LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
THS6093ID	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	7 V	2					GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		2.5 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY; LOW POWER SHUTDOWN MODE AVAILABLE	NO	e4	30	260	8.65 mm		0 ns
UA9636ACPE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	13.2 V	2		BIPOLAR		140000 ns	EIA-232-E; TIA-232-E; V.10; V.28; EIA-423-B; TIA-423-B	18 mA	STANDARD	12 V	13.2 V	+-12	-12 V	IN-LINE	DIP8,.3	10.8 V	Line Driver or Receivers	.00001 Amp	10.8 V	2.54 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	8 V	0 ns
MC3487DE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	85 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	9.9 mm	2 V	0 ns
LMH0002SQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE		UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.135 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N16	1	.8 mm		4 mm	Not Qualified					YES	e0		260	4 mm
SN75LBC172DW	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		20 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified	.06 Amp	COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
MC3487N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		20 ns	EIA-422-A; FED STD 1020	85 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm
SN65LVDS315RGERG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.95 V	1					GENERAL PURPOSE	13.3 mA	STANDARD	1.8 V		1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		Line Driver or Receivers		1.65 V	.5 mm	85 Cel			-40 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	3	1 mm		4 mm	Not Qualified				DUMMY VAL	YES	e4	30	260	4 mm		0 ns
SN75126N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.95 V	2		BIPOLAR		37 ns	IBM 360/370	80 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	2		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		TRUE		INDIVIDUAL FAULT FLAGS	NO				19.305 mm
5962-7802301VEX	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	4		BIPOLAR	MIL-PRF-38535 Class V	30 ns	EIA-422; FED STD 1020		STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified					YES				19.43 mm
DS90UA101TRTVRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE		PLASTIC/EPOXY	YES		1			AEC-Q100					1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm		5 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	5 mm		0 ns
DS26C31MW/883	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4		CMOS	MIL-STD-883	14 ns	EIA-422	2 mA	STANDARD	5 V	5.5 V	5		FLATPACK	FL16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16	1	2.032 mm		6.35 mm	Not Qualified		TRUE		LG-MAX	YES	e0	NOT SPECIFIED	NOT SPECIFIED	9.906 mm	2 V	0 ns
THS6182PWPR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	2					GENERAL PURPOSE		STANDARD	12 V		+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		5 V	.65 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G20		1.2 mm		4.4 mm	Not Qualified				CAN ALSO OPERATE WITH SINGLE SUPPLY OF 10V TO 30V	NO				6.5 mm		0 ns
AM26LS31CDNOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	4		DUAL	R-PDSO-G16		1.75 mm		3.9 mm						YES				9.9 mm
DS3691MDC	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD		DIE	UNSPECIFIED		UNSPECIFIED	YES	5.25 V	2		BIPOLAR		300 ns	EIA-423; EIA-442		STANDARD	5 V			-5 V	UNCASED CHIP					4.75 V		70 Cel			0 Cel	2		UPPER	X-XUUC-N					Not Qualified				CONFIGURABLE INTERFACE STANDARDS	YES
UA9638ACJG-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	1		BIPOLAR		15 ns	EIA-422-A	65 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-GDIP-T8		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				9.6 mm		0 ns
DS9638CMX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES		2		BIPOLAR		20 ns	EIA-422		STANDARD	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000025 Amp		1.27 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e3	30	260	4.9 mm	2 V	0 ns
DS90CR584MTD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	1		CMOS			EIA-644		DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers		4.5 V	.5 mm	70 Cel			-10 Cel		TIN LEAD	DUAL	R-PDSO-G56	2	1.1 mm		6.1 mm	Not Qualified			4			e0		235	14 mm		0 ns
THS6042CDDAG3	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	HLSOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE					5 V	1.27 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e3	30	260	4.89 mm		0 ns
LMH0356SQE-40	Texas Instruments	LINE DRIVER
SN75113DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		30 ns	GENERAL PURPOSE	65 mA	GATED	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		1 SINGLE INPUT DRIVER	YES		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	1.6 V	0 ns
5962-7802302M2A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	25 ns	EIA-422; FED STD 1020	40 mA	STANDARD	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20	1	1.91 mm		8.89 mm	Qualified					YES				8.89 mm
SN75114DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		30 ns	GENERAL PURPOSE	50 mA	GATED	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	1.55 V	0 ns
5962-9762101VFX	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	3.6 V	4			MIL-PRF-38535 Class V	4.5 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V			FLATPACK		3 V			3 V	1.27 mm	125 Cel	3.3 V		-55 Cel	4	TIN LEAD	DUAL	R-GDFP-F16		2.03 mm		6.73 mm	Qualified					YES	e0	NOT SPECIFIED	NOT APPLICABLE	10.2 mm
5962-87547012A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535	15 ns	V.35	35 mA	GATED	5 V	5.5 V	+-5	-5 V	CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel	5 V	CONSTANT-CURRENT	-55 Cel	2	Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified		COMPLEMENTARY		HIGH DRIVE	YES	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm	2 V	0 ns
SN75114NE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		30 ns	GENERAL PURPOSE		GATED	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified				CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES	e4			19.305 mm	1.55 V	0 ns
THS6182DR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	2					GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES WITH 24V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm		0 ns
DS90UR910SQ/NOPB	Texas Instruments	LINE DRIVER
SN75112DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		15 ns	V.35	40 mA	GATED	5 V	5.25 V	+-5	-5 V	SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel	5 V	OPEN-COLLECTOR	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		HIGH DRIVE	YES	e4	NOT SPECIFIED	260	8.65 mm		0 ns
SN75ALS191PSRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		TTL		7 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE	SOP8,.3		Line Driver or Receivers	.000025 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	6.2 mm	2 V	0 ns
SN75126D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.95 V	2		BIPOLAR		37 ns	IBM 360/370	80 mA	STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	70 Cel		OPEN-EMITTER	0 Cel	2		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified		TRUE		INDIVIDUAL FAULT FLAGS	NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	2.96 V	0 ns
AM26C31MWB	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4		BICMOS	38535Q/M;38534H;883B	12 ns	EIA-422-B; TIA-422-B; V.11	3.2 mA	STANDARD	4 V	5.5 V	5		FLATPACK	FL16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	DUAL	R-GDFP-F16		2.03 mm		6.73 mm	Not Qualified	20000 Amp	TRUE			YES	e0			10.16 mm	2 V	0 ns
DS26F31MJ-QMLV	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	4		BIPOLAR	MIL-PRF-38535 Class V	25 ns	EIA-422; FED STD 1020		STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified				LG_MAX; SEATED HGT-NOM	YES				19.94 mm
THS6012CDWPR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	HSOP	RECTANGULAR		PLASTIC/EPOXY	YES	33 V	2	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V	16 V		-5 V	SMALL OUTLINE, HEAT SINK/SLUG		4.5 V			9 V	1.27 mm	70 Cel	15 V		0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	2	2.65 mm	.5 A	7.52 mm	Not Qualified				9V TO 32V SINGLE SUPPLY OPERATION ALSO POSSIBLE	NO	e4	30	260	12.825 mm		0 ns
SN65LVDS31NSR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.3	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified		TRUE			YES	e4	NOT SPECIFIED	260	10.2 mm	.247 V	0 ns
THS6012IGQE	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE		PLASTIC/EPOXY	YES	16 V	2					GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	GRID ARRAY, VERY THIN PROFILE, FINE PITCH					4.5 V	.5 mm	85 Cel			-40 Cel	2		BOTTOM	S-PBGA-B80		1 mm		5 mm	Not Qualified				9V TO 32V SINGLE SUPPLY OPERATION ALSO POSSIBLE	NO				5 mm		0 ns
AM26LV31NSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		BICMOS		12 ns	V.11; EIA-422-B		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G16		2 mm		5.3 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	.95 V	0 ns
5962-8688901CX	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	15 V	4		BIPOLAR	MIL-STD-883	175 ns	EIA-232-E; TIA-232-E; V.28		GATED	9 V	15 V		-9 V	IN-LINE		7.5 V			7.5 V	2.54 mm	125 Cel	9 V		-55 Cel	4	TIN LEAD	DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Qualified					NO	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm
AM26LS31CN-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		20 ns	EIA-422-A; FED STD 1020		STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm
THS6042CDDAR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	HLSOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE					5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
5962F7802302VZA	Texas Instruments	LINE DRIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	300k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-PRF-38535 Class V	25 ns	EIA-422; FED STD 1020		STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	125 Cel			-55 Cel	4		DUAL	R-CDSO-G16		2.33 mm		6.35 mm	Not Qualified				LG_MAX	YES				9.91 mm
SN75C198DRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	4		BIMOS		3500 ns	EIA-232-E; TIA-232-E; V.28	.16 mA	GATED	12 V		+-5/+-12	-12 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified		INVERTED		2 SINGLE INPUT DRIVERS	NO	e4	30	260	8.65 mm	8 V	0 ns
SN75ALS191D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		7 ns	EIA-422-A	40 mA	STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES				4.9 mm
AM26LV31CNS	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified				BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	10.2 mm	.95 V	0 ns
SN75LVDS83DGGRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	110 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm		6.1 mm	Not Qualified		TRUE			YES	e4	30	260	14 mm		0 ns
DS90C2501SLB	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	128	QCCN	SQUARE		UNSPECIFIED	YES	2.75 V	2		CMOS			EIA-644; TIA-644		STANDARD	2.5 V	3.6 V	2.5,3.3		CHIP CARRIER	LGA128,20X20,20	3 V	Line Driver or Receivers		2.25 V	1 mm	70 Cel	3.3 V		0 Cel	2		QUAD	S-XQCC-N128	4	1.1 mm		10 mm	Not Qualified					NO				10 mm		0 ns
SN75ALS172AN-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		22 ns	V.11; X.27; EIA-422-A; EIA-485	55 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm
5962-88648012A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	22 ns	GENERAL PURPOSE		STANDARD	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	125 Cel		3-STATE	-55 Cel	1	TIN LEAD	QUAD	S-CQCC-N20					Not Qualified					YES	e0				2 V	0 ns
DS90CR214MTD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4					EIA-644; TIA-644		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.5 mm	70 Cel			-10 Cel			DUAL	R-PDSO-G48		1.1 mm		6.1 mm				4						12.5 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.