LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX3041EWE-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS		1500 ns	EIA-422; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified					YES	e0			10.3 mm	1.5 V	0 ns
MAX3041EWE+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS		1500 ns	EIA-422; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified					YES	e3			10.3 mm	1.5 V	0 ns
SN65LV1023ARHBT	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				103 ns	GENERAL PURPOSE	70 mA	STANDARD	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32	2	1 mm	5 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	5 mm		0 ns
SN65LVDM31DR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.9 ns	GENERAL PURPOSE	40 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e4	30	260	9.9 mm	.27 V	0 ns
SN65LVDS315RGER	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1					GENERAL PURPOSE	13.3 mA	STANDARD	1.8 V	1.95 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	1.65 V	Line Driver or Receivers	.000002 Amp	1.65 V	.5 mm	85 Cel	1.8 V	DIFFERENTIAL	-40 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	3	1 mm	4 mm	Not Qualified		COMPLEMENTARY		DUMMY VAL	YES	e4	30	260	4 mm		0 ns
ADA4937-1YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	1 mm	3 mm	Not Qualified					YES	e3		260	3 mm		0 ns
DS26C31TN/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4		CMOS		11 ns	EIA-422		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.000001 Amp	4.5 V	2.54 mm	85 Cel		3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDIP-T16	1	4.318 mm	7.62 mm	Not Qualified					YES	e3			19.05 mm		0 ns
DS90C387VJDX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644	210 mA	STANDARD	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	8	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	14 mm		0 ns
DS90CF383BMTX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	60 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	4	MATTE TIN	DUAL	R-PDSO-G56	2	1.1 mm	6.1 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	14 mm	2.7 V	0 ns
HI-8570PST	Holt Integrated Circuits	LINE DRIVER	MILITARY	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.3 V	2		CMOS			ARINC 429		STANDARD	5 V		+-5	-5 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers	.0000001 Amp	4.8 V	1.27 mm	125 Cel			-55 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.626 mm	3.9 mm	Not Qualified					YES	e0	30	240	4.915 mm	9 V	0 ns
MAX208CWG-T	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	4	EXTERNAL CHARGE PUMP	NO	e0	20	245	15.4 mm	10 V	10000 ns
MAX208CWG+T	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	4	EXTERNAL CHARGE PUMP	NO	e3	30	260	15.4 mm	10 V	10000 ns
MAX208CWG/TR	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel	4		DUAL	R-PDSO-G24		2.65 mm	7.5 mm				4	EXTERNAL CHARGE PUMP	NO				15.4 mm		10000 ns
SN65LVDS9638DGNRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm	3 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	3 mm	.247 V	0 ns
SN65MLVD204BDR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				3.5 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE	SOP8,.25	3 V		.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.895 mm			COMPLEMENTARY	1		YES	e4	30	260	4.905 mm		10 ns
SN75174DW	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		65 ns	EIA-422-B; TIA-422-B; EIA-485; V.11	60 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
SN75188N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	4		BIPOLAR		350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	IN-LINE	DIP14,.3	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	2.54 mm	70 Cel	9 V	TOTEM-POLE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified	.01 Amp	INVERTED		1 SINGLE INPUT DRIVER	NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	12 V	0 ns
UA9638CDG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		20 ns	EIA-422-B; TIA-422-B	65 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	2	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	4.9 mm	2 V	0 ns
ADA4937-2YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified			2		YES	e3		260	4 mm		0 ns
AM26LS31MJ	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	2 V	0 ns
AMIS39100PNPB3G	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	8					GENERAL PURPOSE		STANDARD	3.3 V		3.3/5		SMALL OUTLINE	SOP28,.4		Peripheral Drivers		3.1 V	1.27 mm	105 Cel			-40 Cel	8	TIN	DUAL	R-PDSO-G28	2	2.6416 mm	7.52 mm	Not Qualified					NO	e3	30	260	17.8816 mm		0 ns
DS90C387VJD/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644	210 mA	STANDARD	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	8	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	14 mm		0 ns
HI-8571PST	Holt Integrated Circuits	LINE DRIVER	MILITARY	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.3 V	2		CMOS			ARINC 429		STANDARD	5 V		+-5	-5 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers	.0000001 Amp	4.8 V	1.27 mm	125 Cel			-55 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.626 mm	3.9 mm	Not Qualified					YES	e0		260	4.915 mm	9 V	0 ns
ISL32174EFVZ-T	Renesas Electronics	LINE DRIVER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		15 ns	EIA-422		STANDARD	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.65 mm	125 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	2	1.2 mm	4.4 mm					CAN ALSO OPERATE FROM VCC=3 TO 3.6V	YES	e3	30	260	5 mm
LTC1688IS	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4				12 ns	EIA-422; EIA-485		STANDARD	5 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e0			9.9 mm
LTC486ISW#PBF	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS		50 ns	EIA-422; EIA-485		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	2.642 mm	7.493 mm	Not Qualified					YES	e3	30	260	10.299 mm
MAX3042BEUE-T	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS		1500 ns	EIA-422; EIA-485		STANDARD	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		4.75 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e0			5 mm	1.5 V	0 ns
MAX3042BEUE+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS		1500 ns	EIA-422; EIA-485		STANDARD	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		4.75 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e3	30	260	5 mm	1.5 V	0 ns
MC3487NE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	85 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified					YES	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	2 V	0 ns
SN65HVDA195QDRQ1	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	1		AEC-Q100			7.5 mA			27 V			SMALL OUTLINE		7 V				1.27 mm	125 Cel	14 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.91 mm	Not Qualified	.005 Amp	TRUE	1		NO	e4	30	260	4.9 mm		600 ns
SN65LV1023ARHBR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				103 ns	GENERAL PURPOSE	70 mA	STANDARD	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32	2	1 mm	5 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	5 mm		0 ns
SN65LV1023ARHBRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1					GENERAL PURPOSE	70 mA	STANDARD	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32	2	1 mm	5 mm	Not Qualified			1		YES	e4	30	260	5 mm		0 ns
SN65LVDS391PWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.9 ns	EIA-644; TIA-644	26 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified		TRUE			YES	e4	30	260	5 mm	.247 V	0 ns
SN65LVDS93AZQLR	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	56	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					GENERAL PURPOSE	116 mA	STANDARD	3.3 V	3.6 V	3.3		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA56,6X10,25	3 V	Line Driver or Receivers	.000025 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	TIN SILVER COPPER	BOTTOM	R-PBGA-B56	2	1 mm	4.5 mm	Not Qualified		COMPLEMENTARY			YES	e1	30	260	7 mm		0 ns
SN65LVDS9638DGKG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	3 mm	.247 V	0 ns
THS6184PWPRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16 V	1					GENERAL PURPOSE		STANDARD	12 V		+-4/+-16	-12 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		4 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	2	1.2 mm	4.4 mm	Not Qualified					NO	e4	30	260	6.5 mm		0 ns
ADA4938-1ACPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	1					GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	1 mm	3 mm	Not Qualified					YES	e3		260	3 mm		0 ns
AM26LV31CDE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	.1 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel	3.3 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified				BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	9.9 mm	.95 V	0 ns
DS25BR150TSD/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.6 V	1				.465 ns	GENERAL PURPOSE	35 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-XDSO-N8	3	.8 mm	3 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	3 mm		0 ns
DS25BR150TSDX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.6 V	1				.465 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-XDSO-N8	3	.8 mm	3 mm	Not Qualified					YES	e3	30	260	3 mm		0 ns
DS26C31TN	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4		CMOS		11 ns	EIA-422		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.000001 Amp	4.5 V	2.54 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDIP-T16	1	4.318 mm	7.62 mm	Not Qualified					YES	e0			19.05 mm		0 ns
DS90C383BMTX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	50 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		-10 Cel	4	MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified					YES	e3	30	260	14 mm		0 ns
DS90C387VJD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644	210 mA	STANDARD	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	8	Tin/Lead (Sn/Pb)	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified		COMPLEMENTARY			YES	e0	NOT SPECIFIED	260	14 mm		0 ns
DS90LV011ATMF	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		1.5 ns	EIA-644-A; TIA-644-A			3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP5/6,.11,37	3 V	Line Driver or Receivers	.00001 Amp	3 V	.953 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G5	1	1.19 mm	1.6 mm	Not Qualified		TRUE			YES	e0	NOT SPECIFIED	260	2.92 mm	.25 V	0 ns
DS90LV027ATM	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e0	20	235	4.9 mm	.25 V	0 ns
DS90LV027ATM/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	.01 Amp	COMPLEMENTARY			YES	e3	30	260	4.9 mm	.25 V	0 ns
LMH0307SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.465 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.135 V	Line Driver or Receivers		3.135 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm	4 mm	Not Qualified		TRUE			YES	e3	30	260	4 mm	.72 V	0 ns
MAX3030EEUE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		BICMOS		16 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e0			5 mm	2 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.