LINE DRIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
LMH0303SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE	57 mA	DIFFERENTIAL	3.3 V	3.46 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.13 V	Line Driver or Receivers		3.135 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm		4 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4 mm	.72 V	0 ns
THS6012IDWP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	20	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	33 V	2	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V	16 V		-5 V	SMALL OUTLINE, HEAT SINK/SLUG		4.5 V			9 V	1.27 mm	85 Cel	15 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	2	2.65 mm	.5 A	7.52 mm	Not Qualified				9V TO 32V SINGLE SUPPLY OPERATION ALSO POSSIBLE	NO	e4	30	260	12.825 mm		0 ns
DRV134UA/1KE4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	1					GENERAL PURPOSE		STANDARD	18 V		+-18	-18 V	SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.001 Amp	4.5 V	1.27 mm					1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	3	2.65 mm		7.5 mm	Not Qualified					YES	e4	30	260	10.3 mm		0 ns
SN65LBC174A16DW	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm		7.5 mm	Not Qualified					YES	e4	30	260	10.3 mm	1 V	0 ns
FIN1031MTCX	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				2 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified					YES	e4	30	260	5 mm	.25 V
SN75ALS194DE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		14 ns	V.11; EIA-422-B		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9.9 mm	2 V	0 ns
AM26LS31INSR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4		BIPOLAR		20 ns	EIA-422-B	80 mA	STANDARD	5 V	5.5 V			SMALL OUTLINE		4.5 V				1.27 mm	85 Cel	5 V		-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2 mm		5.3 mm						YES	e4	30	260	10.2 mm
DRV1101U	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS		25 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	2	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	4.9 mm	8.5 V	0 ns
LTC1688IS#PBF	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4				12 ns	EIA-422; EIA-485		STANDARD	5 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm
SN75LVDS83ADGGR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			GENERAL PURPOSE	96.8 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	TSSOP56,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm		6.1 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	14 mm		0 ns
ADA4938-1ACPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	1					GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	1 mm		3 mm	Not Qualified					YES	e3		260	3 mm		0 ns
AM26C31IDBR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified	20 Amp				YES	e4	30	260	6.2 mm	2 V	0 ns
AM26LS31CDE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	80 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	20 Amp	COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	9.9 mm	2 V	0 ns
DS90UB928QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			250 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm				1		NO	e3	30	260	7 mm		0 ns
AM26LS31CNSRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm	2 V	0 ns
DS90LV047ATMTCX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified					YES	e0		260	5 mm	.25 V	0 ns
AM26C31CDBRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified	20 Amp				YES	e4	30	260	6.2 mm	2 V	0 ns
SN65LVDS9638DGKR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.1 mm		3 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	3 mm	.247 V	0 ns
SN65LVDS31MDREP	Texas Instruments	LINE DRIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.7 V	4		CMOS		4.5 ns	EIA-644; TIA-644; EIA-422-B; TIA-422-B	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	4 V	1.27 mm	125 Cel	3.3 V	DIFFERENTIAL	-55 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm			COMPLEMENTARY			YES	e4	30	260	9.9 mm	.247 V	0 ns
SN65LVDS31PW	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified		TRUE			YES	e4	NOT SPECIFIED	260	5 mm	.247 V	0 ns
MC1488N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	4		BIPOLAR		350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	IN-LINE	DIP14,.3	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	2.54 mm	70 Cel	9 V	TOTEM-POLE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	12 V	0 ns
SN75183N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V	5.25 V	5		IN-LINE	DIP14,.3	4.75 V	Line Driver or Receivers	.00012 Amp	4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified	40 Amp	COMPLEMENTARY			YES	e4			19.305 mm	1.3 V	0 ns
AD8138ARZ-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE					1.4 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified					YES	e3			4.9 mm
AD8138ARZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE					1.4 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified					YES	e3			4.9 mm
ADA4941-1YRZ	Analog Devices	LINE DRIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	1					GENERAL PURPOSE		DIFFERENTIAL	3 V				SMALL OUTLINE					2.7 V	1.27 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e3	30	260	4.9 mm		0 ns
SN65HVS880PWPRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	30 V	1				10 ns	GENERAL PURPOSE	8.7 mA	STANDARD	24 V		24		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		18 V	.65 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	2	1.2 mm		4.4 mm	Not Qualified						e4	30	260	9.7 mm		0 ns
AM26LS31CDG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	80 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	20 Amp				YES	e4	NOT SPECIFIED	260	9.9 mm	2 V	0 ns
MAX3294AUT+TCGD	Maxim Integrated	LINE DRIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1		BICMOS		1300 ns	EIA-422; EIA-485		STANDARD	3.3 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3.135 V	.95 mm	125 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G6	1	1.45 mm		1.625 mm						YES	e4	30	260	2.9 mm
AM26C31ID	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	20 Amp	COMPLEMENTARY			YES	e4	30	260	9.9 mm	2 V	0 ns
DS90UR908QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE	95 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	3.6 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm		7 mm	Not Qualified		TRUE			YES	e3	30	260	7 mm		0 ns
SN65LVDS387DGG	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	16		CMOS		2.9 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	16	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G64	2	1.2 mm		6.1 mm	Not Qualified		TRUE			YES	e4	30	260	17 mm	.247 V	0 ns
SN75174DWR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		65 ns	EIA-422-B; TIA-422-B; EIA-485; V.11	60 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
DS26C31TMX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		11 ns	EIA-422		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified					YES	e0	20	235	9.9 mm		0 ns
SN75174DWRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		65 ns	EIA-422-B; TIA-422-B; EIA-485; V.11	60 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
DS26LS31CM/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		15 ns	EIA-422; FED STD 1020	60 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	Matte Tin (Sn)	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		TRUE			YES	e3	NOT SPECIFIED	260	9.9 mm	2 V	0 ns
SN75172DWR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		65 ns	V.11; EIA-422-B; EIA-485	60 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified	.36 Amp	COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
DS90C385AMTX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	55 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	4	TIN LEAD	DUAL	R-PDSO-G56	2	1.1 mm		6.1 mm	Not Qualified					YES	e0	20	235	14 mm		0 ns
DS90LV047ATMTC	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified		TRUE			YES	e0		260	5 mm	.25 V	0 ns
SN65LVDS31DRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS		2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified		TRUE			YES	e4	NOT SPECIFIED	260	9.9 mm	.247 V	0 ns
MAX3295AUT/V+T	Analog Devices	LINE DRIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1		BICMOS	AEC-Q100	70 ns	EIA-422; EIA-485			3.3 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3.135 V	.95 mm	125 Cel			-40 Cel	1	NICKEL GOLD PALLADIUM	DUAL	R-PDSO-G6	1	1.45 mm		1.625 mm						YES		30	260	2.9 mm
DS90LV011AHMFX/NOPB	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		1.5 ns	EIA-644-A; TIA-644-A	10 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	3 V	Line Driver or Receivers	.00001 Amp	3 V	.95 mm	125 Cel	3.3 V	3-STATE	-40 Cel	1	Matte Tin (Sn)	DUAL	R-PDSO-G5	1	1.45 mm		1.6 mm	Not Qualified	.01 Amp	TRUE			YES	e3	NOT SPECIFIED	260	2.9 mm	.25 V	0 ns
SN75174DWRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		65 ns	EIA-422-B; TIA-422-B; EIA-485; V.11	60 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
ADA4941-1YCPZ-R2	Analog Devices	LINE DRIVER	AUTOMOTIVE	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	12 V	1					GENERAL PURPOSE		DIFFERENTIAL	3 V				SMALL OUTLINE					2.7 V	.5 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	S-XDSO-N8	3	.9 mm		3 mm	Not Qualified					YES	e3		260	3 mm		0 ns
L6374FP013TR	STMicroelectronics	LINE DRIVER	OTHER	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	35 V	4				1500 ns	GENERAL PURPOSE	5 mA	DIFFERENTIAL SCHMITT TRIGGER	24 V		24		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		10.8 V	1.27 mm	85 Cel		TOTEM-POLE	-25 Cel	4	MATTE TIN	DUAL	R-PDSO-G20	3	2.65 mm		7.5 mm	Not Qualified		TRUE			NO	e3	30	260	12.8 mm	35 V	0 ns
MC3487N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	85 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	2 V	0 ns
AM26C31CDR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	20 Amp	COMPLEMENTARY			YES	e4	30	260	9.9 mm	2 V	0 ns
DS90UB928QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			250 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm				1		NO	e3	30	260	7 mm		0 ns
HI-8382C-T	Holt Integrated Circuits	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.25 V	1		CMOS		3000 ns	ARINC 429		DIFFERENTIAL	5 V	15 V	5,+-12/+-15		IN-LINE	DIP16,.3	12 V	Line Driver or Receivers	.000001 Amp	4.75 V	2.54 mm	125 Cel			-55 Cel	1	GOLD	DUAL	R-CDIP-T16		5.08 mm		7.62 mm	Not Qualified					YES	e4			20.57 mm	9.5 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.