LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
LTC1689CS#PBF	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	CMOS		12 ns	EIA-422; EIA-485		STANDARD	5 V				SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm
LTC1689CS#TRPBF	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	CMOS		12 ns	EIA-422; EIA-485		STANDARD	5 V				SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3			9.9 mm
MAX9235ETE+T	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	QCCN	SQUARE		PLASTIC/EPOXY	YES							45 mA		3.3 V		3.3		CHIP CARRIER	LCC16,.12SQ,20		Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16	1			Not Qualified						e3	30	260
MAX9260GCB/V+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	64	HTFQFP	SQUARE		PLASTIC/EPOXY	YES	1.9 V	1	CMOS			ISO 10605		STANDARD	1.8 V				FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH					1.7 V	.5 mm	105 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified					YES	e3	30	260	10 mm
MAX9264GCB/V+TGB	Maxim Integrated	LINE DRIVER																																	MATTE TIN			3									e3	30	260
MC3487DR2	Motorola	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4			20 ns	EIA-422	85 mA	STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e0			9.9 mm	2 V
MC3487DRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	85 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	9.9 mm	2 V	0 ns
SN55LVDS31W	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	3.6 V	4	CMOS		4.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		FLATPACK	FL16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	125 Cel	3.3 V	3-STATE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified		TRUE			YES	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm	.247 V	0 ns
SN65LBC174AN	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4	BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers		4.75 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE			YES	e4			19.305 mm	1 V	0 ns
SN65LVDS311YFFR	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	49	VFBGA	SQUARE		PLASTIC/EPOXY	YES	1.95 V	1	CMOS			GENERAL PURPOSE	36.8 mA	STANDARD	1.8 V	1.95 V	1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA49,7X7,16	1.65 V	Line Driver or Receivers	.0000002 Amp	1.65 V	.4 mm	85 Cel	1.8 V	DIFFERENTIAL	-40 Cel	3	TIN SILVER COPPER	BOTTOM	S-PBGA-B49	1	.625 mm	3.09 mm	Not Qualified		COMPLEMENTARY			YES	e1	30	260	3.09 mm		0 ns
SN65LVDS389DBTR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	38	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	8	CMOS		2.9 ns	EIA-644; TIA-644	70 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	2	1.2 mm	4.4 mm	Not Qualified		TRUE			YES	e4	30	260	9.7 mm	.247 V	0 ns
SN65LVDS84AQDGGRQ1	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	CMOS	AEC-Q100		EIA-644; TIA-644	39 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	125 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.5 mm		0 ns
SN75158PE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		25 ns	EIA-422-B; TIA-422-B; V.11	50 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel	5 V	DIFFERENTIAL	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	2 V	0 ns
SN75158PS	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2			20 ns	EIA-422-B; V.11		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm	5.3 mm	Not Qualified					YES	e4	30	260	6.2 mm
SN75158PSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	50 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.3	4.75 V	Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm	5.3 mm	Not Qualified					YES	e4	30	260	6.2 mm	2 V	0 ns
SN75158PSRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE	SOP8,.3		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm	5.3 mm	Not Qualified					YES	e4	30	260	6.2 mm	2 V	0 ns
SN75188NSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	4	BIPOLAR		350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	SMALL OUTLINE	SOP14,.3	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	1.27 mm	70 Cel	9 V	OPEN-COLLECTOR	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO	e4	NOT SPECIFIED	260	10.2 mm	12 V	0 ns
SN75ALS191PSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2	TTL		7 ns	EIA-422-B; TIA-422-B; V.11	40 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.3	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	1.27 mm	70 Cel	5 V		0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm	5.3 mm	Not Qualified	5 Amp				YES	e4	30	260	6.2 mm	2 V	0 ns
SN75LBC174A16DW	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified		TRUE			YES	e4	30	260	10.3 mm	1 V	0 ns
SN75LVDS389DBTG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	38	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	8	CMOS		2.9 ns	EIA-644; TIA-644	70 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V	3-STATE	0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	2	1.2 mm	4.4 mm	Not Qualified		TRUE			YES	e4	30	260	9.7 mm	.247 V	0 ns
SN75LVDS391DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	CMOS		2.9 ns	EIA-644; TIA-644	26 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	70 Cel	3.3 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.91 mm	Not Qualified		TRUE			YES	e4	30	260	9.9 mm	.247 V	0 ns
SN75LVDS391DRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	CMOS		2.9 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.91 mm	Not Qualified					YES	e4	30	260	9.9 mm	.247 V	0 ns
SN75LVDS391PW	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	CMOS		2.9 ns	EIA-644; TIA-644	26 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	70 Cel	3.3 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified		TRUE			YES	e4	30	260	5 mm	.247 V	0 ns
THC63LVD827	Thine Electronics	LINE DRIVER	INDUSTRIAL	BALL	72	TFBGA	SQUARE		PLASTIC/EPOXY	YES	1.98 V	8	CMOS			GENERAL PURPOSE	88 mA	STANDARD	1.8 V				GRID ARRAY, THIN PROFILE, FINE PITCH	BGA72,9X9,25			.00001 Amp	1.62 V	.65 mm	85 Cel		DIFFERENTIAL	-40 Cel	8		BOTTOM	S-PBGA-B72		1.2 mm	7 mm			COMPLEMENTARY			YES				7 mm	.14 V
5962F9666302VXC	Renesas Electronics	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	300k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4	CMOS	MIL-PRF-38535 Class V	42 ns	EIA-422		STANDARD	3.3 V				FLATPACK					3 V	1.27 mm	125 Cel			-55 Cel	4	GOLD	DUAL	R-CDFP-F16		2.92 mm	6.73 mm	Qualified					YES	e4
ADA4939-1YCPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE		UNSPECIFIED	YES	5.25 V	1	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	1 mm	3 mm	Not Qualified					YES	e3		260	3 mm		0 ns
ADA4950-2YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE		UNSPECIFIED	YES	11 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
ADN4665ARUZ-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	TSSOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified					YES	e3	30	260	5 mm	.25 V	0 ns
ADN4665ARZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm	.25 V	0 ns
ADN4665ARZ-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm	.25 V	0 ns
AEIC-2631-S16	Broadcom	LINE DRIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	30 V	4			310 ns	EIA-422-A		SCHMITT TRIGGER	2 V		2/24		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.000004 Amp		1.27 mm	125 Cel			-55 Cel	4		DUAL	R-PDSO-G16	1	1.72 mm	3.89 mm	Not Qualified					YES				9.89 mm	2 V	0 ns
AEIC-2631-S16TR	Broadcom	LINE DRIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	30 V	4			310 ns	EIA-422-A		SCHMITT TRIGGER	2 V				SMALL OUTLINE						1.27 mm	125 Cel			-55 Cel	4		DUAL	R-PDSO-G16	1	1.72 mm	3.89 mm						YES				9.89 mm
AM26C31CDE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	20 Amp	COMPLEMENTARY			YES	e4	30	260	9.9 mm	2 V	0 ns
AM26C31CNE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	4	BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3 mA	STANDARD	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	20 Amp				YES	e4			19.305 mm	2 V	0 ns
AM26C31IPWE4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified					YES	e4	30	260	5 mm	2 V	0 ns
AM26LV31INSRE4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-45 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified				BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	10.2 mm	.95 V	0 ns
AM26LV31INSRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-45 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified				BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	10.2 mm	.95 V	0 ns
DS25BR101TSDE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1			.465 ns		43 mA		3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N8	3	.8 mm	3 mm	Not Qualified	.01 Amp	COMPLEMENTARY	1		YES	e3	30	260	3 mm		0 ns
DS30BA101SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.465 V	1					59 mA		3.3 V	3.465 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.135 V	Line Driver or Receivers		3.135 V	.635 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	3	.8 mm	4 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	4 mm		0 ns
DS96174CN	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO		4	BIPOLAR		25 ns	EIA-422-A; EIA-485		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDIP-T16	1	5.08 mm	7.62 mm	Not Qualified					YES	e0			19.304 mm	1.5 V	0 ns
HI-8585CRM	Holt Integrated Circuits	LINE DRIVER	MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	16.5 V	1	CMOS			ARINC 429		STANDARD	15 V		+-12/+-15	-15 V	IN-LINE	DIP8,.3		Line Driver or Receivers		11.4 V	2.54 mm	125 Cel			-55 Cel	1	TIN LEAD	DUAL	R-GDIP-T8		5.08 mm	7.62 mm	Not Qualified				BURN IN	NO	e0			9.652 mm	9 V	0 ns
LTC486CSW#TRPBF	Analog Devices	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4	CMOS		50 ns	EIA-422; EIA-485		STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	4	MATTE TIN	DUAL	R-PDIP-T16	1	2.65 mm	7.62 mm	Not Qualified					YES	e3	30	260	10.3 mm
MAX3045BESE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	CMOS		1500 ns	EIA-422; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e0			9.9 mm	1.5 V	0 ns
MAX3045BESE+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	CMOS		1500 ns	EIA-422; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm	1.5 V	0 ns
MAX96709GTG+	Analog Devices	LINE DRIVER																																	Matte Tin (Sn) - annealed			1									e3	30	260
PI90LV01TEX	Diodes Incorporated	LINE DRIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2.7 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		Line Driver or Receivers	.00002 Amp	3 V	.95 mm	105 Cel			-40 Cel	1		DUAL	R-PDSO-G5	1	1.45 mm	1.625 mm	Not Qualified					YES				2.9 mm	.247 V
SN65LBC174AMDWREP	Texas Instruments	LINE DRIVER	MILITARY	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2	BICMOS		16 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified		TRUE			YES	e4	30	260	12.8 mm	.8 V	0 ns
SN65LVDS047DR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	CMOS		2.8 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		TRUE			YES	e4	30	260	9.9 mm	.25 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.