LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS99R101VSX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
SN55110AJ	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR		15 ns	V.35	35 mA	GATED	5 V	5.5 V	+-5	-5 V	IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel	5 V	OPEN-COLLECTOR	-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified	.04 Amp	COMPLEMENTARY		HIGH DRIVE	YES	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	2 V	0 ns
DS92LV0411SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	36	VQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	4					GENERAL PURPOSE	90 mA	STANDARD	1.8 V	3.6 V	1.8,3.3		CHIP CARRIER, VERY THIN PROFILE	LCC36,.25SQ,20	3 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
DS99R101VS	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
SN55113W	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2		BIPOLAR		20 ns	GENERAL PURPOSE	65 mA	GATED	5 V		5		FLATPACK	FL16,.3		Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel			-55 Cel	2		DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified		COMPLEMENTARY		1 SINGLE INPUT DRIVER	YES		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	1.6 V	0 ns
DS92LX2121SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	90 mA	STANDARD	1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	21	MATTE TIN	QUAD	S-XQCC-N40	3	.8 mm	6 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
DS32EL0421SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	2					EIA-644; TIA-644	152 mA	DIFFERENTIAL	3.3 V	2.625 V	2.5,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	2.375 V	Line Driver or Receivers		3.135 V	.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		TRUE			YES	e3	30	260	7 mm		0 ns
DRV612PWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	2				GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.2 mm	4.4 mm	Not Qualified					NO	e4	NOT SPECIFIED	260	5 mm	6.15 V	0 ns
DRV600RTJR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	2	2				GENERAL PURPOSE	10 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	4.5 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	1.8 V	Line Driver or Receivers	.000001 Amp	1.8 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20	2	.8 mm	4 mm	Not Qualified		TRUE			YES	e4	30	260	4 mm	6.15 V	0 ns
TLC59213AIPWT	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	8	8	BICMOS		250 ns	GENERAL PURPOSE	13 mA	STANDARD	5.5 V	13.2 V	4.5/13.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	4.5 V	Display Drivers		4.5 V	.65 mm	85 Cel			-40 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified		TRUE			NO	e4	30	260	6.5 mm		0 ns
M38510/10403BEX	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.5 V	2				30 ns			DIFFERENTIAL	5 V	5.5 V		-5 V	IN-LINE		4.5 V			4.5 V		125 Cel	5 V		-55 Cel			DUAL	R-CDIP-T14				Qualified					YES						30 ns
SNJ55LBC172W	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.25 V	4		BICMOS	MIL-PRF-38535	40 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		FLATPACK	FL16,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified	.1 Amp	TRUE			YES	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm	1.1 V	0 ns
8004102EX	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1				25 ns	GENERAL PURPOSE		STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	2		DUAL	R-GDIP-T16		5.08 mm	7.62 mm					CONFIGURABLE INTERFACE STANDARDS; INDIVIDUAL ENABLES	YES				19.43 mm
M38510/10403BEA	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.5 V	2		BIPOLAR	MIL-PRF-38535 Class B	30 ns		50 mA	DIFFERENTIAL	5 V	5.5 V	5	-5 V	IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel	5 V	DIFFERENTIAL	-55 Cel	2	TIN LEAD	DUAL	R-CDIP-T14				Qualified	.04 Amp	COMPLEMENTARY			YES	e0				1.6 V	30 ns
N8T23N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		25 ns	IBM 360	60 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	1		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE			NO				19.305 mm
DS3487MX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4		BIPOLAR		15 ns	EIA-422		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e0	20	235	9.9 mm	2 V	0 ns
SN5510AFKR	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR		25 ns	V.35		GATED	5 V			-5 V	CHIP CARRIER					4.5 V	1.27 mm	125 Cel			-55 Cel	2		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified				HIGH DRIVE	YES				8.89 mm		0 ns
DS92LV1023TMSA	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1		CMOS				90 mA		3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers			.635 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1			Not Qualified						e0	20	235			0 ns
DS99R103TVS	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
CLC005AJEX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1					GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified				CAN ALSO OPERATE WITH A -5.2V SUPPLY	YES				4.9 mm
DRV612RGTT	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	2				GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	3 V	Line Driver or Receivers	.000001 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N16	2	1 mm	3 mm	Not Qualified					NO	e4	NOT SPECIFIED	260	3 mm	6.15 V	0 ns
SN55LBC172W	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.25 V	4		BICMOS		40 ns	EIA-485		STANDARD	5 V				FLATPACK					4.75 V	1.27 mm	125 Cel		3-STATE	-55 Cel	4		DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified		COMPLEMENTARY			YES				10.2 mm
DRV600RTJRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	2					GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20		Line Driver or Receivers	.000001 Amp	1.8 V	.5 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20	2	.8 mm	4 mm	Not Qualified					YES	e4	30	260	4 mm	6.15 V	0 ns
SCAN928028TUFX	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	196	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS		.4 ns	IEEE 1149.1	350 mA	STANDARD	3.3 V		3.3		GRID ARRAY, LOW PROFILE	BGA196,14X14,40		Line Driver or Receivers		3 V	1 mm	85 Cel			-40 Cel	8	TIN LEAD	BOTTOM	S-PBGA-B196	3	1.47 mm	15 mm	Not Qualified					YES	e0	20	220	15 mm		0 ns
TB5D2HDR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				3.5 ns	GENERAL PURPOSE	40 mA	STANDARD	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	NOT SPECIFIED	250	9.9 mm	.5 V	0 ns
MM78C30J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	15 V	2				400 ns			GATED	4.5 V				IN-LINE					3 V	2.54 mm	125 Cel			-55 Cel	2		DUAL	R-CDIP-T14		5.08 mm	7.62 mm						YES				19.939 mm
SN55121FK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	2		BIPOLAR		50 ns	GENERAL PURPOSE		GATED	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	125 Cel		OPEN-EMITTER	-55 Cel	2		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified		TRUE			NO		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	2.4 V	0 ns
LMH6678LQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	3.63 V	2					GENERAL PURPOSE		DIFFERENTIAL	3.3 V	13.2 V	3.3,12		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20	10.8 V	Line Driver or Receivers	.0000005 Amp	2.97 V	.5 mm	85 Cel	12 V		-40 Cel	2	TIN LEAD	QUAD	R-XQCC-N24	2	.8 mm	4 mm	Not Qualified					YES	e0		235	5 mm	11.25 V	0 ns
DS92LV2411SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1					GENERAL PURPOSE	85 mA	STANDARD	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
TLC59213IPWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	8	8	BICMOS		250 ns	GENERAL PURPOSE	13 mA	STANDARD	5.5 V	13.2 V	4.5/13.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	4.5 V	Display Drivers		4.5 V	.65 mm	85 Cel			-40 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified		TRUE			NO	e4	30	260	6.5 mm		0 ns
100323FM	Texas Instruments	LINE DRIVER
SCAN921025HSM	Texas Instruments	LINE DRIVER	AUTOMOTIVE	BALL	49	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			IEEE 1149.1	105 mA	STANDARD	3.3 V	3.6 V	3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA49,7X7,32	3 V	Line Driver or Receivers		3 V	.8 mm	125 Cel	3.3 V	3-STATE	-40 Cel	1	TIN LEAD	BOTTOM	S-PBGA-B49	3	1.5 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e0	20	235	7 mm	2.2 V	0 ns
M38510/10403BFX	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2			MIL-PRF-38535 Class B	30 ns			DIFFERENTIAL	5 V				FLATPACK					4.5 V		125 Cel			-55 Cel			DUAL	R-CDFP-F16				Not Qualified					YES						30 ns
DRV601RTJTG4	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	2					GENERAL PURPOSE		STANDARD	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20		Line Driver or Receivers	.000001 Amp	1.8 V	.5 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20	2	.8 mm	4 mm	Not Qualified					NO	e4	30	260	4 mm	6.15 V	0 ns
SN55111FK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	1		BIPOLAR		15 ns	GENERAL PURPOSE	40 mA	STANDARD	5 V		+-5	-5 V	CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	125 Cel		OPEN-COLLECTOR	-55 Cel	4		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	8.89 mm		0 ns
79009012X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2				25 ns	GENERAL PURPOSE		STANDARD	5 V				CHIP CARRIER					4.5 V		125 Cel			-55 Cel	2		QUAD	S-CQCC-N20				Qualified					YES
SN55LBC173FP	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	4		BICMOS			V.11; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.75 V		125 Cel			-55 Cel			QUAD	S-CQCC-N20				Not Qualified			4								35 ns
DRV600RTJT	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	2					GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20		Line Driver or Receivers	.000001 Amp	1.8 V	.5 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20	2	.8 mm	4 mm	Not Qualified					YES	e4	30	260	4 mm	6.15 V	0 ns
XTHS6301IRSAT	Texas Instruments	LINE DRIVER
N8T13D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		25 ns	IBM 360	60 mA	GATED	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		OPEN-EMITTER	0 Cel	2		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE			NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	2.4 V	0 ns
JM38510/10405BEA	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.5 V	2		BIPOLAR	MIL-M-38510	20 ns	GENERAL PURPOSE		GATED	5 V	5.5 V			IN-LINE		4.5 V			4.5 V	2.54 mm	125 Cel	5 V		-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified				1 SINGLE INPUT DRIVER	YES	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm
TB5D2HDWRE4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				3.5 ns	GENERAL PURPOSE		STANDARD	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	30	250	10.3 mm	.5 V	0 ns
DS92LV2421SQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.71 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-XQCC-N48		.8 mm	7 mm	Not Qualified					YES				7 mm
SCAN928028TUF/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	196	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS		.4 ns	IEEE 1149.1	350 mA	STANDARD	3.3 V	3.6 V	3.3		GRID ARRAY, LOW PROFILE	BGA196,14X14,40	3 V	Line Driver or Receivers		3 V	1 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	8	TIN SILVER COPPER	BOTTOM	S-PBGA-B196	3	1.47 mm	15 mm	Not Qualified		TRUE			YES	e1	30	260	15 mm		0 ns
UC5171QTR	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8					EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm	9 V	0 ns
CLC005AJE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1					GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified				CAN ALSO OPERATE WITH A -5.2V SUPPLY	YES	e3	30	260	4.9 mm		0 ns
DS32ELX0421SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	2					EIA-644; TIA-644	152 mA	DIFFERENTIAL	3.3 V		2.5,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		Line Driver or Receivers		3.135 V	.5 mm	85 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
TLC59213AIPW	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	8	8			250 ns	GENERAL PURPOSE		STANDARD		13.2 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4.5 V			4.5 V	.65 mm	85 Cel			-40 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm						NO	e4	30	260	6.5 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.