ns	EIA-422-B; TIA-422-B; V.11	45 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	2 Amp				YES	e4	30	260	10.2 mm	2 V	0 ns
SN75LBC172A16DW	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified		TRUE			YES	e4	30	260	10.3 mm	1 V	0 ns
SN75LBC172A16DWG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	10.3 mm	1 V	0 ns
SN75LBC172AN	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers		4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES	e4			19.305 mm	1 V	0 ns
SP26LV431CN-L/TR	Exar	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS		18 ns	EIA-422		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	70 Cel			0 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified					YES	e3		260	9.9 mm	2 V	0 ns
ADA4927-1YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,31				4.5 V	.5 mm	105 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm	3 mm	Not Qualified		COMPLEMENTARY			YES	e3		260	3 mm	7.6 V	0 ns
ADA4938-1ACPZ	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	VQCCN	SQUARE	UNSPECIFIED	YES	11 V	1					GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-XQCC-N16		1 mm	3 mm						YES				3 mm
ADA4938-1ACPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	1					GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	1 mm	3 mm	Not Qualified					YES	e3		260	3 mm		0 ns
ADA4950-1YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	1 mm	3 mm	Not Qualified					YES	e3			3 mm		0 ns
ADN4667ARUZ-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified					YES	e3	30	260	5 mm	.25 V	0 ns
DRV603PWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	2				GENERAL PURPOSE	1 mA		3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.2 mm	4.4 mm	Not Qualified		TRUE			YES	e4	30	260	5 mm	6.15 V	0 ns
DS25BR120TSD	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.6 V	1				.465 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-XDSO-N8	3	.8 mm	3 mm	Not Qualified					YES	e0			3 mm
DS26C31TMDC	National Semiconductor	LINE DRIVER	INDUSTRIAL	NO LEAD		DIE	UNSPECIFIED	UNSPECIFIED	YES	5.5 V	4		CMOS		11 ns	EIA-422		STANDARD	5 V		5		UNCASED CHIP	DIE OR CHIP		Line Driver or Receivers	.000001 Amp	4.5 V		85 Cel		3-STATE	-40 Cel	4		UPPER	X-XUUC-N	1			Not Qualified					YES		40	260		2 V	0 ns
DS26LS31CMWC	National Semiconductor	LINE DRIVER	COMMERCIAL	NO LEAD	16	DIE	RECTANGULAR	UNSPECIFIED	YES	5.25 V	4		BIPOLAR		15 ns	EIA-422; FED STD 1020		STANDARD	5 V		5		UNCASED CHIP	WAFER		Line Driver or Receivers	.00002 Amp	4.75 V		70 Cel		3-STATE	0 Cel	4		UPPER	R-XUUC-N16	1			Not Qualified					YES		40	260		2 V	0 ns
DS26LS31CN	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		15 ns	EIA-422; FED STD 1020		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDIP-T16	1	4.318 mm	7.62 mm	Not Qualified					YES	e0			19.05 mm	2 V	0 ns
DS90C387RVJD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644		STANDARD	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	8	TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified					YES	e0		260	14 mm		0 ns
DS90C387RVJD/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644	235 mA	STANDARD	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	8	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	14 mm		0 ns
DS90C387RVJDX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644	235 mA	STANDARD	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	8	TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified					YES	e0		260	14 mm		0 ns
DS90C387RVJDX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644	235 mA	STANDARD	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	8	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	14 mm		0 ns
DS90C401MX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		3.5 ns	EIA-644; TIA-644	14 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel	5 V	CONSTANT-CURRENT	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4.9 mm	.25 V	0 ns
DS90CF383BMT	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	60 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	4	TIN LEAD	DUAL	R-PDSO-G56	2	1.1 mm	6.1 mm	Not Qualified					YES	e0	20	235	14 mm		0 ns
DS90UB913ATRTVTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100						1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V				.5 mm	105 Cel	1.8 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm	5 mm				1		YES	e3	30	260	5 mm		0 ns
DS90UB929TRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			330 mA			1.89 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers	.00001 Amp		.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	9 mm	1.22 V
DS90UB947NTRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	1			AEC-Q100		GENERAL PURPOSE	469 mA	DIFFERENTIAL	1.1 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20			.00001 Amp	1.045 V	.5 mm	105 Cel		DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm		4 Amp	COMPLEMENTARY			YES	e4	30	260	9 mm	.63 V
DS90UH925QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1			AEC-Q100		ISO 10605	170 mA	STANDARD	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	3-STATE	-40 Cel	24	Matte Tin (Sn)	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		TRUE			YES	e3	NOT SPECIFIED	260	7 mm		0 ns
DS90UH925QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1			AEC-Q100		ISO 10605	170 mA	STANDARD	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V		-40 Cel	24	Matte Tin (Sn)	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified					YES	e3	NOT SPECIFIED	260	7 mm		0 ns
DS91M125TMAX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				8.5 ns		78 mA		3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.000015 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.91 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	9.9 mm		0 ns
HI-8382J	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1		CMOS		3000 ns	ARINC 429		DIFFERENTIAL	5 V	15 V	5,+-12/+-15		CHIP CARRIER	LDCC28,.5SQ	12 V	Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	1	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J28	3	4.597 mm	11.5062 mm	Not Qualified		COMPLEMENTARY		ADJUSTABLE ARINC RISE AND FALL TIMES	YES	e0	30	225	11.5062 mm	9.5 V	0 ns
HI-8596PCT	Holt Integrated Circuits	LINE DRIVER	MILITARY	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.45 V	1		CMOS			ARINC 429		STANDARD	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers	.0000001 Amp	3.15 V	.65 mm	125 Cel		3-STATE	-55 Cel	1	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-N16	3	1 mm	4 mm	Not Qualified					YES	e0	30	240	4 mm	9 V	0 ns
HI-8596PCTF	Holt Integrated Circuits	LINE DRIVER	MILITARY	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.45 V	1		CMOS			ARINC 429		STANDARD	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers	.0000001 Amp	3.15 V	.65 mm	125 Cel		3-STATE	-55 Cel	1	MATTE TIN (SN)	QUAD	S-PQCC-N16	3	1 mm	4 mm	Not Qualified					YES	e3	40	260	4 mm	9 V	0 ns
LMH0001SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE	43 mA	DIFFERENTIAL	3.3 V	3.465 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.135 V	Line Driver or Receivers		3.135 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	1	.8 mm	4 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4 mm	.75 V	0 ns
LMH6555SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	1					156 mA		3.3 V	3.63 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,20	2.97 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	3	.8 mm	4 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4 mm	2.4 V	0 ns
LT1030CDR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4		BIPOLAR			EIA-232-F; TIA-232-F	.1 mA	STANDARD	12 V	15 V	+-5/+-15	-12 V	SMALL OUTLINE	SOP14,.25	5 V	Line Driver or Receivers	.00002 Amp	5 V	1.27 mm	70 Cel	12 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.75 mm	3.9 mm	Not Qualified		INVERTED			NO	e4	NOT SPECIFIED	260	8.65 mm	3.3 V	0 ns
LT1030CDRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4		BIPOLAR			EIA-232-F; TIA-232-F		STANDARD	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00002 Amp	5 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.75 mm	3.9 mm	Not Qualified		INVERTED			NO	e4	30	260	8.65 mm	3.3 V	0 ns
LT1030CDRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4		BIPOLAR			EIA-232-F; TIA-232-F		STANDARD	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00002 Amp	5 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.75 mm	3.9 mm	Not Qualified					NO	e4	30	260	8.65 mm	3.3 V	0 ns
LTC1688IS#TRPBF	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4				12 ns	EIA-422; EIA-485		STANDARD	5 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.