LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75C198NE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	15 V	4		BIMOS		3500 ns	EIA-232-E; TIA-232-E; V.28	.16 mA	GATED	12 V		+-5/+-12	-12 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED		2 SINGLE INPUT DRIVERS	NO	e4			19.305 mm	8 V	0 ns
SN75112DRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		15 ns	V.35	40 mA	GATED	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00008 Amp	4.75 V	1.27 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		HIGH DRIVE	YES	e4	30	260	8.65 mm		0 ns
5962-9163901QFA	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4		CMOS	MIL-PRF-38535 Class Q	14 ns	EIA-422-B; TIA-422-B; V.11	3.2 mA	STANDARD	4 V	5.5 V	5		FLATPACK	FL16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	DUAL	R-GDFP-F16		2.03 mm		6.73 mm	Qualified	20000 Amp	TRUE			YES	e0			10.16 mm	2 V	0 ns
SN75C188NSE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	4		BIMOS		3500 ns	EIA-232-E; V.28		GATED	12 V			-12 V	SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified					NO	e4	30	260	10.2 mm
SN75151N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		30 ns	EIA-422-A; FED STD 1020	80 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T20		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		ADDITIONAL COMMON ENABLE INPUT	YES				24.325 mm		0 ns
SN75159DRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		25 ns	EIA-422-B; TIA-422-B; V.11	65 mA	GATED	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	2 V	0 ns
SN65LVDS303ZQER	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE		PLASTIC/EPOXY	YES	1.95 V	1		CMOS			GENERAL PURPOSE	25.8 mA	STANDARD	1.8 V		1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20		Line Driver or Receivers		1.65 V	.5 mm	85 Cel			-40 Cel	2	TIN SILVER COPPER	BOTTOM	S-PBGA-B80	3	1 mm		5 mm	Not Qualified			3		YES	e1	30	260	5 mm		0 ns
DS90CR215MTD	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	3		CMOS			EIA-644; TIA-644	55 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm		6.1 mm	Not Qualified		COMPLEMENTARY			YES	e0	20	235	12.5 mm		0 ns
DS96F174CN	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		16 ns	EIA-422; EIA-485		STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm						YES				19.305 mm
LMH0202MT	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.465 V	2					GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3.135 V	.65 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified					YES	e0		260	5 mm	.75 V	0 ns
DS26LS31MJFQMLV	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	300k Rad(Si)	CERAMIC, GLASS-SEALED	NO	5.5 V	4			MIL-PRF-38535 Class V	30 ns	EIA-422; FED STD 1020		STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified				LG_MAX; SEATED HGT-NOM	YES				19.94 mm
DS26F31MWG/883	Texas Instruments	LINE DRIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	25 ns	EIA-422; FED STD 1020		STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	125 Cel			-55 Cel	4		DUAL	R-CDSO-G16		2.33 mm		6.35 mm	Not Qualified				LG_MAX	YES				9.91 mm
THS6042IDDAG3	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HLSOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE					5 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e3	30	260	4.89 mm		0 ns
SN75ALS192J	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	4		TTL		14 ns	EIA-422-A		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	2 V	0 ns
DS90CF363BMTX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	55 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	4	TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm		6.1 mm	Not Qualified					YES	e0	20	235	12.5 mm		0 ns
5962F7802301MEA	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	300k Rad(Si)	CERAMIC, GLASS-SEALED	NO	5.5 V	4			MIL-STD-883	30 ns	EIA-422; FED STD 1020		STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified				LG_MAX; SEATED HGT-NOM	YES				19.94 mm
UA9638CPE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		20 ns	EIA-422-B; TIA-422-B	65 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES	e4			9.81 mm	2 V	0 ns
THS6032CDWP	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	HSOP	RECTANGULAR		PLASTIC/EPOXY	YES	32 V	1	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V	16 V		-5 V	SMALL OUTLINE, HEAT SINK/SLUG		5 V			10 V	1.27 mm	70 Cel	15 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	2	2.65 mm	.44 A	7.52 mm	Not Qualified		TRUE		ALSO REQUIRES -5V TO -16V SUPPLY	NO	e4	30	260	12.825 mm		0 ns
SN75110ADR-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		15 ns	GENERAL PURPOSE	35 mA	GATED	5 V			-5 V	SMALL OUTLINE					4.75 V		70 Cel		OPEN-COLLECTOR	0 Cel	2		DUAL	R-PDSO-G14					Not Qualified		COMPLEMENTARY		HIGH DRIVE	YES						0 ns
THS6052IDRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		0 ns
LMH0040SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		UNSPECIFIED	YES	2.625 V	5					GENERAL PURPOSE		DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm		7 mm						NO	e3	30	260	7 mm		0 ns
SN75114N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		30 ns	GENERAL PURPOSE	50 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	1		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES				19.305 mm		0 ns
SN65LBC172NE4	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4		BICMOS		20 ns	EIA-485		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified					YES	e4			19.305 mm	1.1 V	0 ns
5962-86889012A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	15 V	4		BIPOLAR	MIL-PRF-38535	350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	CHIP CARRIER	LCC20,.35SQ	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	1.27 mm	125 Cel	9 V		-55 Cel	4	Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified				1 SINGLE INPUT DRIVER	NO	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm	12 V	0 ns
SN75C188D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	1		BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V			-12 V	SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO				8.65 mm
SN75158DE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	50 mA	STANDARD	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	4.9 mm	2 V	0 ns
DS90C241QVSX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		GENERAL PURPOSE		STANDARD	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel	24	TIN LEAD	QUAD	S-PQFP-G48	1	1.2 mm		7 mm						YES	e0	30	235	7 mm
DS90CR217MDC	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD		DIE	UNSPECIFIED		UNSPECIFIED	YES	3.6 V	1		CMOS			EIA-644; TIA-644		STANDARD	3.3 V				UNCASED CHIP					3 V		70 Cel			-10 Cel	3		UPPER	X-XUUC-N					Not Qualified					YES
DS90UR241IVS	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100		ISO 10605		STANDARD	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel	24	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm		7 mm	Not Qualified			1		YES	e0			7 mm
SN75ALS192J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	1		BIPOLAR		14 ns	EIA-422-A		STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.56 mm
SN75172DW-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		65 ns	V.11; X.27; EIA-422-A; EIA-485	60 mA	STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G20		2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES				12.8 mm
UA9636ACJG-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	13.2 V	1		BIPOLAR			EIA-232-C; EIA-423-A; FED STD 1030	18 mA	STANDARD	12 V			-12 V	IN-LINE					10.8 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-GDIP-T8		5.08 mm		7.62 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO				9.6 mm		0 ns
AM26LS31CN-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		20 ns	EIA-422-A; FED STD 1020		STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm
SN75LBC172DWG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		20 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
SN75C198N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	15 V	4		BIMOS		3500 ns	EIA-232-E; TIA-232-E; V.28	.16 mA	GATED	12 V	15 V	+-5/+-12	-12 V	IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	70 Cel	12 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED		2 SINGLE INPUT DRIVERS	NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	8 V	0 ns
THS6093IDRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	7 V	2					GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		2.5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY; LOW POWER SHUTDOWN MODE AVAILABLE	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
SN65LVDS391DR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.9 ns	EIA-644; TIA-644	26 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.91 mm	Not Qualified		TRUE			YES	e4	30	260	9.9 mm	.247 V	0 ns
DS90UB925QSQX	Texas Instruments	LINE DRIVER													AEC-Q100
DS90C031BTM	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4		CMOS		3.5 ns	EIA-644; TIA-644		STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		TRUE			YES	e0	20	235	9.9 mm	.25 V	0 ns
DS90LV011AQMF	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1				1.5 ns	EIA-644-A; TIA-644-A		STANDARD	3.3 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37				3 V	.95 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G5	1	1.45 mm		1.6 mm	Not Qualified					YES	e0	40	260	2.92 mm
THS6093IDG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	7 V	2					GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		2.5 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY; LOW POWER SHUTDOWN MODE AVAILABLE	NO	e4	30	260	8.65 mm		0 ns
THS6052IDDAG3	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HLSOP	RECTANGULAR		PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e3	30	260	4.89 mm		0 ns
SN75LVDS389DBTRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	38	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	8		CMOS		2.9 ns	EIA-644; TIA-644	70 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V	3-STATE	0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	2	1.2 mm		4.4 mm	Not Qualified		TRUE			YES	e4	30	260	9.7 mm	.247 V	0 ns
SN65MLVD047AD	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.4 ns	EIA-899; TIA-899	70 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		TRUE			YES	e4	30	260	9.9 mm	.48 V	0 ns
LMH0340SQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm		7 mm	Not Qualified					NO	e0	30	235	7 mm
SN65LVDS389DBTG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	38	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	8		CMOS		2.9 ns	EIA-644; TIA-644	70 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	2	1.2 mm		4.4 mm	Not Qualified		TRUE			YES	e4	30	260	9.7 mm	.247 V	0 ns
5962-8874402FA	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	2		BIPOLAR	MIL-STD-883	20 ns	GENERAL PURPOSE	50 mA	GATED	5 V	5.5 V	5		FLATPACK	FL16,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm		6.73 mm	Qualified	40000 Amp			CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm	2 V	0 ns
SN75114J	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	2		BIPOLAR		30 ns	GENERAL PURPOSE		GATED	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel			0 Cel	2		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified				CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	1.55 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.