LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN65MLVD204BD	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				3.5 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE	SOP8,.25	3 V		.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.895 mm			COMPLEMENTARY	1		YES	e4	30	260	4.905 mm		10 ns
DRV1101U/2K5G4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	4.9 mm	8.5 V	0 ns
EL5171ISZ-T7	Renesas Electronics	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1					GENERAL PURPOSE		DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.375 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.7272 mm	3.9116 mm	Not Qualified					YES	e3	30	260	4.9022 mm		0 ns
HI-8382C-M-01	Holt Integrated Circuits	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.25 V	1		CMOS		3000 ns	ARINC 429		DIFFERENTIAL	5 V	15 V	5,+-12/+-15		IN-LINE	DIP16,.3	12 V	Line Driver or Receivers	.000001 Amp	4.75 V	2.54 mm	125 Cel			-55 Cel	1	TIN LEAD	DUAL	R-CDIP-T16		5.08 mm	7.62 mm	Not Qualified					YES	e0			20.57 mm	9.5 V	0 ns
HI-8382C-M-03	Holt Integrated Circuits	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.25 V	1		CMOS		3000 ns	ARINC 429		DIFFERENTIAL	5 V	15 V	5,+-12/+-15		IN-LINE	DIP16,.3	12 V	Line Driver or Receivers	.000001 Amp	4.75 V	2.54 mm	125 Cel			-55 Cel	1	TIN LEAD	DUAL	R-CDIP-T16		5.08 mm	7.62 mm	Not Qualified					YES	e0			20.57 mm	9.5 V	0 ns
MAX203EWP	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	2	INTERNAL CHARGE PUMP	NO	e0		245	12.8 mm	10 V	10000 ns
SN75LVDS84ADGGR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	39 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE			YES	e4	30	260	12.5 mm		0 ns
TLC59213AIPWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	8	8	BICMOS		250 ns	GENERAL PURPOSE	13 mA	STANDARD	5.5 V	13.2 V	4.5/13.2		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	4.5 V	Display Drivers		4.5 V	.65 mm	85 Cel			-40 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified		TRUE			NO	e4	30	260	6.5 mm		0 ns
ADA4312-1ACPZ-R7	Analog Devices	LINE DRIVER																																	MATTE TIN			3									e3	30	260			0 ns
DS3487N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		4		BIPOLAR		15 ns	EIA-422		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00005 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDIP-T16	1	5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES	e0		260	19.304 mm	2 V	0 ns
DS90C387AVJD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644		STANDARD	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	8	TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified					YES	e0		260	14 mm		0 ns
DS90UB949ATRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	3			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	1.1 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.045 V	.5 mm	105 Cel	1.8 V		-40 Cel	3	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm					ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.71 TO 1.89 V	YES	e4	30	260	9 mm
DS90UH949TRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	2			AEC-Q100		I2C	330 mA	DIFFERENTIAL	1.1 V	1.155 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.045 V	Line Driver or Receivers		1.045 V	.5 mm	105 Cel	1.1 V	DIFFERENTIAL	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N64	3	1 mm	9 mm	Not Qualified		COMPLEMENTARY		ALSO REQ 1.71 TO 1.89V AND 3.135 TO 3.465V	YES	e4	30	260	9 mm
LMH0302SQE	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.135 V	.65 mm	85 Cel			-40 Cel	1		QUAD	S-XQCC-N16		.8 mm	4 mm						YES				4 mm
MAX9112ESA	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel			-40 Cel	2	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					YES	e0			4.9 mm	.25 V	0 ns
MAX9112ESA+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel			-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	4.9 mm	.25 V	0 ns
SN75183DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00012 Amp	4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	1.3 V	0 ns
SN75183DRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00012 Amp	4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	1.3 V	0 ns
SN75183DRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE		GATED	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00012 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	1.3 V	0 ns
ADN4661BRZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	4.9 mm	.25 V	0 ns
AM26C31QDG4	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	20 Amp				YES	e4	30	260	9.9 mm	2 V	0 ns
DEI1071A-SES-G	Device Engineering	LINE DRIVER	OTHER	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	1		BIPOLAR			ARINC 429		DIFFERENTIAL	15 V			-15 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE					9.5 V	1.27 mm	85 Cel			-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	3	1.55 mm	3.89 mm	Not Qualified					YES	e4	40	260	4.9 mm		0 ns
DRV1100U/2K5	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	2	1.75 mm	3.9 mm	Not Qualified					YES	e4	30	260	4.9 mm		0 ns
DS90C031TM	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		3.5 ns	EIA-644; TIA-644; IEEE 1596.3		STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		TRUE			YES	e0	20	235	9.9 mm	.25 V	0 ns
DS90C365AMTX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS			EIA-644; TIA-644	60 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	3	MATTE TIN	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	12.5 mm		0 ns
DS90LV011ATMFX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		1.5 ns	EIA-644-A; TIA-644-A			3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37		Line Driver or Receivers	.00001 Amp	3 V	.95 mm	85 Cel		3-STATE	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G5	1	1.19 mm	1.6 mm	Not Qualified					YES	e0		260	2.92 mm	.25 V	0 ns
ISL32172EIBZ-T	Renesas Electronics	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		15 ns	EIA-422		STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	3	1.75 mm	3.9 mm					CAN ALSO OPERATE FROM VCC=3 TO 3.6V	YES	e3	30	260	9.9 mm
LMH0002SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1					GENERAL PURPOSE	49 mA	DIFFERENTIAL	3.3 V	3.399 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.201 V	Line Driver or Receivers		3.135 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	1	.8 mm	4 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4 mm	.75 V	0 ns
MAX208CAG	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified		INVERTED	4	EXTERNAL CHARGE PUMP	NO	e0		245	8.2 mm	10 V	10000 ns
MAX208CAG+	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified		INVERTED	4	EXTERNAL CHARGE PUMP	NO	e3	30	260	8.2 mm	10 V	10000 ns
MAX208CWG	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	4	EXTERNAL CHARGE PUMP	NO	e0	20	245	15.4 mm	10 V	10000 ns
MAX208CWG+	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	4	EXTERNAL CHARGE PUMP	NO	e3	30	260	15.4 mm	10 V	10000 ns
SN65MLVD206BDR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				3.5 ns	EIA-899; TIA-899		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE		3 V			3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.895 mm				1		YES	e4	30	260	4.905 mm		10 ns
SN75ALS174APWR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4				22 ns	EIA-422-B; TIA-422-B; EIA-485	55 mA	STANDARD	5 V	5.25 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4.75 V			4.75 V	.65 mm	70 Cel	5 V		0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm						YES	e4	30	260	6.5 mm
SN75ALS192N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		14 ns	EIA-422-B; TIA-422-B; V.11	45 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	2 Amp	COMPLEMENTARY			YES	e4			19.305 mm	2 V	0 ns
SN75LBC172A16DWR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified		TRUE			YES	e4	30	260	10.3 mm	1 V	0 ns
SN75LBC172A16DWRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	DIFFERENTIAL	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	10.3 mm	1 V	0 ns
SN75LBC172ADW	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1 V	0 ns
SN75LVDS391PWR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.9 ns	EIA-644; TIA-644	26 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	70 Cel	3.3 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified		TRUE			YES	e4	30	260	5 mm	.247 V	0 ns
SN75LVDS391PWRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.9 ns	EIA-644; TIA-644	26 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	70 Cel	3.3 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified		TRUE			YES	e4	NOT SPECIFIED	260	5 mm	.247 V	0 ns
UA9638CP	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		20 ns	EIA-422-B; TIA-422-B	65 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES	e4			9.81 mm	2 V	0 ns
65LBC174AM16DWREP	Texas Instruments	LINE DRIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		16 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	125 Cel			-55 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm						YES	e4	30	260	10.3 mm
AM26C31INSRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm	2 V	0 ns
AM26LS31MJB	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4		BIPOLAR	MIL-STD-883 Class B	30 ns	EIA-422-B; TIA-422-B; V.11	80 mA	STANDARD	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	2.54 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	20 Amp				YES	e0			19.305 mm	2 V	0 ns
DRV1100PG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel			-40 Cel	1		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	9.81 mm		0 ns
DRV1100U/2K5G4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	2	1.75 mm	3.9 mm	Not Qualified					YES	e4	30	260	4.9 mm		0 ns
DS90C387VJDX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS			EIA-644; TIA-644	210 mA	STANDARD	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	9	TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified					YES	e0		260	14 mm		0 ns
DS90UR241QVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			105 mA		3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7 mm	2 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.