LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS90C187LF/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	92	LGA	SQUARE		PLASTIC/EPOXY	YES		5						150 mA		1.8 V	1.89 V	1.8		GRID ARRAY	SLGA92,14X14,20	1.71 V	Line Driver or Receivers			.5 mm	70 Cel	1.8 V		-10 Cel		NICKEL PALLADIUM GOLD	BOTTOM	S-PBGA-N92	3	1 mm		7 mm	Not Qualified			5		YES	e4	30	260	7 mm		0 ns
SN75ALS192DG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		14 ns	EIA-422-B; TIA-422-B; V.11	45 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9.9 mm	2 V	0 ns
DS90UB633ARTVTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE	95 mA	STANDARD	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20				1.71 V	.5 mm	105 Cel		3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm		5 mm		4 Amp	COMPLEMENTARY			YES	e3	30	260	5 mm
DS90CR483AVJD/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE		PLASTIC/EPOXY	YES		4				100 ns		210 mA		3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers	.00001 Amp		.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G100	3	1.2 mm		14 mm	Not Qualified		COMPLEMENTARY	8		YES	e4	30	260	14 mm	2.7 V	0 ns
SN75C188N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	15 V	4		BIMOS		3500 ns	EIA-232-E; TIA-232-E; V.28	.16 mA	STANDARD	12 V	15 V	+-12	-12 V	IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	8 V	0 ns
SN75126D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.95 V	2		BIPOLAR		37 ns	IBM 360/370	80 mA	STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		OPEN-EMITTER	0 Cel	2		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified		TRUE		INDIVIDUAL FAULT FLAGS	NO				9.9 mm
DS25BR101TSDX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1				.465 ns		43 mA		3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N8	3	.8 mm		3 mm	Not Qualified	.01 Amp	COMPLEMENTARY	1		YES	e3	30	260	3 mm		0 ns
SN75LVDS31PWR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		6 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G16		1.2 mm		4.4 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	5 mm	.247 V	0 ns
DS90UR910QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm		6 mm				1		YES	e3	30	260	6 mm
DS91M047TMA/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4				5 ns	EIA-899; TIA-899		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.000015 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.753 mm		3.899 mm	Not Qualified		TRUE			YES	e3	30	260	9.902 mm	.48 V	0 ns
SN75172N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		65 ns	V.11; X.27; EIA-422-A; EIA-485	60 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm
MC3487DG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified					YES	e4	30	260	9.9 mm	2 V	0 ns
DS90UA101TRTVTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE		PLASTIC/EPOXY	YES		1			AEC-Q100					1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm		5 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	5 mm		0 ns
THS6053IPWPRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G14		1.2 mm		4.4 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	5 mm		0 ns
DS90C401MX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	2		CMOS		3.5 ns	EIA-644; TIA-644		STANDARD	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel		CONSTANT-CURRENT	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e0	20	235	4.9 mm	.25 V	0 ns
AM26C31CN-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	1		BICMOS		12 ns	V.11; EIA-422-A	12 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm
SN75109AD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		15 ns	GENERAL PURPOSE	30 mA	GATED	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
THS6214IPWP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	24	HTSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	14 V	1	2			1 ns	GENERAL PURPOSE		DIFFERENTIAL	6 V	28 V	+-6/+-12	-6 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	10 V	Line Driver or Receivers		5 V	.65 mm	85 Cel	12 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G24	2	1.2 mm	.416 A	4.4 mm	Not Qualified		COMPLEMENTARY			NO	e4	NOT SPECIFIED	260	7.8 mm		0 ns
AM26LV31EINSRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4				12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers		3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified				BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	10.2 mm	2 V	0 ns
AM26LV31IDG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-45 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		TRUE		BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	9.9 mm	.95 V	0 ns
SN65MLVD206BD	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1				3.5 ns	EIA-899; TIA-899		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE		3 V			3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.895 mm				1		YES	e4	30	260	4.905 mm		10 ns
SN75LVDS85DGG	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644	100 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel	4		DUAL	R-PDSO-G48		1.2 mm		6.1 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	12.5 mm		0 ns
SN75172J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	1		BIPOLAR		65 ns	V.11; X.27; EIA-422-A; EIA-485	60 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.56 mm
UA9636ACJG	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		CERAMIC, METAL-SEALED COFIRED	NO	13.2 V	2		BIPOLAR		140000 ns	EIA-232-E; TIA-232-E; V.10; V.28; EIA-423-B; TIA-423-B	18 mA	STANDARD	12 V		+-12	-12 V	IN-LINE	DIP8,.3		Line Driver or Receivers	.00001 Amp	10.8 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO		NOT SPECIFIED	NOT SPECIFIED	9.58 mm	8 V	0 ns
SN75ALS172ADW-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		22 ns	V.11; X.27; EIA-422-A; EIA-485	55 mA	STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G20		2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES				12.8 mm
DS25BR101TSD	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE		UNSPECIFIED	YES	3.6 V	1				.465 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-XDSO-N8	3	.8 mm		3 mm	Not Qualified					YES	e0			3 mm
THS6052CDDARG3	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	HLSOP	RECTANGULAR		PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
DS9636AJ/883	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	13.2 V	2		CMOS			EIA-423		STANDARD	12 V			-12 V	IN-LINE					10.8 V	2.54 mm	125 Cel			-55 Cel	2		DUAL	R-GDIP-T8		5.08 mm		7.62 mm					LG-MAX	NO				10.16 mm
SN75110ANSRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		15 ns	V.35		GATED	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.3		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		CONSTANT-CURRENT	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm		0 ns
DS90UH940TNKDTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE		UNSPECIFIED	YES	3.6 V	2			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			3 V	.5 mm	105 Cel	1.8 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2		NO	e3	30	260	9 mm
DS90C241QVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		ISO 10605		STANDARD	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm		7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns
SN65C188N	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	15 V	1		BIMOS		3500 ns	EIA-232-E; V.28	.16 mA	GATED	12 V		+-12	-12 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	4		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	8 V	0 ns
SN75C198DB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	1		BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V		+-5/+-12	-12 V	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	8 V	0 ns
THS6132RGWRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	16 V	2					GENERAL PURPOSE		STANDARD	5 V	16 V	+-5/+-15	-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.20SQ,25	3.3 V	Line Driver or Receivers		3.3 V	.65 mm	85 Cel	15 V		-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20	2	1 mm		5 mm	Not Qualified					NO	e4	30	260	5 mm		0 ns
5962-9076504QFX	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.25 V	4		BICMOS	MIL-PRF-38535 Class Q	40 ns	EIA-485		STANDARD	5 V	5.25 V			FLATPACK		4.75 V			4.75 V	1.27 mm	125 Cel	5 V		-55 Cel	4	TIN LEAD	DUAL	R-GDFP-F16		2.03 mm		6.73 mm	Qualified					YES	e0	NOT SPECIFIED	NOT SPECIFIED	10.2 mm
THS6214IRHFR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR		PLASTIC/EPOXY	YES	14 V	1	2			1 ns	GENERAL PURPOSE		DIFFERENTIAL	6 V	28 V	+-6/+-12	-6 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20	10 V	Line Driver or Receivers		5 V	.5 mm	85 Cel	12 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	R-PQCC-N24	2	1 mm	.416 A	4 mm	Not Qualified		COMPLEMENTARY			NO	e4	NOT SPECIFIED	260	5 mm		0 ns
SN75188NSRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	4		BIPOLAR		350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	SMALL OUTLINE	SOP14,.3	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	1.27 mm	70 Cel	9 V	OPEN-COLLECTOR	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified		TRUE		1 SINGLE INPUT DRIVER	NO	e4	30	260	10.2 mm	12 V	0 ns
DS90UB925QSQE	Texas Instruments	LINE DRIVER
SN65LBC174NE4	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4		BICMOS		20 ns	EIA-485		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified					YES	e4			19.305 mm	1.1 V	0 ns
LMH0002MA	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3.135 V	1.27 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e0	20	235	4.9 mm	.75 V	0 ns
5962-9076504Q2A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	4		BICMOS	MIL-PRF-38535 Class Q	40 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		CHIP CARRIER	LCC20,.35SQ	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified	60 Amp	TRUE			YES	e0			8.89 mm	1.1 V	0 ns
LMH0040SQE	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm		7 mm	Not Qualified					NO	e0	30	235	7 mm
SN75ALS194NSRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		14 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm	2 V	0 ns
LMH0050SQE	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm		7 mm	Not Qualified					NO	e0	30	235	7 mm
5962-9076502MEX	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	4		BIPOLAR	MIL-STD-883	25 ns	EIA-422; EIA-485		STANDARD	5 V	5.25 V			IN-LINE		4.75 V			4.5 V	2.54 mm	125 Cel	5 V		-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Qualified					YES				19.43 mm
SN75158JG-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	1		BIPOLAR		20 ns	EIA-422-A	50 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-GDIP-T8		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				9.6 mm		0 ns
THS6132VFPRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	32	HLQFP	SQUARE		PLASTIC/EPOXY	YES	16 V	2					GENERAL PURPOSE		STANDARD	5 V	16 V	+-5/+-15	-5 V	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP32,.35SQ,32	3.3 V	Line Driver or Receivers		3.3 V	.8 mm	85 Cel	15 V		-40 Cel	2		QUAD	S-PQFP-G32		1.6 mm		7 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	7 mm		0 ns
DS90C031WGRQMLV/NOPB	Texas Instruments	LINE DRIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	100k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		CMOS	MIL-PRF-38535 Class V	5 ns	IEEE 1596.3		STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	125 Cel			-55 Cel	4		DUAL	R-CDSO-G16	1	2.33 mm		6.35 mm	Not Qualified					YES

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.