LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75159NS	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		20 ns	V.11; EIA-422-B		GATED	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified					YES	e4			10.2 mm
LMH0356SQ-40	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE		UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.135 V	.4 mm	85 Cel			-40 Cel	1		QUAD	S-XQCC-N40		.8 mm		5 mm	Not Qualified					YES				5 mm
5962-9865101QFA	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	3.6 V	4		CMOS	MIL-PRF-38535 Class Q	3.5 ns	EIA-644; TIA-644; IEEE P1596.3		STANDARD	3.3 V	3.6 V			FLATPACK		3 V			3 V	1.27 mm	125 Cel	3.3 V		-55 Cel	4	TIN LEAD	DUAL	R-GDFP-F16	1	2.032 mm		6.35 mm	Qualified				LG-MAX	YES	e0			9.906 mm
LMH0307GR	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	25	TFBGA	SQUARE		PLASTIC/EPOXY	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3		GRID ARRAY, THIN PROFILE, FINE PITCH	BGA25,5X5,20		Line Driver or Receivers		3.135 V	.5 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B25		1.1 mm		3 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	3 mm	.72 V	0 ns
5962R9583301VFX	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	100k Rad(Si)	CERAMIC, GLASS-SEALED	YES	5.5 V	4		CMOS	MIL-PRF-38535 Class V	5 ns	IEEE 1596.3		STANDARD	5 V	5.5 V			FLATPACK		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		DUAL	R-GDFP-F16		2.032 mm		6.35 mm	Qualified					YES
DS90UB301QSQE/NOPB	Texas Instruments	LINE DRIVER																																		NICKEL PALLADIUM GOLD			3										e4	30	260
LMH0040SQ	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm		7 mm	Not Qualified					NO	e0	30	235	7 mm
SN75C188DBLE	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	4		BIMOS		3500 ns	EIA-232-E; TIA-232-E; V.28	.16 mA	STANDARD	12 V		+-12	-12 V	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4		DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	8 V	0 ns
AM26C31MJB	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	4		BICMOS	38535Q/M;38534H;883B	12 ns	EIA-422-B; TIA-422-B; V.11	3.2 mA	STANDARD	4 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	2.54 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified	20000 Amp	TRUE			YES	e0			19.56 mm	2 V	0 ns
5962-8864801FA	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	22 ns	GENERAL PURPOSE		STANDARD	5 V		5		FLATPACK	FL16,.25		Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	125 Cel		3-STATE	-55 Cel	1	TIN LEAD	DUAL	R-GDFP-F16					Not Qualified					YES	e0				2 V	0 ns
DS90CR215MTDX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644	55 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G48	2	1.1 mm		6.1 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	12.5 mm		0 ns
DS3691MWC	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD		DIE	UNSPECIFIED		UNSPECIFIED	YES	5.25 V	2		BIPOLAR		300 ns	EIA-423; EIA-442		STANDARD	5 V			-5 V	UNCASED CHIP					4.75 V		70 Cel			0 Cel	2		UPPER	X-XUUC-N					Not Qualified				CONFIGURABLE INTERFACE STANDARDS	YES
LMH0340SQE	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm		7 mm	Not Qualified					NO	e0	30	235	7 mm
MC3487J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	4		BIPOLAR		20 ns	EIA-422-A; FED STD 1020	85 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.56 mm
SN75158PSRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE	SOP8,.3		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	6.2 mm	2 V	0 ns
DS3691M	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		300 ns	EIA-423; EIA-442		STANDARD	5 V		5/+-5	-5 V	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified				CAN ALSO BE USED AS SINGLE ENDED DRIVER; CONFIGURABLE INTERFACE STANDARDS	YES	e0	20	235	9.9 mm	2 V	0 ns
5962-9076501M2X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	25 ns	EIA-422; EIA-485		STANDARD	5 V	5.25 V			CHIP CARRIER		4.75 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20		1.905 mm		8.89 mm	Qualified					YES				8.89 mm
AM26C31QN	Texas Instruments	LINE DRIVER	AUTOMOTIVE	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.000001 Amp	4.5 V	2.54 mm	125 Cel		3-STATE	-40 Cel	4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified					YES				19.305 mm	2 V	0 ns
THS6212IRHFR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR		PLASTIC/EPOXY	YES	14 V	2	1				GENERAL PURPOSE		DIFFERENTIAL	6 V	14 V		-6 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		5 V			5 V	.5 mm	85 Cel	6 V		-40 Cel	2	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	QUAD	R-PQCC-N24	2	1 mm	.665 A	4 mm						NO	e4	NOT SPECIFIED	260	5 mm
THS6212IRHFT	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR		PLASTIC/EPOXY	YES	14 V	2	1				GENERAL PURPOSE		DIFFERENTIAL	6 V	14 V		-6 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		5 V			5 V	.5 mm	85 Cel	6 V		-40 Cel	2	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	QUAD	R-PQCC-N24	2	1 mm	.665 A	4 mm						NO	e4	NOT SPECIFIED	260	5 mm
AM26C31MJ	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3.2 mA	STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.000001 Amp	4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.56 mm	2 V	0 ns
SN75LVCP412RTJR	Texas Instruments	LINE DRIVER	OTHER	NO LEAD	20	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	2	2			.4 ns	GENERAL PURPOSE	70 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V		.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N20	2	.8 mm		4 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4 mm		0 ns
SN75158PSLE	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	50 mA	STANDARD	5 V		5		SMALL OUTLINE	SOP8,.3		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	1		DUAL	R-PDSO-G8		2 mm		5.3 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	2 V	0 ns
SN75183N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	1		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm		0 ns
SN75109AN	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		15 ns	GENERAL PURPOSE	30 mA	GATED	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	19.305 mm		0 ns
THS6052ID	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	16.5 V	2	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V	+-5/+-15	-12 V	SMALL OUTLINE	SOP8,.25	5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	12 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	.175 A	3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	4.9 mm		0 ns
DS90UR241IVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE		PLASTIC/EPOXY	YES		1		CMOS	AEC-Q100			90 mA		3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm		7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7 mm	2 V	0 ns
DS26LS31ME-SMD	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-PRF-38535 Class Q	30 ns	EIA-422; FED STD 1020	60 mA	STANDARD	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	QUAD	S-CQCC-N20	1	1.91 mm		8.89 mm	Not Qualified					YES	e0			8.89 mm	2 V	0 ns
SN75LVDS9638DGKR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	2		CMOS		6 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	70 Cel		3-STATE	0 Cel	2		DUAL	S-PDSO-G8		1.07 mm		3 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	3 mm	.247 V	0 ns
LT1030CDE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	4		BIPOLAR			EIA-232-F; TIA-232-F		STANDARD	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00002 Amp	5 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.75 mm		3.9 mm	Not Qualified		INVERTED			NO	e4	30	260	8.65 mm	3.3 V	0 ns
DS96174CN/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO		4		BIPOLAR		25 ns	EIA-422-A; EIA-485		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	4	MATTE TIN	DUAL	R-PDIP-T16	1	5.08 mm		7.62 mm	Not Qualified					YES	e3			19.304 mm	1.5 V	0 ns
LMH0307GRE	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	25	TFBGA	SQUARE		PLASTIC/EPOXY	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				GRID ARRAY, THIN PROFILE, FINE PITCH					3.135 V	.5 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B25		1.1 mm		3 mm						YES		NOT SPECIFIED	NOT SPECIFIED	3 mm
SN75174N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		65 ns	V.11; X.27; EIA-422-A; EIA-485	60 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm
DS90CR485VSX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE		PLASTIC/EPOXY	YES	2.62 V	8					EIA-644; TIA-644		STANDARD	2.5 V	3.46 V	2.5,2.5/3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	2.37 V	Line Driver or Receivers		2.37 V	.5 mm	70 Cel	2.5 V		-10 Cel	9	TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm		14 mm	Not Qualified					YES	e0		260	14 mm		0 ns
SN75ALS174AN-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		22 ns	V.11; X.27; EIA-422-A; EIA-485	55 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm
SN65C188DB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	1		BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V		+-12	-12 V	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	4		DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	8 V	0 ns
THS6052IDDAR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HLSOP	RECTANGULAR		PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
THS6052IDG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V	+-5/+-15	-12 V	SMALL OUTLINE	SOP8,.25	5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	12 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	30	260	4.9 mm		0 ns
DS90CR281MTD	Texas Instruments	LINE DRIVER		GULL WING	56	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4						53 mA		5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20				4.5 V	.5 mm	70 Cel			-10 Cel	4		DUAL	R-PDSO-G56		1.1 mm		6.1 mm		2 Amp				YES				14 mm	.25 V
DS90LV027AMWC	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		DIE	UNSPECIFIED		UNSPECIFIED	YES	3.6 V	2		CMOS		1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V				UNCASED CHIP					3 V		85 Cel			-40 Cel	2		UPPER	X-XUUC-N					Not Qualified					YES
SN65LVDS31QPWRQ1	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS	AEC-Q100	2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	125 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G16		1.2 mm		4.4 mm	Not Qualified					YES				5 mm	.247 V	0 ns
LMH0303SQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE		UNSPECIFIED	YES	3.465 V	1							DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.135 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N16	2	.8 mm		4 mm						YES	e0	30	235	4 mm
SN75LVDS83CDGGR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES		1					GENERAL PURPOSE			3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH						.5 mm	70 Cel			0 Cel			DUAL	R-PDSO-G56		1.2 mm		6.1 mm	Not Qualified									14 mm
SN65C198D-00	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	1		BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V			-12 V	SMALL OUTLINE					4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		INVERTED		2 SINGLE INPUT DRIVERS	NO				8.65 mm
SN75ALS194NP3	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO		4		TTL		14 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00005 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16										YES					2 V
5962-9163901M2X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		CMOS	MIL-STD-883	14 ns	EIA-422		STANDARD	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20		1.905 mm		8.89 mm	Qualified					YES				8.89 mm
5962-9583301VFA	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4		CMOS	MIL-PRF-38535 Class V	5 ns	IEEE 1596.3		STANDARD	5 V	5.5 V			FLATPACK		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4	TIN LEAD	DUAL	R-GDFP-F16	1	2.032 mm		6.35 mm	Qualified				LG_MAX	YES	e0			9.906 mm
THS6182DWG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	2					GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		5 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified				ALSO OPERATES WITH 24V SINGLE SUPPLY	NO	e4	30	260	12.8 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.