LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS90UH927QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE		PLASTIC/EPOXY	YES		1			AEC-Q100			160 mA		3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm		6 mm	Not Qualified					NO	e3	30	260	6 mm		0 ns
AM26C31CN-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	1		BICMOS		12 ns	V.11; EIA-422-A	12 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm
SN75ALS192NSE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4				14 ns	V.11; EIA-422-B		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm
5962-7802302MFX	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	25 ns	GENERAL PURPOSE		STANDARD	5 V	5.5 V			FLATPACK		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		DUAL	R-GDFP-F16		2.032 mm		6.35 mm	Qualified					YES
5962-7802301Q2A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-PRF-38535 Class Q	30 ns	V.11; EIA-422-B; EIA-423-B	80 mA	STANDARD	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified	20 Amp				YES	e0			8.89 mm	2 V	0 ns
V62/06677-02XE	Texas Instruments	LINE DRIVER	MILITARY	GULL WING	28	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1			MIL-STD-883		GENERAL PURPOSE	70 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	Line Driver or Receivers		3 V	.65 mm	125 Cel	3.3 V		-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2 mm		5.3 mm	Not Qualified			1		YES	e4	30	260	10.2 mm		0 ns
SN75159NSRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		25 ns	EIA-422-B; TIA-422-B; V.11		GATED	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	2 V	0 ns
SN75C198DE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	4		BIMOS		3500 ns	EIA-232-E; TIA-232-E; V.28	.16 mA	GATED	12 V		+-5/+-12	-12 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified		INVERTED		2 SINGLE INPUT DRIVERS	NO	e4	30	260	8.65 mm	8 V	0 ns
SN75LVDS387DGGRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	64	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	16		CMOS		2.9 ns	EIA-644; TIA-644	95 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V	3-STATE	0 Cel	16	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G64	2	1.2 mm		6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	17 mm	.247 V	0 ns
THS6032IDWPR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	HSOP	RECTANGULAR		PLASTIC/EPOXY	YES	32 V	1	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V	16 V		-5 V	SMALL OUTLINE, HEAT SINK/SLUG		5 V			10 V	1.27 mm	85 Cel	15 V	TOTEM-POLE	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	2	2.65 mm	.44 A	7.52 mm	Not Qualified		TRUE		ALSO REQUIRES -5V TO -16V SUPPLY	NO	e4	30	260	12.825 mm		0 ns
5962-9865101QXA	Texas Instruments	LINE DRIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	3.6 V	4		CMOS	MIL-PRF-38535 Class Q	3.5 ns	EIA-644; TIA-644; IEEE P1596.3		STANDARD	3.3 V		3.3		SMALL OUTLINE	FL16,.25		Line Driver or Receivers		3 V	1.27 mm	125 Cel		3-STATE	-55 Cel	4	TIN LEAD	DUAL	R-GDSO-G16		2.3368 mm		6.35 mm	Not Qualified					YES	e0				.25 V	0 ns
SN65LV1021DBRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1					GENERAL PURPOSE	50 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm		0 ns
SN75130DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.95 V	1		BIPOLAR		37 ns	IBM 360/370	85 mA	STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel	4		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		COMMON FAULT FLAG	YES				9.9 mm		0 ns
LMH0002MA/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.465 V	1					GENERAL PURPOSE	49 mA	DIFFERENTIAL	3.3 V	3.399 V	3.3		SMALL OUTLINE	SOP8,.25	3.201 V	Line Driver or Receivers		3.135 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4.9 mm	.75 V	0 ns
SN65MLVD047PWG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.4 ns	EIA-899; TIA-899		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified		TRUE			YES	e4	30	260	5 mm	.48 V	0 ns
LMH0302SQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	VQCCN	SQUARE		PLASTIC/EPOXY	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, VERY THIN PROFILE					3.135 V	.65 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N16		.8 mm		4 mm						YES				4 mm
SN75159NSRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		25 ns	EIA-422-B; TIA-422-B; V.11		GATED	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	2 V	0 ns
SN65ALS172ADW-00	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		22 ns	V.11; X.27; EIA-422-A; EIA-485	55 mA	STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G20		2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES				12.8 mm
AM26C31MFK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	HQCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3.2 mA	STANDARD	5 V		5		CHIP CARRIER, HEAT SINK/SLUG	LCC20,.35SQ		Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	125 Cel		3-STATE	-55 Cel	4		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Not Qualified		COMPLEMENTARY			YES				8.89 mm	2 V	0 ns
DS26LS31MW-QMLV	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4			MIL-PRF-38535 Class V	30 ns	EIA-422; FED STD 1020		STANDARD	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel			-55 Cel	4		DUAL	R-GDFP-F16		2.032 mm		6.73 mm	Not Qualified				LG_MAX	YES				10.16 mm
SN65C198DR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	1		BIMOS		3500 ns	EIA-232-E; V.28	.16 mA	GATED	12 V		+-5/+-12	-12 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		INVERTED		2 SINGLE INPUT DRIVERS	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	8 V	0 ns
THS6093CPWP	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	7 V	2					GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25		Line Driver or Receivers		2.5 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm		4.4 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY; LOW POWER SHUTDOWN MODE AVAILABLE	NO	e4	30	260	5 mm		0 ns
SN75LBC174ADWR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified		INVERTED			YES	e4	30	260	12.8 mm	1 V	0 ns
SN75174J	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		65 ns	EIA-422-B; TIA-422-B; EIA-485; V.11		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	1.5 V	0 ns
SN75183NSE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		16 ns			GATED	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm
THS6184PWP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	32 V	1	4	BIPOLAR			GENERAL PURPOSE		STANDARD	12 V	15 V	+-4/+-16	-12 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	4 V	Line Driver or Receivers		8 V	.65 mm	85 Cel	12 V	DIFFERENTIAL	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	2	1.2 mm	.415 A	4.4 mm	Not Qualified		COMPLEMENTARY			NO	e4	NOT SPECIFIED	260	6.5 mm		0 ns
DS90UB925QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		ISO 10605	170 mA	STANDARD	3.3 V	3.6 V	1.8/3.3,3.3		CHIP CARRIER	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns
SN75159J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	1		BIPOLAR		20 ns	EIA-422-A	65 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.56 mm		0 ns
THS6052IDDA	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HLSOP	RECTANGULAR		PLASTIC/EPOXY	YES	16.5 V	2	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V	+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25	5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	12 V		-40 Cel	2	Matte Tin (Sn)	DUAL	R-PDSO-G8	1	1.68 mm	.175 A	3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e3	NOT SPECIFIED	260	4.89 mm		0 ns
DS90UR908QSQX	Texas Instruments	LINE DRIVER		NO LEAD	48		SQUARE		UNSPECIFIED	YES														CHIP CARRIER												TIN LEAD	QUAD	S-XQCC-N48	1				Not Qualified						e0	30	235
SN65LVDS95DGGRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100		EIA-644; TIA-644	110 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm		6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.5 mm		0 ns
AM26C31QDBR	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	125 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G16		2 mm		5.3 mm	Not Qualified					YES				6.2 mm	2 V	0 ns
DS9638CM/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES		2		BIPOLAR		20 ns	EIA-422		STANDARD	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000025 Amp		1.27 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e3	30	260	4.9 mm	2 V	0 ns
SN75LBC172ADWRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified					YES	e4	30	260	12.8 mm	1 V	0 ns
5962F7802302VFX	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	300k Rad(Si)	CERAMIC, GLASS-SEALED	YES	5.5 V	4		BIPOLAR	MIL-PRF-38535 Class V	15 ns	EIA-422; FED STD 1020		STANDARD	5 V	5.5 V			FLATPACK		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		DUAL	R-GDFP-F16		2.032 mm		6.604 mm	Qualified					YES				9.6645 mm
DS90UH301QSQ/NOPB	Texas Instruments	LINE DRIVER																																		NICKEL PALLADIUM GOLD			3										e4	30	260
SN75ALS194NE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		14 ns	V.11; EIA-422-B	45 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified	48 Amp	COMPLEMENTARY			YES	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	2 V	0 ns
THS6093CD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	7 V	2					GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		2.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY; LOW POWER SHUTDOWN MODE AVAILABLE	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
THS6093CDR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	7 V	2					GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		2.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY; LOW POWER SHUTDOWN MODE AVAILABLE	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
SN65LVDS95DGG	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		CMOS		13.38 ns	EIA-644; TIA-644	110 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm		6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.5 mm		0 ns
DS90UR910QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm		6 mm				1		YES	e3	30	260	6 mm
5962-9865101QFX	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	3.6 V	4		CMOS	MIL-PRF-38535 Class Q	3.5 ns	EIA-644; IEEE 1596.3		STANDARD	3.3 V	3.6 V			FLATPACK		3 V			3 V	1.27 mm	125 Cel	3.3 V		-55 Cel	4		DUAL	R-GDFP-F16		2.032 mm		6.35 mm	Qualified					YES
AM26C31MW	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3.2 mA	STANDARD	5 V		5		FLATPACK	FL16,.3		Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	125 Cel		3-STATE	-55 Cel	4		DUAL	R-PDFP-F16		2.03 mm		6.73 mm	Not Qualified		COMPLEMENTARY			YES				10.16 mm	2 V	0 ns
SN75130J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.95 V	1		BIPOLAR		37 ns	IBM 360/370	85 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel			0 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		COMMON FAULT FLAG	YES				19.56 mm		0 ns
SN75174DW-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		65 ns	V.11; X.27; EIA-422-A; EIA-485	60 mA	STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDSO-G20		2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES				12.8 mm
SN65LBC172DW	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		20 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.1 V	0 ns
5962-8688901DA	Texas Instruments	LINE DRIVER	MILITARY	FLAT	14	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	15 V	4		BIPOLAR	MIL-PRF-38535	350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	FLATPACK	FL14,.3	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	1.27 mm	125 Cel	9 V		-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F14		2.03 mm		6.285 mm	Qualified				1 SINGLE INPUT DRIVER	NO	e0	NOT SPECIFIED	NOT SPECIFIED	9.21 mm	12 V	0 ns
SN65LBC172ADWG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.