LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS90CR214MTD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4					EIA-644; TIA-644		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.5 mm	70 Cel			-10 Cel			DUAL	R-PDSO-G48		1.1 mm		6.1 mm				4						12.5 mm
DS90UR905QSQ	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		UNSPECIFIED	YES	1.89 V	1			AEC-Q100		I2C		DIFFERENTIAL	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.71 V	.5 mm	105 Cel			-40 Cel	1		QUAD	S-XQCC-N48		.8 mm		7 mm	Not Qualified			1		YES				7 mm
DS90UH927QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE		PLASTIC/EPOXY	YES		1			AEC-Q100			160 mA		3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm		6 mm	Not Qualified					NO	e3	30	260	6 mm		0 ns
SN75114DRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		30 ns	GENERAL PURPOSE	50 mA	GATED	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	1.55 V	0 ns
THS6182DG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	2					GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		5 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES WITH 24V SINGLE SUPPLY	NO	e4	30	260	9.9 mm		0 ns
SN75ALS194D3	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES		4		TTL		14 ns				5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G16										YES					2 V
DS90CR483AVJDX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE		PLASTIC/EPOXY	YES		4				100 ns		210 mA		3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers	.00001 Amp		.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G100	3	1.2 mm		14 mm	Not Qualified		COMPLEMENTARY	8		YES	e4	30	260	14 mm	2.7 V	0 ns
DS90LV027MX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	2		CMOS		6 ns	EIA-644	11 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4.9 mm	.25 V	0 ns
SN75ALS172ADWRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		22 ns	EIA-422-B; TIA-422-B; EIA-485; V.11		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified					YES	e4	30	260	12.8 mm	1.5 V	0 ns
THS6043IPWP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	HTSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	2	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V		-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		5 V			5 V	.65 mm	85 Cel	12 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.2 mm	.35 A	4.4 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm		0 ns
THS6182DWP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	HSOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	2	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V	+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG	SOP20,.4	5 V	Line Driver or Receivers		5 V	1.27 mm	85 Cel	12 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	2	2.65 mm	.6 A	7.52 mm	Not Qualified		TRUE		ALSO OPERATES WITH 24V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	12.825 mm		0 ns
SN65MLVD047PWRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.4 ns	EIA-899; TIA-899	70 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified		TRUE			YES	e4	30	260	5 mm	.48 V	0 ns
SN65MLVD047DRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.4 ns	EIA-899; TIA-899		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified					YES	e4	30	260	9.9 mm	.48 V	0 ns
5962F7802301Q2A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	300k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4			MIL-PRF-38535 Class Q	30 ns	EIA-422; FED STD 1020		STANDARD	5 V				CHIP CARRIER					4.5 V	1.27 mm	125 Cel			-55 Cel	4		QUAD	S-CQCC-N20		1.91 mm		8.89 mm	Not Qualified					YES				8.89 mm
DS90C241QVS	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		GENERAL PURPOSE		STANDARD	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel	24	TIN LEAD	QUAD	S-PQFP-G48	1	1.2 mm		7 mm						YES	e0	30	235	7 mm
AM26C31CNSRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel	5 V	DIFFERENTIAL	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified	20 Amp	COMPLEMENTARY			YES	e4	30	260	10.2 mm	2 V	0 ns
SN75109AN-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		15 ns	GENERAL PURPOSE	30 mA	GATED	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm		0 ns
AM26C31CNSRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm	2 V	0 ns
SN75ALS194D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		14 ns	EIA-422-A		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES				9.9 mm
DS90LV031AWGQML	Texas Instruments	LINE DRIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	3.6 V	4		CMOS	MIL-PRF-38535 Class Q	3.5 ns	EIA-644; TIA-644; IEEE P1596.3		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	125 Cel		3-STATE	-55 Cel	4	Tin/Lead (Sn63Pb37)	DUAL	R-GDSO-G16	1	2.3368 mm		6.35 mm	Not Qualified					YES	e0	40	260		.25 V	0 ns
THS6204IPWP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	28 V	1	2	BIPOLAR			GENERAL PURPOSE	22 mA	DIFFERENTIAL	12 V	14 V	+-6/+-12	-6 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	5 V	Line Driver or Receivers		10 V	.65 mm	85 Cel	6 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	2	1.2 mm	.416 A	4.4 mm	Not Qualified		COMPLEMENTARY			NO	e4	30	260	7.8 mm		0 ns
DS90LV031AMDC	Texas Instruments	LINE DRIVER		NO LEAD		DIE	UNSPECIFIED		UNSPECIFIED	YES	3.6 V	4		CMOS		2 ns	EIA-644; TIA-644; IEEE 1596.3		STANDARD	3.3 V				UNCASED CHIP					3 V						4		UPPER	X-XUUC-N					Not Qualified					YES
DS90CR583MTD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES		5		CMOS			EIA-644; TIA-644		STANDARD	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers			.5 mm	70 Cel			-10 Cel	5	TIN LEAD	DUAL	R-PDSO-G56	2	1.2 mm		6.1 mm	Not Qualified		COMPLEMENTARY			YES	e0		235	14 mm		0 ns
SN75150DRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	13.2 V	2		BIPOLAR		.2 ns	EIA-232-E; V.28		STANDARD	12 V		+-12	-12 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified				PROGRAMMABLE SLEW RATE	NO	e4	30	260	4.9 mm	10 V	0 ns
DS90UR241QVS	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		ISO 10605		STANDARD	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel	24	TIN LEAD	QUAD	S-PQFP-G48	1	1.2 mm		7 mm						YES	e0	30	235	7 mm
DS14C88N	Texas Instruments	LINE DRIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	12.6 V	4		CMOS		6000 ns	EIA-232-D; V.28		GATED	9 V		+-4.5/+-12	-9 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	75 Cel			0 Cel	4	TIN LEAD	DUAL	R-PDIP-T14	1	5.334 mm		7.62 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e0			19.05 mm	6 V	0 ns
SN65LVDS047DG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.8 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		TRUE			YES	e4	30	260	9.9 mm	.25 V	0 ns
DS90LV027M/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	2		CMOS		6 ns	EIA-644	11 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.01 Amp	COMPLEMENTARY			YES	e3	30	260	4.9 mm	.25 V	0 ns
DS90C031BTMX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4		CMOS		3.5 ns	EIA-644; TIA-644		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified					YES	e0	20	235	9.9 mm	.25 V	0 ns
MC3453FK	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	4				15 ns	GENERAL PURPOSE		STANDARD	5 V			-5 V	CHIP CARRIER					4.5 V	1.27 mm	70 Cel			0 Cel	4		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Not Qualified					YES				8.89 mm		0 ns
SN65LVDS305ZQER	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE		PLASTIC/EPOXY	YES	1.95 V	1		CMOS			GENERAL PURPOSE	18.8 mA	STANDARD	1.8 V	1.95 V	1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20	1.65 V	Line Driver or Receivers	.00002 Amp	1.65 V	.5 mm	85 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B80	3	1 mm		5 mm	Not Qualified		COMPLEMENTARY	2		YES	e1	30	260	5 mm		0 ns
DS90UR910SQE/NOPB	Texas Instruments	LINE DRIVER
THS6043IPWPR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	HTSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	2	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V		-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		5 V			5 V	.65 mm	85 Cel	12 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.2 mm	.35 A	4.4 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm		0 ns
SN75LVDS9638DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	2		CMOS		6 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	4.9 mm	.247 V	0 ns
LMH0356SQE	Texas Instruments	LINE DRIVER																																		TIN LEAD			2										e0	30	235
SN75LVDS389DBT	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	38	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	8		CMOS		2.9 ns	EIA-644; TIA-644	70 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V	3-STATE	0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	2	1.2 mm		4.4 mm	Not Qualified		TRUE			YES	e4	30	260	9.7 mm	.247 V	0 ns
THS6012IDWPR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	HSOP	RECTANGULAR		PLASTIC/EPOXY	YES	33 V	2	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V	16 V		-5 V	SMALL OUTLINE, HEAT SINK/SLUG		4.5 V			9 V	1.27 mm	85 Cel	15 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	2	2.65 mm	.5 A	7.52 mm	Not Qualified				9V TO 32V SINGLE SUPPLY OPERATION ALSO POSSIBLE	NO	e4	30	260	12.825 mm		0 ns
SN75LBC172DWR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		20 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified	.06 Amp	COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
SN75LVDS31PWG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		6 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified					YES	e4	30	260	5 mm	.247 V	0 ns
5962-9762101Q2A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	HQCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4		CMOS	MIL-PRF-38535 Class Q	4.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG	LCC20,.35SQ	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	125 Cel	3.3 V	3-STATE	-55 Cel	4	TIN LEAD	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified		TRUE			YES	e0			8.89 mm	.454 V	0 ns
DS90UB903QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE	90 mA	STANDARD	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm		6 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
SN65LVDS1DG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		TTL		3.1 ns	EIA-644-A; TIA-644-A	8 mA	STANDARD	3.3 V	3.6 V	2.5/3.3		SMALL OUTLINE	SOP8,.25	2.4 V	Line Driver or Receivers	.00002 Amp	2.4 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.02 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	.247 V	3.6 ns
THS6042CDDARG3	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	HLSOP	RECTANGULAR		PLASTIC/EPOXY	YES	15 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE					5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
THS6204IPWPG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	28 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-6/+-12		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		Line Driver or Receivers		10 V	.65 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	2	1.2 mm		4.4 mm	Not Qualified					NO	e4	30	260	7.8 mm		0 ns
THS6053IDRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
5962-9583301Q2X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		CMOS	MIL-PRF-38535 Class Q	5 ns	IEEE 1596.3		STANDARD	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20		1.91 mm		8.89 mm	Qualified					YES				8.89 mm
DS90CR215MTDX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	3		CMOS			EIA-644; TIA-644	55 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	3		DUAL	R-PDSO-G48		1.1 mm		6.1 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	12.5 mm		0 ns
SN75153J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	1		BIPOLAR		30 ns	EIA-422-A; FED STD 1020	80 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.56 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.