LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75ALS191PS	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		TTL		7 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	6.2 mm
DS90CR287MTDX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		CMOS		1.5 ns	EIA-644; TIA-644	60 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	4	TIN LEAD	DUAL	R-PDSO-G56	2	1.2 mm		6.1 mm	Not Qualified					YES	e0	20	235	14 mm		0 ns
SN75ALS172ADW	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		22 ns	EIA-422-B; TIA-422-B; EIA-485; V.11	55 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified	.06 Amp	COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
5962-9076504Q2X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	4		BICMOS	MIL-PRF-38535 Class Q	40 ns	EIA-485		STANDARD	5 V	5.25 V			CHIP CARRIER		4.75 V			4.75 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified					YES				8.89 mm
DS90C383BMTX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	50 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	4	TIN LEAD	DUAL	R-PDSO-G56	2	1.1 mm		6.1 mm	Not Qualified					YES	e0	20	235	14 mm		0 ns
SN75188J	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	15 V	1		BIPOLAR		175 ns	EIA-232-C	34 mA	GATED	9 V		+-9	-9 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp	7.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	4		DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER; PROGRAMMABLE SLEW RATE	NO		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	12 V	0 ns
DS90CR485VS	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE		PLASTIC/EPOXY	YES	2.62 V	8					EIA-644; TIA-644		STANDARD	2.5 V	3.46 V	2.5,2.5/3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	2.37 V	Line Driver or Receivers		2.37 V	.5 mm	70 Cel	2.5 V		-10 Cel	9	TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm		14 mm	Not Qualified					YES	e0		260	14 mm		0 ns
DS90LV031AW-QML	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	3.6 V	4		CMOS	MIL-PRF-38535 Class Q	3.5 ns	EIA-644; TIA-644; IEEE P1596.3	35 mA	STANDARD	3.3 V	3.6 V	3.3		FLATPACK	FL16,.3	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	125 Cel	3.3 V	3-STATE	-55 Cel	4	TIN LEAD	DUAL	R-GDFP-F16	1	2.032 mm		6.35 mm	Not Qualified		TRUE			YES	e0			9.906 mm	.25 V	0 ns
DS96F174CJ	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	4		BIPOLAR		16 ns	EIA-422; EIA-485		STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm					LG-MAX	YES				19.94 mm
THS6182DWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	2					GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G20		2.65 mm		7.5 mm	Not Qualified				ALSO OPERATES WITH 24V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	12.8 mm		0 ns
DS90UB901QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE		PLASTIC/EPOXY	YES		1			AEC-Q100			90 mA			1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm		5 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	5 mm		0 ns
5962-86889012X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	15 V	4		BIPOLAR	MIL-STD-883	175 ns	EIA-232-E; TIA-232-E; V.28		GATED	9 V	15 V		-9 V	CHIP CARRIER		7.5 V			7.5 V	1.27 mm	125 Cel	9 V		-55 Cel	4		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified					NO				8.89 mm
5962-8874402EA	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR	MIL-STD-883	20 ns	GENERAL PURPOSE	50 mA	GATED	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel	5 V		-55 Cel	2	TIN LEAD	DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Qualified	40000 Amp			CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES	e0			19.56 mm	2 V	0 ns
DS90CR213MTD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4					EIA-644; TIA-644		STANDARD	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.5 mm	70 Cel			-10 Cel	4		DUAL	R-PDSO-G48		1.1 mm		6.1 mm						YES				12.5 mm
5962-9076504QDX	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.25 V	4		BICMOS	MIL-PRF-38535 Class Q	40 ns	EIA-485		STANDARD	5 V	5.25 V			FLATPACK		4.75 V			4.75 V		125 Cel	5 V		-55 Cel	4		DUAL	R-GDFP-F16					Not Qualified					YES
5962-9583301Q2A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		CMOS	MIL-PRF-38535 Class Q	5 ns	IEEE 1596.3		STANDARD	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20	1	1.91 mm		8.89 mm	Qualified					YES				8.89 mm
THS6052IDDARG3	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HLSOP	RECTANGULAR		PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
THS6043CDR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE					5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
SN75121D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		50 ns	GENERAL PURPOSE		GATED	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		OPEN-EMITTER	0 Cel	2		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	2.4 V	0 ns
DS90LV027AMDC	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		DIE	UNSPECIFIED		UNSPECIFIED	YES	3.6 V	2		CMOS		1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V				UNCASED CHIP					3 V		85 Cel			-40 Cel	2		UPPER	X-XUUC-N					Not Qualified					YES
SN65LVDS151DARG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	32	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		CMOS		5.8 ns	EIA-644-A; TIA-644-A	65 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP32,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G32	2	1.2 mm		6.2 mm	Not Qualified					YES	e4	30	260	11 mm		0 ns
SN75LVDS9638DG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	2		CMOS		6 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	70 Cel		3-STATE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e4	30	260	4.9 mm	.247 V	0 ns
THS6032CVFPRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	32	HLQFP	SQUARE		PLASTIC/EPOXY	YES	16 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V	16 V		-5 V	FLATPACK, HEAT SINK/SLUG, LOW PROFILE		5 V			3 V	.8 mm	70 Cel	15 V		0 Cel	2		QUAD	S-PQFP-G32		1.6 mm		7 mm	Not Qualified				ALSO REQUIRES -5V TO -16V SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	7 mm		0 ns
SN75114J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	1		BIPOLAR		30 ns	GENERAL PURPOSE	50 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	2		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES				19.56 mm		0 ns
DS14C88MWC	Texas Instruments	LINE DRIVER	COMMERCIAL EXTENDED	NO LEAD		DIE	UNSPECIFIED		UNSPECIFIED	YES	12.6 V	4		CMOS		6000 ns	EIA-232-D; V.28		GATED	9 V			-9 V	UNCASED CHIP					4.5 V		75 Cel			0 Cel	4		UPPER	X-XUUC-N					Not Qualified				1 SINGLE INPUT DRIVER	NO
SN75188N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	15 V	1		BIPOLAR		175 ns	EIA-232-C	34 mA	GATED	9 V			-9 V	IN-LINE					7.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	4		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER; PROGRAMMABLE SLEW RATE	NO				19.305 mm		0 ns
DS90LV017M	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1				6 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE	SOP8,.24				3 V	1.27 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm			TRUE			YES				4.9 mm
LMH0002SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers		3.135 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	1	.8 mm		4 mm	Not Qualified					YES	e3	30	260	4 mm	.75 V	0 ns
LMH0307SQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE		UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.135 V	.65 mm	85 Cel			-40 Cel	1		QUAD	S-XQCC-N16		.8 mm		4 mm						YES		NOT SPECIFIED	NOT SPECIFIED	4 mm
THS6043IDR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE					5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
5962-9163901Q2A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		CMOS	MIL-PRF-38535 Class Q	14 ns	EIA-422-B; TIA-422-B; V.11	3.2 mA	STANDARD	4 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified	20000 Amp	TRUE			YES	e0			8.89 mm	2 V	0 ns
DS26LS31MWFQMLV	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	300k Rad(Si)	CERAMIC, GLASS-SEALED	YES	5.5 V	4			MIL-PRF-38535 Class V	30 ns	EIA-422; FED STD 1020		STANDARD	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel			-55 Cel	4		DUAL	R-GDFP-F16		2.032 mm		6.73 mm	Not Qualified				LG_MAX	YES				10.16 mm
5962-8754601PX	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR	MIL-STD-883	20 ns	EIA-422		STANDARD	5 V	5.5 V			IN-LINE		4.5 V			4.5 V	2.54 mm	125 Cel	5 V		-55 Cel	2		DUAL	R-GDIP-T8		5.08 mm		7.62 mm	Qualified					YES
DS90UB913ATRTVJQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE		PLASTIC/EPOXY	YES		1			AEC-Q100						1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V				.5 mm	105 Cel	1.8 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm		5 mm				1		YES	e3	30	260	5 mm		0 ns
5962-8874402FX	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	2		BIPOLAR	MIL-STD-883	20 ns	GENERAL PURPOSE		GATED	5 V	5.25 V			FLATPACK		4.75 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4	TIN LEAD	DUAL	R-GDFP-F16		2.03 mm		6.73 mm	Qualified					YES	e0	NOT SPECIFIED	NOT SPECIFIED	10.2 mm
THS6022CPWPR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	33 V	2	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	15 V	16 V		-15 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	4.5 V			9 V	.65 mm	70 Cel	15 V		0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm	.25 A	4.4 mm	Not Qualified		TRUE		ALSO OPERATES AT 9V TO 32V SINGLE SUPPLY	NO	e4	30	260	5 mm		0 ns
LMH0050SQ	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm		7 mm	Not Qualified					NO	e0	30	235	7 mm
DS90UH941ASRTDTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.155 V	4			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	1.1 V	1.155 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.045 V			1.045 V	.5 mm	105 Cel	1.1 V		-40 Cel	4	NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N64	3	.9 mm		9 mm					ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.71 TO 1.89 V	YES	e4	30	260	9 mm
SN75ALS172ADWE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		22 ns	EIA-422-B; TIA-422-B; EIA-485; V.11	55 mA	STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
DS90C383MTDX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES		4		CMOS			EIA-644; TIA-644	55 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G56	2	1.2 mm		6.1 mm	Not Qualified					YES	e0	20	235	14 mm		0 ns
AM26LS31-W	Texas Instruments	LINE DRIVER
DS90UH928QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE		PLASTIC/EPOXY	YES		1			AEC-Q100			250 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm				1		NO	e3	30	260	7 mm		0 ns
UA9636ACP-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	13.2 V	1		BIPOLAR			EIA-232-C; EIA-423-A; FED STD 1030	18 mA	STANDARD	12 V			-12 V	IN-LINE					10.8 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO				9.81 mm		0 ns
SN65LVDS9638DGNG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	2				2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified					YES				4.9 mm
THS6092CDRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	7 V	2					GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		0 ns
SN75183DG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE		GATED	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00012 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified					YES	e4	30	260	8.65 mm	1.3 V	0 ns
UA9636ACDE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	13.2 V	1		BIPOLAR		140000 ns	EIA-232-E; V.10; V.28; EIA-423-B	18 mA	STANDARD	12 V		+-12	-12 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e4	30	260	4.9 mm	8 V	0 ns
5962-88744022X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-STD-883	20 ns	GENERAL PURPOSE		GATED	5 V	5.25 V			CHIP CARRIER		4.75 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified					YES				8.89 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.