LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
TSER953RHBT	Texas Instruments	LINE DRIVER	OTHER	NO LEAD	32	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.89 V	4						225 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			.00002 Amp	1.71 V	.5 mm	85 Cel			-20 Cel	4	MATTE TIN	QUAD	S-PQCC-N32	3	1 mm		5 mm					YES	e3	30	260	5 mm	2.68 V
SN55LVDS31J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	3.6 V	4		CMOS		4.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	3 V	2.54 mm	125 Cel		3-STATE	-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified				YES		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	.247 V	0 ns
DS92LV1021TMSA/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE	55 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	3	2 mm		5.3 mm	Not Qualified				YES	e3	30	260	10.2 mm		0 ns
DS3487M/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES		4		BIPOLAR		15 ns	EIA-422		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel		3-STATE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified				YES	e3	30	260	9.9 mm	2 V	0 ns
DS7831J/883	Texas Instruments	LINE DRIVER	MILITARY			DIP					5.5 V	2			MIL-STD-883	25 ns	GENERAL PURPOSE		GATED	5 V									4.5 V	2.54 mm	125 Cel			-55 Cel	2					5.08 mm		7.62 mm	Not Qualified			LG_MAX	YES				19.94 mm
DS8830DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V				SMALL OUTLINE					4.75 V		70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-PDSO-G14					Not Qualified		COMPLEMENTARY		YES						0 ns
DS8830N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers	.00012 Amp	4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		YES		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	1.3 V	0 ns
DS8830D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00012 Amp	4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-PDSO-G14					Not Qualified		COMPLEMENTARY		YES		NOT SPECIFIED	NOT SPECIFIED		1.4 V	0 ns
DS7831J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO	5.5 V	2		BIPOLAR		25 ns	GENERAL PURPOSE		GATED	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel	2		DUAL	R-XDIP-T16		5.08 mm		7.62 mm	Not Qualified			LG_MAX	YES		NOT SPECIFIED	NOT SPECIFIED	19.94 mm	2 V	0 ns
DS8830N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	1		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		YES				19.305 mm		0 ns
DS8830N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	1		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		YES				19.305 mm		0 ns
DS7831W/883	Texas Instruments	LINE DRIVER	MILITARY			DFP					5.5 V	2			MIL-STD-883	25 ns	GENERAL PURPOSE		GATED	5 V									4.5 V		125 Cel			-55 Cel	2								Not Qualified				YES
DS8832J	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO	5.25 V	2		BIPOLAR		25 ns	GENERAL PURPOSE		GATED	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-XDIP-T16		5.08 mm		7.62 mm	Not Qualified			LG_MAX	YES		NOT SPECIFIED	NOT SPECIFIED	19.94 mm	2 V	0 ns
DS7830J/883	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	2			MIL-STD-883	16 ns	GENERAL PURPOSE		GATED	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	2		DUAL	R-GDIP-T14		5.08 mm		7.62 mm				LG-MAX	YES				19.939 mm
DS7832W	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC	YES				BIPOLAR		25 ns				5 V		5		FLATPACK	FL16,.3		Line Driver or Receivers	.00004 Amp		1.27 mm	125 Cel		3-STATE	-55 Cel	2		DUAL	R-XDFP-F16					Not Qualified				YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
DS8831N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		25 ns	GENERAL PURPOSE		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified			CONFIGURABLE INTERFACE STANDARDS; INDIVIDUAL ENABLES	YES		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	2 V	0 ns
DS7832J/883B	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR	MIL-STD-883 Class B (Modified)	25 ns	GENERAL PURPOSE		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel	1		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified			CONFIGURABLE INTERFACE STANDARDS; INDIVIDUAL ENABLES	YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
DS8830D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	1		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		YES				8.65 mm		0 ns
DS7830W/883	Texas Instruments	LINE DRIVER	MILITARY	FLAT	14	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES		2		BIPOLAR	MIL-STD-883	16 ns	GENERAL PURPOSE		GATED	5 V		5		FLATPACK	FL14,.3		Line Driver or Receivers	.00012 Amp		1.27 mm	125 Cel		TOTEM-POLE	-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F14		2.032 mm		6.35 mm	Not Qualified		COMPLEMENTARY		YES	e0				1.3 V	0 ns
DS7832J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO				BIPOLAR		25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	125 Cel		3-STATE	-55 Cel	2		DUAL	R-XDIP-T16					Not Qualified				YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
DS90LV027ATMX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	2		CMOS		1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified				YES	e0	20	235	4.9 mm	.25 V	0 ns
5962-8864801EA	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	4		BIPOLAR	MIL-STD-883	22 ns	GENERAL PURPOSE		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel	1	TIN LEAD	DUAL	R-GDIP-T16					Not Qualified				YES	e0				2 V	0 ns
5962-9163901QEX	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	4		BICMOS	MIL-PRF-38535 Class Q	12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V	5.5 V			IN-LINE		4.5 V			4.5 V	2.54 mm	125 Cel	5 V		-55 Cel	4	TIN LEAD	DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Qualified				YES	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm
DS26F31MJ/883	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO		4		BIPOLAR	MIL-STD-883	25 ns	EIA-422; FED STD 1020		STANDARD					IN-LINE						2.54 mm	125 Cel			-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified			LG_MAX; SEATED HGT-NOM	YES				19.94 mm
5962F7802301VEA	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	300k Rad(Si)	CERAMIC, GLASS-SEALED	NO	5.5 V	4			MIL-PRF-38535 Class V	30 ns	EIA-422; FED STD 1020		STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified			LG_MAX; SEATED HGT-NOM	YES				19.94 mm
AM26LV31CNSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	.1 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.3	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel	3.3 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified		COMPLEMENTARY	BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	10.2 mm	.95 V	0 ns
SN75LVDS84DGGR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	100 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm		6.1 mm	Not Qualified		TRUE		YES	e4	30	260	12.5 mm		0 ns
THS6132RGW	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	16 V	2					GENERAL PURPOSE		STANDARD	5 V	16 V	+-5/+-15	-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.20SQ,25	3.3 V	Line Driver or Receivers		3.3 V	.65 mm	85 Cel	15 V		-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20		1 mm		5 mm	Not Qualified				NO	e4			5 mm		0 ns
SN75LVDS81DGGR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		13.38 ns	EIA-644	110 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel	7		DUAL	R-PDSO-G56		1.2 mm		6.1 mm	Not Qualified				YES		NOT SPECIFIED	NOT SPECIFIED	14 mm		0 ns
SN65LVDS31NS	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4				2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified				YES	e4	30	260	10.2 mm
SN75ALS130N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.95 V	4		BIPOLAR		34 ns	IBM 360/370		GATED	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.5 V	2.54 mm	70 Cel			0 Cel	4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified				NO		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	2.96 V	0 ns
DS26LS31MW-SMD	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4			MIL-STD-883	30 ns	EIA-422; FED STD 1020		STANDARD	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel			-55 Cel	4		DUAL	R-GDFP-F16		2.032 mm		6.73 mm				LG_MAX	YES				10.16 mm
DS90CR287SLC	Texas Instruments	LINE DRIVER	COMMERCIAL	BALL	64	LFBGA	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1		CMOS		1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V				GRID ARRAY, LOW PROFILE, FINE PITCH					3 V	.8 mm	70 Cel			-10 Cel	4		BOTTOM	S-PBGA-B64	3	1.5 mm		8 mm	Not Qualified				YES		20	235	8 mm
SN75110ANSRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		15 ns	V.35		GATED	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.3		Line Driver or Receivers	.00008 Amp	4.75 V	1.27 mm	70 Cel		CONSTANT-CURRENT	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified				YES	e4	30	260	10.2 mm		0 ns
5962-9076502VEA	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, METAL-SEALED COFIRED	NO	5.5 V	4		BIPOLAR	MIL-STD-883	25 ns	EIA-485; EIA-422	50 mA		5 V	5.5 V			IN-LINE		4.5 V			4.5 V	2.54 mm	125 Cel	5 V		-55 Cel	4	TIN LEAD	DUAL	R-CDIP-T16	1	5.08 mm		7.62 mm	Qualified				YES	e0			19.94 mm
SN75174N3	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		65 ns	V.11; X.27; EIA-422-A; EIA-485	60 mA	STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		YES		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	1.5 V	0 ns
DS90CR215MTD/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644	55 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G48	2	1.1 mm		6.1 mm	Not Qualified		COMPLEMENTARY		YES	e3	30	260	12.5 mm		0 ns
SN75150D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	13.2 V	1		BIPOLAR			EIA-232-C	22 mA	STANDARD	12 V			-12 V	SMALL OUTLINE					10.8 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified		INVERTED	PROGRAMMABLE SLEW RATE	NO				4.9 mm		0 ns
THS6204IRHFR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR		PLASTIC/EPOXY	YES	28 V	1	2	BIPOLAR			GENERAL PURPOSE	22 mA	DIFFERENTIAL	12 V	14 V	+-6/+-12	-6 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20	5 V	Line Driver or Receivers		10 V	.5 mm	85 Cel	6 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N24	2	1 mm	.416 A	4 mm	Not Qualified		COMPLEMENTARY		NO	e4	30	260	5 mm		0 ns
THS6053CD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified			ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
SN75130N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.95 V	1		BIPOLAR		37 ns	IBM 360/370	85 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY	TOTEM-POLE INVERTED OUTPUT; COMMON FAULT FLAG	NO				19.305 mm		0 ns
SN75188DG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	4		BIPOLAR		350 ns	EIA-232-E; TIA-232-E; V.28		GATED	9 V		+-9	-9 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00001 Amp	7.5 V	1.27 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified			1 SINGLE INPUT DRIVER	NO	e4	30	260	8.65 mm	12 V	0 ns
SN75121NE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		50 ns	GENERAL PURPOSE		GATED	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified				NO	e4			19.305 mm	2.4 V	0 ns
SN75LBC174N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4		BICMOS		20 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified	.06 Amp	COMPLEMENTARY		YES	e4			19.305 mm	1.5 V	0 ns
SN75LVDS9638DGKRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	2		CMOS		6 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	70 Cel		3-STATE	0 Cel	2		DUAL	S-PDSO-G8		1.1 mm		3 mm	Not Qualified				YES		NOT SPECIFIED	NOT SPECIFIED	3 mm	.247 V	0 ns
SN75C198N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	15 V	1		BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V			-12 V	IN-LINE					4.5 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED	2 SINGLE INPUT DRIVERS	NO				19.305 mm
SN65C188D-00	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	1		BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V			-12 V	SMALL OUTLINE					4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	4		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		INVERTED	1 SINGLE INPUT DRIVER	NO				8.65 mm
SN75126J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.95 V	2		BIPOLAR		37 ns	IBM 360/370	80 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	2		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified		TRUE	INDIVIDUAL FAULT FLAGS	NO				19.56 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.