Onsemi Line Drivers & Receivers 588

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MC100LVEL16DTR2	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.8 V	1	ECL		GENERAL PURPOSE	24 mA	DIFFERENTIAL	3.3 V	-3.3	-3.3 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Line Driver or Receivers		3 V	.65 mm	85 Cel	-40 Cel		TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -3.8V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.375 ns
MC100EP17DT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	ECL	.32 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	-3.0/-5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Line Driver or Receivers		3 V	.65 mm	85 Cel	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		1.2 mm	4.4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e4		260	6.5 mm		.32 ns
MC100EP16FDT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.26 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Line Driver or Receivers		3 V	.65 mm	85 Cel	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.26 ns
MC10H116MG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3			GENERAL PURPOSE	23 mA	DIFFERENTIAL		-5.2	-5.2 V	SMALL OUTLINE	SOP16,.23	Line Driver or Receivers	.000095 Amp		1.27 mm	75 Cel	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2.05 mm	5.275 mm	Not Qualified		COMPLEMENTARY	3		YES	e4		260	10.2 mm		1.45 ns
FIN1048MX	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V	3.3		SMALL OUTLINE	SOP16,.25	Line Driver or Receivers		3 V	1.27 mm	85 Cel	-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		4			e3	30	260	9.9 mm		2.5 ns
MC10EP16TDTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.3 ns	GENERAL PURPOSE	31 mA	DIFFERENTIAL	3.3 V	-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Line Driver or Receivers		3 V	.65 mm	85 Cel	-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.3 ns
MC1488MELG	Onsemi	LINE DRIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	9.09 V	4	BIPOLAR	350 ns	EIA-232-D		GATED	9 V	+-9	-9 V	SMALL OUTLINE	SOP14,.3	Line Driver or Receivers	.00001 Amp	8.91 V	1.27 mm	75 Cel	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	3	2.05 mm	5.275 mm	Not Qualified					NO	e4	40	260	10.2 mm	12 V	0 ns
MC10LVEP16DTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.8 V	1		.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				2.375 V	.65 mm	85 Cel	-40 Cel	1	TIN	DUAL	S-PDSO-G8	3	1.1 mm	3 mm	Not Qualified				CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		0 ns
MC100LVEP16D	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1	ECL	.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V			SMALL OUTLINE				2.375 V	1.27 mm	85 Cel	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.32 ns
MC14C89ABD	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR		EIA-232-D; V.28; EIA-562	.7 mA	SCHMITT TRIGGER	5 V	5		SMALL OUTLINE	SOP14,.25	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	-40 Cel		TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp		4	RESPONSE CONTROL		e0		235	8.65 mm		6000 ns
MC10E116FN	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V	-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers		4.2 V	1.27 mm	85 Cel	0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e0		235	11.505 mm		.45 ns
MC100EP16VSD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.28 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		3 V	1.27 mm	85 Cel	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.28 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.