LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75ALS194DP3	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	TTL		14 ns				5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G16									YES					2 V
SN65LVDS151DA	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	32	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		5.8 ns	EIA-644-A; TIA-644-A	65 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP32,.3	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G32	2	1.2 mm	6.2 mm	Not Qualified	.02 Amp	TRUE			YES	e4	30	260	11 mm		0 ns
SN75159DG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		25 ns	EIA-422-B; TIA-422-B; V.11	65 mA	GATED	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	8.65 mm	2 V	0 ns
SN75LVDS391PWG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		2.9 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	70 Cel	3.3 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified		TRUE			YES	e4	30	260	5 mm	.247 V	0 ns
DS90LV031ATMTCX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		2 ns	EIA-644; TIA-644; IEEE 1596.3		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified					YES	e0		260	5 mm	.25 V	0 ns
DS90UH927QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100			160 mA		3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified					NO	e3	30	260	6 mm		0 ns
DS90UH925QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1		AEC-Q100		ISO 10605	170 mA	STANDARD	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	24	Matte Tin (Sn)	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e3	NOT SPECIFIED	260	7 mm		0 ns
SN75151N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		30 ns	EIA-422-B; FED STD 1020	80 mA	STANDARD	5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T20		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY		ADDITIONAL COMMON ENABLE INPUT	YES		NOT SPECIFIED	NOT SPECIFIED	24.325 mm	2 V	0 ns
LMH0002SQ/S250	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1				GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers		3.135 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	1	.8 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm	.75 V	0 ns
SN65LVDS9638DG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	4.9 mm	.247 V	0 ns
SN65LVDS307ZQCR	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	48	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1	CMOS			GENERAL PURPOSE	25.8 mA	STANDARD	1.8 V	1.95 V	1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA48,7X7,20	1.65 V	Line Driver or Receivers	.00002 Amp	1.65 V	.5 mm	85 Cel	1.8 V	DIFFERENTIAL	-40 Cel	2	TIN SILVER COPPER	BOTTOM	S-PBGA-B48	3	1 mm	4 mm	Not Qualified		COMPLEMENTARY			YES	e1	30	260	4 mm		0 ns
DS90C241IVS	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		GENERAL PURPOSE		STANDARD	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel	24	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified					YES	e0			7 mm
SN75ALS191PSRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	TTL		7 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE	SOP8,.3		Line Driver or Receivers	.000025 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm	5.3 mm	Not Qualified					YES	e4	30	260	6.2 mm	2 V	0 ns
V62/07611-01XE	Texas Instruments	LINE DRIVER	MILITARY	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BICMOS		16 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified		TRUE			YES	e4	30	260	12.8 mm	.8 V	0 ns
SN75ALS194J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	4	BIPOLAR		14 ns	EIA-422-A		STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.56 mm
SN75188DE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4	BIPOLAR		350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	SMALL OUTLINE	SOP14,.25	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	1.27 mm	70 Cel	9 V	TOTEM-POLE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO	e4	NOT SPECIFIED	260	8.65 mm	12 V	0 ns
MC1488N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	1	BIPOLAR		175 ns	EIA-232-C	34 mA	GATED	9 V			-9 V	IN-LINE					7.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	4		DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER; PROGRAMMABLE SLEW RATE	NO				19.305 mm
SN75LBC174DWG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BICMOS		20 ns	EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified					YES	e4	30	260	12.8 mm	1.5 V	0 ns
DS90CR217MTDX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644; TIA-644	57 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	3	TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified					YES	e0	20	235	12.5 mm		0 ns
UA9638ACP-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		15 ns	EIA-422-A	65 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				9.81 mm		0 ns
SN65LBC172DWG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BICMOS		20 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.1 V	0 ns
DS90CR485VS/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	2.62 V	8				EIA-644; TIA-644	105 mA	STANDARD	2.5 V	3.46 V	2.5,2.5/3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	2.37 V	Line Driver or Receivers		2.37 V	.5 mm	70 Cel	2.5 V	3-STATE	-10 Cel	9	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified		TRUE			YES	e4	NOT SPECIFIED	260	14 mm		0 ns
DS90UA101TRTVJQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100					1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm	5 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	5 mm		0 ns
SN75ALS126D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.95 V	2	BIPOLAR		28 ns	IBM 360/370		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	2.96 V	0 ns
DS91M125TMA	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			8.5 ns	EIA-422; TIA-422; EIA-485; TIA-485		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	4		DUAL	R-PDSO-G16		1.753 mm	3.899 mm	Not Qualified			1		YES		NOT SPECIFIED	NOT SPECIFIED	9.902 mm		8.5 ns
SN75LVDS9638DRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS		6 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	4.9 mm	.247 V	0 ns
THS6092IDDAG3	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	7 V	2				GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers		2.5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G8		1.68 mm	3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
SN75ALS194NSRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		14 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm	2 V	0 ns
THS6053CDG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
5962-7802302VEA	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR	MIL-PRF-38535 Class V	25 ns	EIA-422; FED STD 1020		STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified				LG_MAX; SEATED HGT-NOM	YES				19.94 mm
5962-9076502MFA	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4	BIPOLAR	MIL-STD-883	25 ns	EIA-485		STANDARD	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel			-55 Cel	4		DUAL	R-GDFP-F16		2.032 mm	6.604 mm	Not Qualified					YES				9.6645 mm
5962-7802302MFA	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4	BIPOLAR	MIL-STD-883	25 ns	EIA-422; FED STD 1020	40 mA	STANDARD	5 V	5.5 V			FLATPACK		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4	TIN LEAD	DUAL	R-GDFP-F16	1	2.032 mm	6.73 mm	Qualified				LG_MAX	YES	e0			10.16 mm
SN75C198DB-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	1	BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V			-12 V	SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		INVERTED		2 SINGLE INPUT DRIVERS	NO				6.2 mm
DS90LV027AQMA	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			2 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G8	1		3.9 mm	Not Qualified					YES	e0	30	235	4.9 mm
DS90LV017ATMX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			1.5 ns	EIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					YES	e0	20	235	4.9 mm	.25 V	0 ns
LMH0050SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	5				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm						NO	e3	30	260	7 mm		0 ns
5962-7802301MEX	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR	MIL-STD-883	30 ns	GENERAL PURPOSE		STANDARD	5 V	5.5 V			IN-LINE		4.5 V			4.5 V	2.54 mm	125 Cel	5 V		-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Qualified					YES				19.43 mm
THS6053IDG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	30	260	8.65 mm		0 ns
DS90CF383MTD/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	CMOS			EIA-644; TIA-644	55 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	14 mm	2.7 V	0 ns
MC3453J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1	BIPOLAR		15 ns	GENERAL PURPOSE	50 mA	STANDARD	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel	4		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.56 mm		0 ns
5962-8776901EX	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	2	BIPOLAR		50 ns	GENERAL PURPOSE		GATED	5 V				IN-LINE					4.75 V		125 Cel			-55 Cel	2		DUAL	R-GDIP-T16				Not Qualified					NO						0 ns
SN75111N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		15 ns	GENERAL PURPOSE	40 mA	STANDARD	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel	4		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm		0 ns
DS90LV027M	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS		6 ns	EIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					YES	e0	20	235	4.9 mm	.25 V	0 ns
AM26LS31PC	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		15 ns	EIA-422; FED STD 1020		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDIP-T16	1	4.318 mm	7.62 mm	Not Qualified					YES	e0			19.05 mm	2 V	0 ns
5962-8754701DX	Texas Instruments	LINE DRIVER	MILITARY	FLAT	14	QFF	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2	BIPOLAR	MIL-STD-883	25 ns	V.35		GATED	5 V	5.25 V		-5 V	FLATPACK		4.75 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	2	TIN LEAD	DUAL	R-GDFP-F14		2.03 mm	6.285 mm	Qualified				HIGH DRIVE	YES	e0	NOT SPECIFIED	NOT SPECIFIED	9.21 mm
DS90CF581MTD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSOP2	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-644; TIA-644		STANDARD	5 V				SMALL OUTLINE, THIN PROFILE					4.5 V	.5 mm	70 Cel			-10 Cel	4		DUAL	R-PDSO-G56		1.1 mm	6.1 mm						YES				14 mm
SN65LV1023ADBG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			10 ns	GENERAL PURPOSE	70 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	10.2 mm		0 ns
SN75ALS174ADWRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		22 ns	EIA-422-B; TIA-442-B; EIA-485	55 mA	STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.