LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS90UH947NTRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.155 V	2			AEC-Q100			469 mA		1.1 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20				1.045 V	.5 mm	105 Cel		DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm			COMPLEMENTARY			YES	e4	30	260	9 mm	.9 V
SN75LVCP412RTJT	Texas Instruments	LINE DRIVER	OTHER	NO LEAD	20	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	2	2			.4 ns	GENERAL PURPOSE	70 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V		.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N20	2	.8 mm		4 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4 mm		0 ns
DS90UR910QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm		6 mm				1		YES	e3	30	260	6 mm
SN75113D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		30 ns	GENERAL PURPOSE	65 mA	GATED	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		1 SINGLE INPUT DRIVER	YES		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	1.6 V	0 ns
SN65LBC172AN	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers		4.75 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		TRUE			YES	e4			19.305 mm	1 V	0 ns
SN65MLVD047D	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.4 ns	EIA-899; TIA-899	70 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		TRUE			YES	e4	30	260	9.9 mm	.48 V	0 ns
5962-88744022A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-STD-883	20 ns	GENERAL PURPOSE	50 mA	GATED	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	2	TIN LEAD	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified	40000 Amp			CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES	e0			8.89 mm	2 V	0 ns
SN65C198DB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	1		BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V		+-5/+-12	-12 V	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	8 V	0 ns
UA9636ACDG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	13.2 V	2		BIPOLAR		140000 ns	EIA-232-E; TIA-232-E; V.10; V.28; EIA-423-B; TIA-423-B	18 mA	STANDARD	12 V	13.2 V	+-12	-12 V	SMALL OUTLINE	SOP8,.25	10.8 V	Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel	12 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified				PROGRAMMABLE SLEW RATE	NO	e4	NOT SPECIFIED	260	4.9 mm	8 V	0 ns
THS6204IRHFRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR		PLASTIC/EPOXY	YES	28 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-6/+-12		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20		Line Driver or Receivers		10 V	.5 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N24	2	1 mm		4 mm	Not Qualified					NO	e4	30	260	5 mm		0 ns
SN75ALS191PSE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		TTL		7 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	6.2 mm
DS90CF583MTD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES		5		CMOS			EIA-644; TIA-644	45 mA	STANDARD	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers			.5 mm	70 Cel			-10 Cel	5	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G56	2	1.2 mm		6.1 mm	Not Qualified					YES	e0	30	235	14 mm		0 ns
DS9638CMX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES		2		BIPOLAR		20 ns	EIA-422		STANDARD	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000025 Amp		1.27 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e0	20	235	4.9 mm	2 V	0 ns
SN75112J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	1		BIPOLAR		15 ns	GENERAL PURPOSE	40 mA	GATED	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2		DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		HIGH DRIVE	YES				19.56 mm
SN75ALS174ADWG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		22 ns	EIA-422-B; TIA-442-B; EIA-485	55 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
DS90CR483VJD/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	8		CMOS		51.69 ns	EIA-644; TIA-644	210 mA	STANDARD	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel	8	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G100	3	1.2 mm		14 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	14 mm	2.7 V	97.4 ns
DS91M047TMA	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4				5 ns	EIA-899; TIA-899		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.000015 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G16		1.753 mm		3.899 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	9.902 mm	.48 V	0 ns
THS6204IRHFTG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR		PLASTIC/EPOXY	YES	28 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-6/+-12		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20		Line Driver or Receivers		10 V	.5 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N24	2	1 mm		4 mm	Not Qualified					NO	e4	30	260	5 mm		0 ns
V62/07627-01XE	Texas Instruments	LINE DRIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.7 V	4				4.5 ns	EIA-644; TIA-644; EIA-422-B; TIA-422-B		STANDARD	3.3 V	3.6 V			SMALL OUTLINE		3 V			4 V	1.27 mm	125 Cel	3.3 V		-55 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm						YES	e4	30	260	9.9 mm
UA9636ACP	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	13.2 V	1		BIPOLAR		140000 ns	EIA-232-E; V.10; V.28; EIA-423-B	18 mA	STANDARD	12 V	13.2 V	+-12	-12 V	IN-LINE	DIP8,.3	10.8 V	Line Driver or Receivers	.00001 Amp	10.8 V	2.54 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	8 V	0 ns
DS90CR483VJDX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	8		CMOS		51.69 ns	EIA-644; TIA-644	210 mA	STANDARD	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel	8	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G100	3	1.2 mm		14 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	14 mm	2.7 V	97.4 ns
THS6043IPWPG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	HTSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V		-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		5 V			5 V	.65 mm	85 Cel	12 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm		4.4 mm	Not Qualified		COMPLEMENTARY		ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e4	30	260	5 mm		0 ns
5962-88744012X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-STD-883	20 ns	GENERAL PURPOSE		GATED	5 V	5.25 V			CHIP CARRIER		4.75 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	2		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified				1 SINGLE INPUT DRIVER	YES				8.89 mm
SN75ALS130N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.95 V	1		BIPOLAR		28 ns	IBM 360/370	47 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		TOTEM-POLE INVERTED OUTPUT; COMMON FAULT FLAG	NO				19.305 mm
SN75159NE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		25 ns	EIA-422-B; TIA-422-B; V.11		GATED	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified					YES	e4			19.305 mm	2 V	0 ns
SN74ALS1631N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	1		BIPOLAR		16 ns	EIA-422-A	45 mA	STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.5 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	2.25 V	0 ns
SN65LV1023DB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		CMOS		.4 ns	GENERAL PURPOSE	70 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm		0 ns
SN75ALS192NSRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		14 ns	EIA-422-B; TIA-422-B; V.11	45 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	10.2 mm	2 V	0 ns
SN75ALS194NSE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4				14 ns	V.11; EIA-422-B		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm
SN65LVDS305ZQE	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE		PLASTIC/EPOXY	YES	1.95 V	1		CMOS			GENERAL PURPOSE	18.8 mA	STANDARD	1.8 V		1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20		Line Driver or Receivers		1.65 V	.5 mm	85 Cel			-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B80		1 mm		5 mm	Not Qualified					YES	e1			5 mm		0 ns
DS26LS31MEFQML	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	300k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4			MIL-PRF-38535 Class Q	30 ns	EIA-422; FED STD 1020		STANDARD	5 V				CHIP CARRIER					4.5 V	1.27 mm	125 Cel			-55 Cel	4		QUAD	S-CQCC-N20		1.91 mm		8.89 mm	Not Qualified					YES				8.89 mm
DS90UR905QSQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		UNSPECIFIED	YES	1.89 V	1					I2C		DIFFERENTIAL	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.71 V	.5 mm	105 Cel			-40 Cel	1		QUAD	S-XQCC-N48		.8 mm		7 mm	Not Qualified			1		YES				7 mm
DS89C387TMEA/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES				CMOS		11 ns				5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		Line Driver or Receivers	.000001 Amp		.635 mm	85 Cel		3-STATE	-40 Cel	12	MATTE TIN	DUAL	R-PDSO-G48	2A				Not Qualified					YES	e3	30	260		2 V	0 ns
SN75183D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	1		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES				8.65 mm		0 ns
THS6053IPWP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	16.5 V	2	2	BIPOLAR			GENERAL PURPOSE	8 mA	DIFFERENTIAL	12 V	15 V	+-5/+-15	-12 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	5 V	Line Driver or Receivers		4.5 V	.65 mm	85 Cel	12 V	DIFFERENTIAL	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.2 mm	.175 A	4.4 mm	Not Qualified		COMPLEMENTARY		ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm		0 ns
DS26LS31MJFQML	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	300k Rad(Si)	CERAMIC, GLASS-SEALED	NO	5.5 V	4			MIL-STD-883	30 ns	EIA-422; FED STD 1020		STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified				LG_MAX; SEATED HGT-NOM	YES				19.94 mm
SN65LVDS31QPWQ1	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS	AEC-Q100	2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	125 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G16		1.2 mm		4.4 mm	Not Qualified					YES				5 mm	.247 V	0 ns
5962-9076503QEX	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	4		BICMOS	MIL-PRF-38535 Class Q	40 ns	EIA-485		STANDARD	5 V	5.25 V			IN-LINE		4.75 V			4.75 V	2.54 mm	125 Cel	5 V		-55 Cel	4	TIN LEAD	DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Qualified					YES	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm
THS6092CDR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	7 V	2					GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		0 ns
SN65LVDS301ZXHR	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE		PLASTIC/EPOXY	YES	1.95 V	3							STANDARD	1.8 V				GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20				1.65 V	.5 mm	85 Cel			-40 Cel	3	TIN SILVER COPPER	BOTTOM	S-PBGA-B80	3	1 mm		5 mm						YES	e1	30	260	5 mm
DS90CR483AVJD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1					EIA-644; TIA-644			3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			-10 Cel	8	TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm		14 mm	Not Qualified					YES	e0			14 mm
SN75110AJ-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	1		BIPOLAR		15 ns	GENERAL PURPOSE	35 mA	GATED	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2		DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		HIGH DRIVE	YES				19.56 mm		0 ns
SN65ALS174ADW-00	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		22 ns	V.11; X.27; EIA-422-A; EIA-485	55 mA	STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	2		DUAL	R-PDSO-G20		2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES				12.8 mm
UA9636ACDRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	13.2 V	2		BIPOLAR		140000 ns	EIA-232-E; TIA-232-E; V.10; V.28; EIA-423-B; TIA-423-B		STANDARD	12 V		+-12	-12 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified				PROGRAMMABLE SLEW RATE	NO	e4	30	260	4.9 mm	8 V	0 ns
DS26F31MW/883	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES		4		BIPOLAR	MIL-STD-883	25 ns	EIA-422; FED STD 1020	40 mA	STANDARD	5 V	5.5 V	5		FLATPACK	FL16,.3	4.5 V	Line Driver or Receivers	.00002 Amp		1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	DUAL	R-GDFP-F16	1	2.032 mm		6.73 mm	Not Qualified	.02 Amp	COMPLEMENTARY		LG_MAX	YES	e0			10.16 mm	2 V	0 ns
SN75188D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	4		BIPOLAR		350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	SMALL OUTLINE	SOP14,.25	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	1.27 mm	70 Cel	9 V	TOTEM-POLE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO	e4	NOT SPECIFIED	260	8.65 mm	12 V	0 ns
5962-9583301VFX	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4		CMOS	MIL-PRF-38535 Class V	5 ns	IEEE 1596.3		STANDARD	5 V	5.5 V			FLATPACK		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		DUAL	R-GDFP-F16		2.032 mm		6.35 mm	Qualified					YES
DS26LS31ME/883	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4			MIL-STD-883	15 ns	EIA-422; FED STD 1020		STANDARD	5 V				CHIP CARRIER					4.5 V	1.27 mm	125 Cel			-55 Cel	4		QUAD	S-CQCC-N20		1.905 mm		8.89 mm	Not Qualified					YES				8.89 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.