LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS90UB948TNKDTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2		AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm	9 mm				2		NO	e3	30	260	9 mm
DS96F174ME/883	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BIPOLAR	MIL-STD-883	25 ns	EIA-485; EIA-422	50 mA		5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4		QUAD	S-CQCC-N20	1	1.91 mm	8.89 mm	Not Qualified	60 Amp	TRUE			YES				8.89 mm	1.5 V	0 ns
5962-7802301MFA	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	QFF	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4	BIPOLAR	MIL-STD-883	30 ns	EIA-422-B; TIA-422-B; V.11	80 mA	STANDARD	5 V	5.5 V	5		FLATPACK	FL16,.3	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Qualified	20 Amp			LG_MAX	YES	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm	2 V	0 ns
5962-9163901M2A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	CMOS	38535Q/M;38534H;883B	14 ns	EIA-422	3.2 mA	STANDARD	4 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	QUAD	S-CQCC-N20		1.905 mm	8.89 mm	Qualified	20000 Amp				YES	e0			8.89 mm	2 V	0 ns
5962-9762101VFA	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	3.6 V	4		MIL-PRF-38535 Class V	4.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V			FLATPACK		3 V		.00002 Amp	3 V	1.27 mm	125 Cel	3.3 V	3-STATE	-55 Cel	4	TIN LEAD	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Qualified		TRUE			YES	e0			10.16 mm	.247 V	0 ns
5962-9858401QFA	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	3.6 V	4	CMOS	MIL-PRF-38535 Class Q	25 ns	EIA-422-B; TIA-422-B; V.11	.1 mA	STANDARD	3.3 V	3.6 V			FLATPACK		3 V			3 V	1.27 mm	125 Cel	3.3 V		-55 Cel	4	TIN LEAD	DUAL	R-GDFP-F16	1	2.032 mm	6.35 mm	Qualified				LG-MAX	YES	e0			9.906 mm
AD8321ARZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1				GENERAL PURPOSE		DIFFERENTIAL	9 V				SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified					NO	e3		260	12.8 mm		0 ns
ADA4927-2YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	105 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
ADA4939-2YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
ADN4667ARZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	6 mm	Not Qualified					YES	e3	30	260	9.9 mm	.25 V	0 ns
AM26LS30PC	Onsemi	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		200 ns	EIA-422-A; EIA-423-A		STANDARD	5 V		5/+-5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDIP-T16		4.44 mm	7.62 mm	Not Qualified				CONFIGURABLE INTERFACE STANDARDS	YES	e0	30	235	19.175 mm	2 V	0 ns
AM7968-125JC	Rochester Electronics	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR			GENERAL PURPOSE		STANDARD	5 V				CHIP CARRIER					4.5 V	1.27 mm	70 Cel			0 Cel	1		QUAD	S-PQCC-J28		4.572 mm	11.5062 mm						YES		NOT SPECIFIED	NOT SPECIFIED	11.5062 mm
CLC001AJE-TR13/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	CONSTANT-CURRENT	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4.9 mm		0 ns
DEI1026-G	Device Engineering	LINE DRIVER	OTHER	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		150 ns	GENERAL PURPOSE		STANDARD	5 V				SMALL OUTLINE	SOP16,.25				4.5 V	1.27 mm	85 Cel			-55 Cel	6	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.7526 mm	3.9116 mm	Not Qualified					NO	e4	30	260	9.8933 mm		0 ns
DS1488MX	National Semiconductor	LINE DRIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	BIPOLAR		350 ns	EIA-232-D; V.24		GATED	9 V		+-9	-9 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00001 Amp		1.27 mm	75 Cel	-9 V	TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER; PROGRAMMABLE SLEW RATE	NO	e0			8.65 mm	12 V	0 ns
DS14C88M/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12.6 V	4	CMOS		6000 ns	EIA-232-D; V.28	.5 mA	GATED	9 V	12.6 V	+-4.5/+-12	-9 V	SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel	9 V		0 Cel	4	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e3	30	260	8.65 mm	6 V	0 ns
DS26C31MJ/883	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.5 V	4	CMOS	MIL-STD-883	14 ns	EIA-422	2 mA	STANDARD	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	2.54 mm	125 Cel	5 V	3-STATE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-CDIP-T16	1	5.08 mm	7.62 mm	Not Qualified		TRUE		LG-MAX	YES	e0	NOT SPECIFIED	NOT SPECIFIED	19.94 mm	2 V	0 ns
DS26LS31MJ-SMD	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR	MIL-STD-883	30 ns	EIA-422; FED STD 1020	60 mA	STANDARD	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	2.54 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	DUAL	R-GDIP-T16	1	5.08 mm	7.62 mm	Not Qualified				LG_MAX; SEATED HGT-NOM	YES	e0			19.94 mm	2 V	0 ns
DS90C031TM/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		3.5 ns	EIA-644; TIA-644; IEEE 1596.3		STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm	.25 V	0 ns
DS90C363MTD	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS			EIA-644; TIA-644	55 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e0	20	235	12.5 mm		0 ns
DS90C401M/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		3.5 ns	EIA-644; TIA-644	14 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel	5 V	CONSTANT-CURRENT	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4.9 mm	.25 V	0 ns
DS90CF563MTD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	CMOS			EIA-644; TIA-644	45 mA	STANDARD	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers			.5 mm	70 Cel			-10 Cel	4	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified					YES	e0	30	235	12.5 mm		0 ns
DS90CR217MTD/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644; TIA-644	57 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	3	MATTE TIN	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	12.5 mm		0 ns
DS90CR287MTD/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		1.5 ns	EIA-644; TIA-644	60 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		-10 Cel	4	MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified					YES	e3	30	260	14 mm	2.7 V	0 ns
DS90UB921TRHSRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100		GENERAL PURPOSE		STANDARD	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel	1	Matte Tin (Sn)	QUAD	S-PQCC-N48	3	.8 mm	7 mm						YES	e3	30	260	7 mm
DS90UB925QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100		ISO 10605	170 mA	STANDARD	3.3 V	3.6 V	1.8/3.3,3.3		CHIP CARRIER	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns
DS90UB927QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100			160 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm			COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
DS90UB927QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100			160 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm			COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
DS90UB933TRTVRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1		AEC-Q100		ISO 10605		STANDARD	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm	5 mm						YES	e3	30	260	5 mm
DS90UH925ATRHSTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100		ISO 10605		STANDARD	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel	1	Matte Tin (Sn)	QUAD	S-PQCC-N48	3	.8 mm	7 mm						YES	e3	NOT SPECIFIED	260	7 mm
DS90UH929TRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100			330 mA			1.89 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm	1.197 V
DS90UH947NTRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	2		AEC-Q100			469 mA		1.1 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20				1.045 V	.5 mm	105 Cel		DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm			COMPLEMENTARY			YES	e4	30	260	9 mm	.9 V
DS91M125TMA/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			8.5 ns		78 mA		3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.000015 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.91 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	9.9 mm		0 ns
DS92LV1021AMSA/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	55 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	3	2 mm	5.29 mm	Not Qualified					YES	e3	30	260	10.2 mm		0 ns
DS9638J/883	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	TTL	MIL-STD-883	20 ns	EIA-422	65 mA	STANDARD	5 V	5.5 V	5		IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.000025 Amp	4.5 V	2.54 mm	125 Cel	5 V	DIFFERENTIAL	-55 Cel	2	TIN LEAD	DUAL	R-GDIP-T8	1	5.08 mm	7.62 mm	Not Qualified	.05 Amp	COMPLEMENTARY			YES	e0			10.16 mm	4.5 V	0 ns
DSLVDS1047PWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.65 mm	85 Cel	3.3 V		-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm						YES	e3	30	260	5 mm
FIN1047MTC	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified					YES	e4	30	260	5 mm	.25 V	0 ns
HI-3182PSI-N	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		3000 ns	ARINC 429		DIFFERENTIAL	5 V	16.5 V		-15 V	SMALL OUTLINE		10.8 V			4.75 V	1.27 mm	85 Cel	15 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16	1	2.6435 mm	7.493 mm	Not Qualified					YES	e0			10.287 mm		0 ns
HI-84201PSTF	Holt Integrated Circuits	LINE DRIVER	MILITARY	GULL WING	16	LSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		150 ns	GENERAL PURPOSE		STANDARD	5 V				SMALL OUTLINE, LOW PROFILE	SOP16,.25				4.5 V	1.27 mm	125 Cel			-55 Cel	6	Matte Tin (Sn)	DUAL	R-PDSO-G16		1.5 mm	3.9 mm						NO	e3			9.9 mm
HI-8571PSI	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.3 V	2	CMOS			ARINC 429		STANDARD	5 V		+-5	-5 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers	.0000001 Amp	4.8 V	1.27 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.626 mm	3.9 mm	Not Qualified					YES	e0	30	240	4.915 mm	9 V	0 ns
HI-8586CRI	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	16.5 V	1	CMOS			ARINC 429		STANDARD	15 V		+-12/+-15	-15 V	IN-LINE	DIP8,.3		Line Driver or Receivers		11.4 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-GDIP-T8		5.08 mm	7.62 mm	Not Qualified				CAN ALSO OPERATE WITH A +/-15V SUPPLY	NO	e0			9.652 mm	9 V	0 ns
HI-8592PSI	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	GULL WING	14	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS			ARINC 429		STANDARD	5 V		5	-5 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP14,.25		Line Driver or Receivers	.0000001 Amp	4.85 V	1.27 mm	85 Cel		3-STATE	-40 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G14	1	1.527 mm	3.87 mm	Not Qualified					YES	e0	30	240	8.65 mm	9 V	0 ns
HI-8592PSIF	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	GULL WING	14	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS			ARINC 429		STANDARD	5 V		5	-5 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP14,.25		Line Driver or Receivers	.0000001 Amp	4.85 V	1.27 mm	85 Cel		3-STATE	-40 Cel	2	Matte Tin (Sn)	DUAL	R-PDSO-G14	1	1.527 mm	3.87 mm	Not Qualified					YES	e3	40	260	8.65 mm	9 V	0 ns
ISL32614EFHZ-T7A	Renesas Electronics	LINE DRIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.3 V	1	BICMOS			EIA-422; EIA-485		STANDARD					SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					1.8 V	.95 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G6	2	1.45 mm	1.6 mm						YES	e3	30	260	2.9 mm
LMH0002MAX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1				GENERAL PURPOSE	49 mA	DIFFERENTIAL	3.3 V	3.399 V	3.3		SMALL OUTLINE	SOP8,.25	3.201 V	Line Driver or Receivers		3.135 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4.9 mm	.75 V	0 ns
LMH0340SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	5				GENERAL PURPOSE	85 mA	DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V	OPEN-COLLECTOR	-40 Cel	5	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm			TRUE			NO	e3	30	260	7 mm	2.7 V	0 ns
LT6301CFE#PBF	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified					YES	e3	30	260	9.7 mm
LTC1045CSW#TRPBF	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	6	CMOS			EIA-232		STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	6	MATTE TIN	DUAL	R-PDSO-G20	1	2.642 mm	7.493 mm						NO	e3	30	260	12.8015 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.