LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS90LV031ATMTC	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2 ns	EIA-644; TIA-644; IEEE 1596.3		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified		TRUE			YES	e0		260	5 mm	.25 V	0 ns
5962-9076503QFX	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.25 V	4		BICMOS	MIL-PRF-38535 Class Q	40 ns	EIA-485		STANDARD	5 V	5.25 V			FLATPACK		4.75 V			4.75 V	1.27 mm	125 Cel	5 V		-55 Cel	4	TIN LEAD	DUAL	R-GDFP-F16		2.03 mm		6.73 mm	Qualified					YES	e0	NOT SPECIFIED	NOT SPECIFIED	10.2 mm
AM26LS31CNSE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm
THS6093CDRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	7 V	2					GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		2.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY; LOW POWER SHUTDOWN MODE AVAILABLE	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
THS6043IPWPRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	HTSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	2	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V		-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		5 V			5 V	.65 mm	85 Cel	12 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.2 mm	.35 A	4.4 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm		0 ns
SN75121NSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		50 ns	GENERAL PURPOSE	60 mA	GATED	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.3	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	OPEN-EMITTER	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified	8 Amp	TRUE			NO	e4	30	260	10.2 mm	2.4 V	0 ns
5962-9321001MCA	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	15 V	4			MIL-STD-883	300 ns	GENERAL PURPOSE		STANDARD	4.5 V				IN-LINE					3 V		125 Cel			-55 Cel	4		DUAL	R-GDIP-T14					Qualified					NO
AM26C31IN-00	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	1		BICMOS		12 ns	V.11; EIA-422-A	12 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm
SN75C188DBLE-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	1		BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V			-12 V	SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4		DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO				6.2 mm
SN75ALS194J	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO		4		TTL		14 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00005 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-XDIP-T16					Not Qualified					YES					2 V
DS26F31MWGFQMLV	Texas Instruments	LINE DRIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	300k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-PRF-38535 Class V	25 ns	EIA-422; FED STD 1020		STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	125 Cel			-55 Cel	4		DUAL	R-CDSO-G16		2.33 mm		6.35 mm	Not Qualified				LG_MAX	YES				9.91 mm
DS90UH925ATRHSRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		ISO 10605		STANDARD	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel	1	Matte Tin (Sn)	QUAD	S-PQCC-N48	3	.8 mm		7 mm						YES	e3	NOT SPECIFIED	260	7 mm
THS6093IPWPRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	7 V	2					GENERAL PURPOSE		DIFFERENTIAL	5 V	7 V	12	-5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	2.5 V	Line Driver or Receivers		2.5 V	.65 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm		4.4 mm	Not Qualified		COMPLEMENTARY		ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY; LOW POWER SHUTDOWN MODE AVAILABLE	NO	e4	30	260	5 mm		0 ns
SN75ALS130D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.95 V	1		BIPOLAR		28 ns	IBM 360/370	47 mA	STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		OPEN-EMITTER	0 Cel	4		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		TOTEM-POLE INVERTED OUTPUT; COMMON FAULT FLAG	NO				9.9 mm
DS90C187LFX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	92	LGA	SQUARE		PLASTIC/EPOXY	YES		5						150 mA		1.8 V	1.89 V	1.8		GRID ARRAY	SLGA92,14X14,20	1.71 V	Line Driver or Receivers			.5 mm	70 Cel	1.8 V		-10 Cel		NICKEL PALLADIUM GOLD	BOTTOM	S-PBGA-N92	3	1 mm		7 mm	Not Qualified			5		YES	e4	30	260	7 mm		0 ns
SN75LBC174A16DWG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	10.3 mm	1 V	0 ns
AM26LV31D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		BICMOS		12 ns	V.11; EIA-422-B		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G16					Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED		.95 V	0 ns
SN75113N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		30 ns	GENERAL PURPOSE	65 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	2		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		1 SINGLE INPUT DRIVER; CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES				19.305 mm		0 ns
THS6032CVFP	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	32	HLQFP	SQUARE		PLASTIC/EPOXY	YES	16 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V	16 V		-5 V	FLATPACK, HEAT SINK/SLUG, LOW PROFILE		5 V			3 V	.8 mm	70 Cel	15 V		0 Cel	2		QUAD	S-PQFP-G32		1.6 mm		7 mm	Not Qualified				ALSO REQUIRES -5V TO -16V SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	7 mm		0 ns
5962-9076502M2X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	25 ns	EIA-485	50 mA	STANDARD	5 V	5.5 V			CHIP CARRIER	LCC20,.35SQ	4.5 V		.00002 Amp	4.5 V	1.27 mm	125 Cel	5 V	DIFFERENTIAL	-55 Cel	4		QUAD	S-CQCC-N20		1.905 mm		8.89 mm	Qualified		COMPLEMENTARY			YES				8.89 mm
SN75ALS121N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		50 ns	GENERAL PURPOSE	30 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	1		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		TRUE			NO				19.305 mm
SN75ALS191DRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		TTL		7 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000025 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e4	30	260	4.9 mm	2 V	0 ns
DS90LV011AHMFX	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		CMOS		1.5 ns	EIA-644-A; TIA-644-A		STANDARD	3.3 V		3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		Line Driver or Receivers	.00001 Amp	3 V	.95 mm	125 Cel		3-STATE	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G5	1	1.45 mm		1.6 mm	Not Qualified					YES	e0		260	2.92 mm	.25 V	0 ns
DS90CR285MTD	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	55 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G56	2	1.1 mm		6.1 mm	Not Qualified		COMPLEMENTARY			YES	e0	20	235	14 mm		0 ns
SN75158D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	50 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	4.9 mm	2 V	0 ns
5962-9076503QFA	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.25 V	4		BICMOS	MIL-PRF-38535 Class Q	40 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		FLATPACK	FL16,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm		6.73 mm	Qualified					YES	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm	1.1 V	0 ns
SN75123DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		25 ns	IBM 360	60 mA	GATED	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		OPEN-EMITTER	0 Cel	2		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified		TRUE			NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	2.75 V	0 ns
SN75159D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		25 ns	EIA-422-B; TIA-422-B; V.11	65 mA	GATED	5 V	5.25 V	5		SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	40 Amp	COMPLEMENTARY			YES	e4	30	260	8.65 mm	2 V	0 ns
LMH0303SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE		UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE	57 mA	DIFFERENTIAL	3.3 V	3.46 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.13 V	Line Driver or Receivers		3.135 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm		4 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4 mm	.72 V	0 ns
THS6184RHFT	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR		UNSPECIFIED	YES	32 V	1	4	BIPOLAR			GENERAL PURPOSE		STANDARD	12 V	15 V	+-4/+-16	-12 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20	4 V	Line Driver or Receivers		8 V	.5 mm	85 Cel	12 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N24	2	1 mm	.415 A	4 mm	Not Qualified		COMPLEMENTARY			NO	e4	30	260	5 mm		0 ns
5962-9076502M2A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	25 ns	EIA-485; EIA-422	50 mA		5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20	1	1.91 mm		8.89 mm	Qualified					YES				8.89 mm
DS90UB927QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE		PLASTIC/EPOXY	YES		1			AEC-Q100			160 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm		6 mm			COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
DS14C88MDC	Texas Instruments	LINE DRIVER	COMMERCIAL EXTENDED	NO LEAD		DIE	UNSPECIFIED		UNSPECIFIED	YES	12.6 V	4		CMOS		6000 ns	EIA-232-D; V.28		GATED	9 V			-9 V	UNCASED CHIP					4.5 V		75 Cel			0 Cel	4		UPPER	X-XUUC-N					Not Qualified				1 SINGLE INPUT DRIVER	NO
THS6184RHFR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR		UNSPECIFIED	YES	32 V	1	4	BIPOLAR			GENERAL PURPOSE		STANDARD	12 V	15 V	+-4/+-16	-12 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20	4 V	Line Driver or Receivers		8 V	.5 mm	85 Cel	12 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N24	2	1 mm	.415 A	4 mm	Not Qualified		COMPLEMENTARY			NO	e4	30	260	5 mm		0 ns
DS90UB940TNKDRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE		UNSPECIFIED	YES	3.6 V	2			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			3 V	.5 mm	105 Cel	1.8 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2		NO	e3	30	260	9 mm
SN75LVDS391DG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.9 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	70 Cel	3.3 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		TRUE			YES	e4	30	260	9.9 mm	.247 V	0 ns
SN65LVDS84ADGGRQ1	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS	AEC-Q100		EIA-644; TIA-644	39 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G48		1.2 mm		6.1 mm	Not Qualified					YES				12.5 mm		0 ns
SN75188NSE4	Texas Instruments	LINE DRIVER	MILITARY	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	4		BIPOLAR		175 ns	V.28; EIA-232-E		GATED	9 V			-9 V	SMALL OUTLINE					7.5 V	1.27 mm	125 Cel			-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified					NO	e4	30	260	10.2 mm
SN75114W	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2				30 ns			STANDARD	5 V				SMALL OUTLINE					4.75 V		70 Cel			0 Cel	2		DUAL	R-PDSO-G16					Not Qualified					YES						0 ns
SN75110AN-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		15 ns	GENERAL PURPOSE	35 mA	GATED	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		HIGH DRIVE	YES				19.305 mm		0 ns
THS6032IVFPRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	32	HLQFP	SQUARE		PLASTIC/EPOXY	YES	16 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V	16 V		-5 V	FLATPACK, HEAT SINK/SLUG, LOW PROFILE		5 V			3 V	.8 mm	85 Cel	15 V		-40 Cel	2		QUAD	S-PQFP-G32		1.6 mm		7 mm	Not Qualified				ALSO REQUIRES -5V TO -16V SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	7 mm		0 ns
SN75112D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		15 ns	V.35	40 mA	GATED	5 V	5.25 V	+-5	-5 V	SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel	5 V	OPEN-COLLECTOR	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		HIGH DRIVE	YES	e4	NOT SPECIFIED	260	8.65 mm		0 ns
DS90CF363AMTD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	52 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	4	TIN LEAD	DUAL	R-PDSO-G48		1.2 mm		6.1 mm	Not Qualified					YES	e0			12.5 mm		0 ns
THS6032CVFPG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	32	HLQFP	SQUARE		PLASTIC/EPOXY	YES	16 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V	16 V		-5 V	FLATPACK, HEAT SINK/SLUG, LOW PROFILE		5 V			3 V	.8 mm	70 Cel	15 V		0 Cel	2		QUAD	S-PQFP-G32		1.6 mm		7 mm	Not Qualified				ALSO REQUIRES -5V TO -16V SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	7 mm		0 ns
DS90UH949ATRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL	1.8 V	1.155 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.045 V			1.71 V	.5 mm	105 Cel	1.1 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm						YES	e4	30	260	9 mm
DS14C88MX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	12.6 V	4		CMOS		6000 ns	EIA-232-D; V.28		GATED	9 V		+-4.5/+-12	-9 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel			0 Cel	4	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e0	20	235	8.65 mm	6 V	0 ns
THS6301IRSAT	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	12.6 V	1	1				GENERAL PURPOSE		DIFFERENTIAL	12 V	12.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		11.4 V			11.4 V	.65 mm	85 Cel	12 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	1	1 mm	.085 A	4 mm						YES	e4	30	260	4 mm
SN75ALS172AN	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		22 ns	EIA-422-B; TIA-422-B; EIA-485; V.11	55 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified	.06 Amp	COMPLEMENTARY			YES	e4			19.305 mm	1.5 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.