LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS92LV1021AMSA	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE	55 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm		5.29 mm	Not Qualified					YES	e0	20	235	10.2 mm		0 ns
CLC005AJE	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1					GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified				CAN ALSO OPERATE WITH A -5.2V SUPPLY	YES	e0	20	235	4.9 mm		0 ns
LM2512ASMX/NOPB	Texas Instruments	LINE DRIVER	OTHER	BALL	49	FBGA	SQUARE	PLASTIC/EPOXY	YES								9 mA				1.8,1.8/3		GRID ARRAY, FINE PITCH	BGA49,7X7,20		Line Driver or Receivers			.5 mm	85 Cel			-30 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B49	3				Not Qualified						e1	30	260			0 ns
SN55ALS130J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.95 V	1		BIPOLAR		28 ns	IBM 360/370	47 mA	STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.5 V	2.54 mm	125 Cel			-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		COMMON FAULT FLAG	YES		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	2.96 V	0 ns
SNSNYLVDSZQLR	Texas Instruments	LINE DRIVER	COMMERCIAL	BALL	56	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	5					GENERAL PURPOSE		STANDARD	3.3 V	3.6 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH		3 V			3 V	.65 mm	70 Cel	3.3 V		-10 Cel	5	TIN SILVER COPPER	BOTTOM	R-PBGA-B56	2	1 mm		4.5 mm						YES	e1	30	260	7 mm
TB5D2HLD	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				3.5 ns	GENERAL PURPOSE		STANDARD	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	30	250	9.9 mm	.5 V	0 ns
DRV601RTJ	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	2					GENERAL PURPOSE		STANDARD	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.8 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N20		.8 mm		4 mm	Not Qualified					NO				4 mm
DS92LV2421SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	90 mA	STANDARD	1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	24	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm		7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns
TLC59212IN	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	8		BICMOS			GENERAL PURPOSE		STANDARD	5 V		5		IN-LINE	DIP20,.3		Peripheral Drivers		4.5 V	2.54 mm	85 Cel			-40 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T20					Not Qualified					NO	e4					0 ns
SN55183FKR	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V				CHIP CARRIER					4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel	2		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Not Qualified		COMPLEMENTARY			YES				8.89 mm		0 ns
SN55188J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	15 V	4		BIPOLAR		350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	IN-LINE	DIP14,.3	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	2.54 mm	125 Cel	9 V	TOTEM-POLE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Not Qualified	.01 Amp	INVERTED		1 SINGLE INPUT DRIVER	NO	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	12 V	0 ns
DS30BA101SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1						59 mA		3.3 V	3.465 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.135 V	Line Driver or Receivers		3.135 V	.635 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	3	.8 mm		4 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	4 mm		0 ns
SNJ55188J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	15 V	4		BIPOLAR	MIL-PRF-38535	350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	IN-LINE	DIP14,.3	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	2.54 mm	125 Cel	9 V	TOTEM-POLE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Not Qualified	.01 Amp	INVERTED		1 SINGLE INPUT DRIVER	NO	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	12 V	0 ns
DS160PR822NJXT	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	8	8			.12 ns	COMPLEMENTARY	360 mA	DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.21X.39,16				3 V	.4 mm	85 Cel		DIFFERENTIAL	-40 Cel	8	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N64	2	.8 mm		5.5 mm		-4 Amp	COMPLEMENTARY	8		YES	e4	30	260	10 mm		.12 ns
SN55LBC172FKR	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	4		BICMOS		40 ns	EIA-485		STANDARD	5 V				CHIP CARRIER					4.75 V	1.27 mm	125 Cel		3-STATE	-55 Cel	4		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Not Qualified		COMPLEMENTARY			YES				8.89 mm
SCAN928028TUFX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	196	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS		.4 ns	IEEE 1149.1	350 mA	STANDARD	3.3 V		3.3		GRID ARRAY, LOW PROFILE	BGA196,14X14,40		Line Driver or Receivers		3 V	1 mm	85 Cel			-40 Cel	8	TIN SILVER COPPER	BOTTOM	S-PBGA-B196	3	1.47 mm		15 mm	Not Qualified					YES	e1	30	260	15 mm		0 ns
SM65MLVD047APWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.4 ns	EIA-899; TIA-899		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel			-40 Cel	4		DUAL	R-PDSO-G16		1.2 mm		4.4 mm	Not Qualified					YES				5 mm	.48 V	0 ns
N8T23D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		25 ns	IBM 360	60 mA	GATED	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		OPEN-EMITTER	0 Cel	1		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified		TRUE			NO				9.9 mm
TB5D2HDWE4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				3.5 ns	GENERAL PURPOSE		STANDARD	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm		7.5 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	30	250	10.3 mm	.5 V	0 ns
SNJ55LBC172J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	4		BICMOS	MIL-PRF-38535	40 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified		TRUE			YES	e0			19.56 mm	1.1 V	0 ns
7900901CX	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR		25 ns	GENERAL PURPOSE		STANDARD	5 V	5.5 V			IN-LINE		4.5 V			4.5 V	2.54 mm	125 Cel	5 V		-55 Cel	2		DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Qualified					YES		NOT APPLICABLE	NOT APPLICABLE	19.56 mm
SNJ55LBC174FK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	4		BICMOS	MIL-PRF-38535	40 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		CHIP CARRIER	LCC20,.35SQ	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Not Qualified	60 Amp				YES	e0			8.89 mm	1.1 V	0 ns
DS92LV0421SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	100 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V		-40 Cel	24	MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm		6 mm	Not Qualified					YES	e3	30	260	6 mm		0 ns
SNJ55ALS194J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4		BIPOLAR	MIL-PRF-38535	14 ns	EIA-422-B; V.11		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00005 Amp	4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel	1		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	2 V	0 ns
SNJ55114FK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535	20 ns	GENERAL PURPOSE	50 mA	GATED	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	2	TIN LEAD	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Not Qualified	40000 Amp	COMPLEMENTARY		CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES	e0			8.89 mm	1.6 V	0 ns
DS99R124AQSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1			AEC-Q100		I2C	80 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel	18	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm		7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
SCAN928028TUF	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	196	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS		.4 ns	IEEE 1149.1	350 mA	STANDARD	3.3 V		3.3		GRID ARRAY, LOW PROFILE	BGA196,14X14,40		Line Driver or Receivers		3 V	1 mm	85 Cel			-40 Cel	8	TIN LEAD	BOTTOM	S-PBGA-B196	3	1.47 mm		15 mm	Not Qualified					YES	e0	20	220	15 mm		0 ns
DS92LV1021TMSAX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE	55 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	3	2 mm		5.29 mm	Not Qualified					YES	e3	30	260	10.2 mm		0 ns
N8T13D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		25 ns	IBM 360	60 mA	GATED	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		OPEN-EMITTER	0 Cel	1		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified		TRUE			NO				9.9 mm
N8T13N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		25 ns	IBM 360	60 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	1		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		TRUE			NO				19.305 mm
MM78C30W/883	Texas Instruments	LINE DRIVER	MILITARY	FLAT	14	QFF	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	15 V	1		BIMOS	38535Q/M;38534H;883B	400 ns	GENERAL PURPOSE		GATED	12 V		3/15		FLATPACK	FL14,.3		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel	2	TIN LEAD	DUAL	R-GDFP-F14		2.032 mm		6.2865 mm	Not Qualified		COMPLEMENTARY			YES	e0					0 ns
DRV602PW	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	2				GENERAL PURPOSE	20 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.2 mm		4.4 mm	Not Qualified		TRUE	1		NO	e4	30	260	5 mm	6.15 V	0 ns
CLC005AJE-TR13	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1					GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified				OPERATION WITH-5.2V OPTION ALSO AVAILABLE	YES		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		0 ns
LM2512ASN/NOPB	Texas Instruments	LINE DRIVER	OTHER	NO LEAD	40	QCCN	SQUARE	PLASTIC/EPOXY	YES		4						9 mA			2 V	1.8,1.8/3		CHIP CARRIER	LCC40,.24SQ,20	1.6 V	Line Driver or Receivers	.000001 Amp		.5 mm	85 Cel	1.8 V		-30 Cel	4	MATTE TIN	QUAD	S-PQCC-N40	3	.4 mm		6 mm	Not Qualified		TRUE			NO	e3	30	260	6 mm		0 ns
TB5D2HDW	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				3.5 ns	GENERAL PURPOSE	40 mA	STANDARD	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP16,.4	3 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	2.65 mm		7.5 mm	Not Qualified				ALSO OPERATES WITH 5V SUPPLY	YES	e4	NOT SPECIFIED	250	10.3 mm	.5 V	0 ns
SN55LBC172J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	4		BICMOS		40 ns	EIA-485		STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	125 Cel		3-STATE	-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.56 mm
SNJ55114J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR	MIL-PRF-38535	20 ns	GENERAL PURPOSE	50 mA	GATED	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel	5 V		-55 Cel	2	TIN LEAD	DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified	40000 Amp	COMPLEMENTARY		CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES	e0			19.56 mm	1.6 V	0 ns
SN55LVDS31FK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4		CMOS		4.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	125 Cel		3-STATE	-55 Cel	4		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	.247 V	0 ns
SNJ55183WR	Texas Instruments	LINE DRIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535	16 ns	GENERAL PURPOSE	36 mA	GATED	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel	2	TIN LEAD	DUAL	R-GDFP-F14		2.03 mm		6.29 mm	Not Qualified		COMPLEMENTARY			YES	e0			9.21 mm
OPA521IRGWT	Texas Instruments	LINE DRIVER	AUTOMOTIVE	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	24 V	1	1				GENERAL PURPOSE		DIFFERENTIAL	15 V	24 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		7 V			7 V	.65 mm	125 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20	1	1 mm	2.5 A	5 mm						NO	e4	30	260	5 mm
SNJ55LBC174W	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.25 V	4		BICMOS	MIL-PRF-38535	40 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		FLATPACK	FL16,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm		6.73 mm	Not Qualified	60 Amp	COMPLEMENTARY			YES	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm	1.1 V	0 ns
M38510/10406BCB	Texas Instruments	LINE DRIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2			MIL-PRF-38535 Class B	28 ns			DIFFERENTIAL	5 V				FLATPACK					4.5 V		125 Cel			-55 Cel			DUAL	R-CDFP-F14					Not Qualified					YES						28 ns
MM78C29J/883	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	15 V	4			MIL-STD-883	200 ns			GATED	4.5 V				IN-LINE					3 V	2.54 mm	125 Cel			-55 Cel	4		DUAL	R-CDIP-T14		5.08 mm		7.62 mm						NO				19.939 mm
M38510/10405BEX	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.5 V	2				30 ns			DIFFERENTIAL	5 V	5.5 V			IN-LINE		4.5 V			4.5 V		125 Cel	5 V		-55 Cel			DUAL	R-CDIP-T14					Qualified					YES						30 ns
MM88C29J	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	15 V	4				200 ns			GATED	4.5 V				IN-LINE					3 V	2.54 mm	85 Cel			-40 Cel	4		DUAL	R-CDIP-T14		5.08 mm		7.62 mm						NO				19.939 mm
DS92LV0412SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1						95 mA		1.8 V	1.89 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers			.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm	Not Qualified		TRUE	1		NO	e3	30	260	7 mm		0 ns
DS99R101VSX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES								95 mA		3.3 V		3.3		FLATPACK	TQFP48,.35SQ		Line Driver or Receivers			.5 mm	70 Cel			0 Cel		MATTE TIN	QUAD	S-PQFP-G48	3				Not Qualified						e3	30	260			0 ns
SNJ55110AFK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535	15 ns	V.35	35 mA	GATED	5 V	5.5 V	+-5	-5 V	CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel	5 V	CONSTANT-CURRENT	-55 Cel	2	Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Not Qualified				HIGH DRIVE	YES	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm	2 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.