Onsemi Line Drivers & Receivers 588

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
FIN1031M	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			2 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm	.25 V	0 ns
FIN1031MTC	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			2 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified					YES	e3			5 mm	.25 V	0 ns
FIN1048MTC	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25				3 V	.65 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16		1.1 mm	4.4 mm		8 Amp		4		NO				5 mm		2.5 ns
FIN1531MTC	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			2 ns	EIA-644; TIA-644		STANDARD	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.65 mm	85 Cel			-40 Cel	4		DUAL	R-PDSO-G16		1.1 mm	4.4 mm						YES				5 mm
USB1T1103MPX	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	14	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	1	CMOS		18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V		1.8/3.3,3.3,5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1SQ,20		Line Driver or Receivers		4 V	.5 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N14	1	.8 mm	2.5 mm	Not Qualified	2 Amp		1		YES	e4	30	260	2.5 mm	2.5 V	15 ns
FIN1017MX	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					YES	e4	30	260	4.9 mm	.25 V
MC100EP16DTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.28 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.28 ns
NB7NPQ1404E2MMUTWG	Onsemi	LINE TRANSCEIVER																																NICKEL PALLADIUM GOLD			1									e4	30	260
USB1T1105AMHX	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	1	CMOS		18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V		1.8/3.3,3.3,5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers		4 V	.5 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N16	1	.8 mm	3 mm	Not Qualified	2 Amp		3		YES	e4	30	260	3 mm	2.5 V	18 ns
FIN1019MTC	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			1.5 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		1.2 mm	4.4 mm				1		YES				5 mm		2.5 ns
MC1489AP	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BIPOLAR			EIA-232-D	26 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	75 Cel			0 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T14		4.69 mm	7.62 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e0	NOT SPECIFIED	235	18.86 mm		85 ns
MC1488P	Onsemi	LINE DRIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	9.09 V	4	BIPOLAR		350 ns	EIA-232-D		GATED	9 V		+-9	-9 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp	8.91 V	2.54 mm	75 Cel			0 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T14		4.69 mm	7.62 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e0	30	235	18.48 mm	12 V	0 ns
FIN1215MTDX	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3				EIA-644; TIA-644	66 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified					YES	e4	30	260	12.5 mm
MC10115P	Onsemi	LINE RECEIVER	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		4	ECL			GENERAL PURPOSE	29 mA	DIFFERENTIAL			-5.2	-5.2 V	IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	85 Cel			-30 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16		4.44 mm	7.62 mm	Not Qualified			4		NO	e0	30	235	19.175 mm		2.9 ns
MC33199D	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				GENERAL PURPOSE		DIFFERENTIAL		20 V			SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	125 Cel			-40 Cel	1		DUAL	R-PDSO-G14		2.65 mm	7.5 mm	Not Qualified			1		NO				12.8 mm
AM26LS30PC	Onsemi	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		200 ns	EIA-422-A; EIA-423-A		STANDARD	5 V		5/+-5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDIP-T16		4.44 mm	7.62 mm	Not Qualified				CONFIGURABLE INTERFACE STANDARDS	YES	e0	30	235	19.175 mm	2 V	0 ns
FIN1019MX	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			1.5 ns	EIA-644; TIA-644	12.5 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e4	30	260	8.65 mm	.25 V	2.5 ns
FIN1032M	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		4			e3	30	260	9.9 mm		2.5 ns
FIN1032MX	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		4			e3	30	260	9.9 mm		2.5 ns
FIN1047MTC	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified					YES	e4	30	260	5 mm	.25 V	0 ns
FIN224ACMLX	Onsemi	LINE TRANSCEIVER	OTHER	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	3.3 V	1				GENERAL PURPOSE		DIFFERENTIAL	2.775 V	3.6 V	1.8/3.3,3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	1.65 V	Line Driver or Receivers		2.5 V	.5 mm	70 Cel	1.8 V		-30 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N40	1	.8 mm	6 mm	Not Qualified			1		YES	e4	30	260	6 mm
MC100EL16DG	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	1	ECL			GENERAL PURPOSE	26 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e3	30	260	4.9 mm		.325 ns
MC100EP16DG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.28 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.28 ns
MC100LVEL16DG	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1	ECL			GENERAL PURPOSE	24 mA	DIFFERENTIAL	3.3 V		-3.3	-3.3 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -3.8V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.375 ns
MC10E116FNG	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL			GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.45 ns
MC10EL89DG	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	1	ECL		.44 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE					4.2 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified				NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	YES	e3	30	260	4.9 mm		0 ns
MC10EP89DG	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.37 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified				CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		0 ns
MC10EP89DTR2G	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.37 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.1 mm	3 mm	Not Qualified				CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm	1.4 V	0 ns
MC10H116D	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	ECL			GENERAL PURPOSE	23 mA	DIFFERENTIAL			-5.2	-5.2 V	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers			1.27 mm	75 Cel			0 Cel		Tin/Lead (Sn80Pb20)	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified			3		YES	e0	30	235	9.9 mm		1.3 ns
MC10H116DR2G	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	ECL			GENERAL PURPOSE	23 mA	DIFFERENTIAL			-5.2	-5.2 V	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers			1.27 mm	75 Cel			0 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			3		YES	e3	30	260	9.9 mm		1.3 ns
MC10H116FN	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		3	ECL			GENERAL PURPOSE	23 mA	DIFFERENTIAL			-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers			1.27 mm	75 Cel			0 Cel		TIN LEAD	QUAD	S-PQCC-J20	3	4.57 mm	8.965 mm	Not Qualified			3		YES	e0		235	8.965 mm		1.3 ns
MC10H116FNG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		3	ECL			GENERAL PURPOSE	23 mA	DIFFERENTIAL			-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers			1.27 mm	75 Cel			0 Cel		MATTE TIN	QUAD	S-PQCC-J20	3	4.57 mm	8.965 mm	Not Qualified			3		YES	e3	30	260	8.965 mm		1.3 ns
MC10SX1189DG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			.65 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			1		YES	e3	30	260	9.9 mm		.5 ns
NB3N401SMNTXG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	4			2.4 ns	EIA-899; TIA-899		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	4	MATTE TIN	QUAD	S-XQCC-N48	3	1 mm	7 mm				4		YES	e3	30	260	7 mm		6.4 ns
NB7NPQ7222MMUTXG	Onsemi	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2						DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20			.000025 Amp	3 V	.5 mm	85 Cel		DIFFERENTIAL	-40 Cel	2	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16	1	.55 mm	3 mm						YES		30	260	3 mm
NB7VPQ904MMUTWG	Onsemi	LINE DRIVER		NO LEAD	32	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	1.89 V								1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.11X.18,16				1.71 V	.4 mm						Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	R-XQCC-N32	1	.4 mm	2.85 mm							e4	30	260	4.5 mm
NBA3N011SSNT1G	Onsemi	LINE DRIVER	AUTOMOTIVE	GULL WING	5	TSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100	1.5 ns	EIA-644-A; TIA-644-A	10 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE	TSOP5/6,.11,37			.00001 Amp	3 V	.95 mm	125 Cel		3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	1	1.45 mm	2.8 mm			INVERTED			YES	e4	30	260	2.9 mm	.25 V
NBA3N201SDR2G	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100	2.4 ns		24 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE	SOP8,.25			.00001 Amp	3 V	1.27 mm	125 Cel		DIFFERENTIAL	-40 Cel		MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm		8 Amp	COMPLEMENTARY			YES	e3	30	260	4.9 mm	2 V	6 ns
NCV7424DB0R2G	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	27 V	4		AEC-Q100	10000 ns			SCHMITT TRIGGER	12 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	125 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	3	1.2 mm	4.4 mm				4		NO	e4	30	260	5 mm		6000 ns
NBSG16BA500R2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1			.14 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40		Line Driver or Receivers	.0001 Amp	2.375 V	1 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B16		1.4 mm	4 mm	Not Qualified			1	CAN ALSO OPERATE WITH -2.375V TO -3.465V SUPPLY IN ECL MODE	YES				4 mm		.14 ns
NB100LVEP17MNR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	VQCCN	RECTANGULAR	UNSPECIFIED	YES	5.5 V	4	ECL		.325 ns	GENERAL PURPOSE	55 mA	DIFFERENTIAL	2.5 V		-4.5	-4.5 V	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20		Line Driver or Receivers		2.375 V	.5 mm	85 Cel			-40 Cel	4	TIN	QUAD	R-XQCC-N24	1	1 mm	4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -2.375V TO -5.5V IN NECL MODE	YES	e3		260	4 mm		.325 ns
MC26LS30DR2G	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		300 ns	EIA-422-A; EIA-423-A		STANDARD	5 V		+-5	-5 V	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified				FOUR SINGLE ENDED DRIVERS OR TWO DIFFERENTIAL DRIVERS	NO	e3		260	9.9 mm	2 V	0 ns
NBSG16VSMNR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1			.18 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers	.0001 Amp	2.375 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N16		1 mm	3 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES	e0		235	3 mm		.18 ns
MC75172BDWR2G	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		25 ns	V.11; X.27; EIA-422-A; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	Tin (Sn)	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified					YES	e3	40	260	12.8 mm	1.5 V	0 ns
CS212EN16	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1				GENERAL PURPOSE		DIFFERENTIAL	15 V				IN-LINE						2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T16		4.07 mm	7.62 mm	Not Qualified			1		YES	e0			19.18 mm		0 ns
NCS5651MNTXG	Onsemi	LINE DRIVER																																MATTE TIN			1									e3	30	260
NBSG16MN	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1	ECL		.145 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers		2.375 V	.5 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn90Pb10)	QUAD	S-XQCC-N16		1 mm	3 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES	e0	30	235	3 mm		.145 ns
MC75174BDW	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		25 ns	V.11; X.27; EIA-422-A; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified					YES	e0	NOT SPECIFIED	235	12.8 mm	1.5 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.