Onsemi Line Drivers & Receivers 588

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MC10SX1190DTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.65 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				3 V	.65 mm	85 Cel	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified			1	OPERATES AT -3 TO -5.5V SUPPLY IN ECL MODE	YES	e4		260	6.5 mm		.38 ns
MC1488PG	Onsemi	LINE DRIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	9.09 V	4	BIPOLAR		350 ns	EIA-232-D		GATED	9 V	+-9	-9 V	IN-LINE	DIP14,.3	Line Driver or Receivers	.00001 Amp	8.91 V	2.54 mm	75 Cel	0 Cel	4	Tin (Sn)	DUAL	R-PDIP-T14		4.69 mm	7.62 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e3	NOT SPECIFIED	260	18.48 mm	12 V	0 ns
MC10EL16DG	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	1	ECL			GENERAL PURPOSE	22 mA	DIFFERENTIAL	5 V	+-5	-5 V	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		4.2 V	1.27 mm	85 Cel	-40 Cel		MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e3	30	260	4.9 mm		.325 ns
MC100E116FNG	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL			GENERAL PURPOSE	40 mA	DIFFERENTIAL	5 V	-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers		4.2 V	1.27 mm	85 Cel	0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.45 ns
MC100EP16VCD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.4 ns
MC100LVEL16DR2G	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1	ECL			GENERAL PURPOSE	24 mA	DIFFERENTIAL	3.3 V	-3.3	-3.3 V	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		3 V	1.27 mm	85 Cel	-40 Cel		MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -3.8V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.375 ns
MC10129FN	Onsemi	LINE RECEIVER	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		4	ECL			GENERAL PURPOSE		SCHMITT TRIGGER	5 V		-5.2 V	CHIP CARRIER					1.27 mm	85 Cel	-30 Cel		TIN LEAD	QUAD	S-PQCC-J20		4.57 mm	8.965 mm	Not Qualified			4			e0			8.965 mm		15 ns
MC10LVEP16MNR4G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.8 V	1			.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				2.375 V	.5 mm	85 Cel	-40 Cel	1	MATTE TIN	DUAL	S-XDSO-N8		1 mm	2 mm	Not Qualified				CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e3			2 mm		0 ns
MC14C89ABDR2	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR			EIA-232-D; V.28; EIA-562	.7 mA	SCHMITT TRIGGER	5 V	5		SMALL OUTLINE	SOP14,.25	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	-40 Cel		TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp		4	RESPONSE CONTROL		e0		235	8.65 mm		6000 ns
MC10EP16TD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.3 ns	GENERAL PURPOSE	31 mA	DIFFERENTIAL	3.3 V	-5.2	-5.2 V	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		3 V	1.27 mm	85 Cel	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.3 ns
MC100EP116FAR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	6	ECL		.34 ns	GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	Line Driver or Receivers		3 V	.8 mm	85 Cel	-40 Cel	6	TIN	QUAD	S-PQFP-G32	2	1.6 mm	7 mm	Not Qualified			6	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	7 mm		.34 ns
MC100EP16VBDR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.4 ns
FIN1048M	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V	3.3		SMALL OUTLINE	SOP16,.25	Line Driver or Receivers		3 V	1.27 mm	85 Cel	-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		4			e3	30	260	9.9 mm		2.5 ns
MC100LVEP16MNR4G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.8 V	1			.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				2.375 V	.5 mm	85 Cel	-40 Cel	1	NICKEL GOLD PALLADIUM	DUAL	S-XDSO-N8	1	1 mm	2 mm	Not Qualified				CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES		30	260	2 mm		0 ns
MC100EP16VTMNR4G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.35 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20	Line Driver or Receivers		3 V	.5 mm	85 Cel	-40 Cel	1	NICKEL GOLD PALLADIUM	DUAL	S-PDSO-N8	1	1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES		30	260	2 mm		.35 ns
MC10EP116FA	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	6	ECL		.34 ns	GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V	-5.2	-5.2 V	FLATPACK, LOW PROFILE	QFP32,.35SQ,32	Line Driver or Receivers		3 V	.8 mm	85 Cel	-40 Cel	6	TIN LEAD	QUAD	S-PQFP-G32		1.6 mm	7 mm	Not Qualified			6	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	7 mm		.34 ns
NCV7361DR2	Onsemi	LINE DRIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	1			4000 ns	GENERAL PURPOSE		SCHMITT TRIGGER				SMALL OUTLINE				5.25 V	1.27 mm	125 Cel	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1		NO	e0	30	235	4.9 mm		6000 ns
MC10H115ML2	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	ECL			GENERAL PURPOSE		DIFFERENTIAL			-5.2 V	SMALL OUTLINE						75 Cel	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16				Not Qualified			4			e4					1.45 ns
MC1489P	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BIPOLAR			EIA-232-D	26 mA	SCHMITT TRIGGER	5 V	5		IN-LINE	DIP14,.3	Line Driver or Receivers		4.5 V	2.54 mm	75 Cel	0 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T14		4.69 mm	7.62 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e0	NOT SPECIFIED	235	18.86 mm		85 ns
MC100EP16FDTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.26 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Line Driver or Receivers		3 V	.65 mm	85 Cel	-40 Cel	1	TIN	DUAL	R-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.26 ns
MC10EL89D	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	1	ECL		.44 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V			SMALL OUTLINE				4.2 V	1.27 mm	85 Cel	-40 Cel	2	Tin/Lead (Sn80Pb20)	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified				NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	YES	e0	30	235	4.9 mm		0 ns
MC100EP16FDTR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.26 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Line Driver or Receivers		3 V	.65 mm	85 Cel	-40 Cel	1	TIN	DUAL	R-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.26 ns
MC10129P	Onsemi	LINE RECEIVER	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		4	ECL			GENERAL PURPOSE		SCHMITT TRIGGER	5 V		-5.2 V	IN-LINE					2.54 mm	85 Cel	-30 Cel		TIN LEAD	DUAL	R-PDIP-T16		4.44 mm	7.62 mm	Not Qualified			4			e0			19.175 mm		15 ns
MC100EP16VSMPR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	10	VSON	SQUARE	UNSPECIFIED	YES	5.5 V	1	ECL		.28 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC10,.11,20	Line Driver or Receivers		3 V	.5 mm	85 Cel	-40 Cel	1	TIN LEAD	DUAL	S-XDSO-N10		1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0			3 mm		.28 ns
MC100EP116MNR4G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	21	VQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	6	ECL		.34 ns	GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel	-40 Cel	6	TIN	QUAD	S-XQCC-N21	1	1 mm	5 mm	Not Qualified			6	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	5 mm		.34 ns
MC10216FNR2	Onsemi	LINE RECEIVER	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		3	ECL			GENERAL PURPOSE	27 mA	DIFFERENTIAL		-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ	Line Driver or Receivers			1.27 mm	85 Cel	-30 Cel		TIN LEAD	QUAD	S-PQCC-J20		4.57 mm	8.965 mm	Not Qualified			3		YES	e0		235	8.965 mm		2.5 ns
MC100LVEP16DTG	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.8 V	1			.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				2.375 V	.65 mm	85 Cel	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	3	1.1 mm	3 mm	Not Qualified				CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		0 ns
MC10H116P	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		3				GENERAL PURPOSE	23 mA	DIFFERENTIAL		-5.2	-5.2 V	IN-LINE	DIP16,.3	Line Driver or Receivers	.000095 Amp		2.54 mm	75 Cel	0 Cel		Tin/Lead (Sn80Pb20)	DUAL	R-PDIP-T16		4.44 mm	7.62 mm	Not Qualified		COMPLEMENTARY	3		YES	e0	30	235	19.175 mm		1.45 ns
MC10EP16D	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.28 ns	GENERAL PURPOSE	32 mA	DIFFERENTIAL	3.3 V	-5.2	-5.2 V	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		3 V	1.27 mm	85 Cel	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.28 ns
MC1489AM	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR			EIA-232-D	26 mA	SCHMITT TRIGGER	5 V	5		SMALL OUTLINE	SOP14,.3	Line Driver or Receivers		4.5 V	1.27 mm	75 Cel	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	3	2.05 mm	5.275 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e4	NOT SPECIFIED	NOT SPECIFIED	10.2 mm		85 ns
MC10EL89DR2G	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	1	ECL		.44 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V			SMALL OUTLINE				4.2 V	1.27 mm	85 Cel	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified				NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	YES	e3	30	260	4.9 mm		0 ns
MC100EP16VSMNR4G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	UNSPECIFIED	YES	5.5 V	1	ECL		.28 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20	Line Driver or Receivers		3 V	.5 mm	85 Cel	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-XDSO-N8	1	1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e4		260	2 mm		.28 ns
MC100LVEL16D	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1	ECL			GENERAL PURPOSE	24 mA	DIFFERENTIAL	3.3 V	-3.3	-3.3 V	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		3 V	1.27 mm	85 Cel	-40 Cel		Tin/Lead (Sn80Pb20)	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -3.8V SUPPLY IN NECL MODE	YES	e0	30	235	4.9 mm		.375 ns
MC100EP16VCMNR4	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.4 ns	GENERAL PURPOSE	52 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20	Line Driver or Receivers	.00015 Amp	3 V	.5 mm	85 Cel	-40 Cel	1	TIN LEAD	DUAL	S-PDSO-N8		1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0			2 mm		.4 ns
MC100EP16VBD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.4 ns
MC100EP16VADTR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.34 ns
MC10EL89MNR4	Onsemi	LINE DRIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	UNSPECIFIED	YES	5.7 V	1	ECL		.44 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V			SMALL OUTLINE, VERY THIN PROFILE				4.2 V	.5 mm	85 Cel	-40 Cel	2	TIN LEAD	DUAL	S-XDSO-N8		1 mm	2 mm	Not Qualified				NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	YES	e0			2 mm		0 ns
MC10H116MR1	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	ECL			GENERAL PURPOSE	23 mA	DIFFERENTIAL		-5.2	-5.2 V	SMALL OUTLINE	SOP16,.3	Line Driver or Receivers			1.27 mm	75 Cel	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2.05 mm	5.275 mm	Not Qualified			3		YES	e4			10.2 mm		1.3 ns
MC100EP16TMNR4	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.3 ns	GENERAL PURPOSE	39 mA	DIFFERENTIAL	3.3 V	-5.2	-5.2 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20	Line Driver or Receivers	.00015 Amp	3 V	.5 mm	85 Cel	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-N8		1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0			2 mm		.3 ns
MC10H115M	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	ECL			GENERAL PURPOSE	29 mA	DIFFERENTIAL		-5.2	-5.2 V	SMALL OUTLINE	SOP16,.3	Line Driver or Receivers			1.27 mm	75 Cel	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2.05 mm	5.275 mm	Not Qualified			4		NO	e4		260	10.2 mm		1.3 ns
NBA3N200SDR2G	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				AEC-Q100			22 mA		3.3 V	3.3		SMALL OUTLINE	SOP8,.25	Line Driver or Receivers	.00001 Amp		1.27 mm	125 Cel	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1			Not Qualified	8 Amp				YES	e3	30	260			6 ns
MC10EL16DR2	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	1	ECL			GENERAL PURPOSE	22 mA	DIFFERENTIAL	5 V	-5.2	-5.2 V	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		4.2 V	1.27 mm	85 Cel	-40 Cel		TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	4.9 mm		.325 ns
MC100EP16DT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.28 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Line Driver or Receivers		3 V	.65 mm	85 Cel	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.28 ns
MC100EP16VCDTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel	-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.4 ns
MC10116P	Onsemi	LINE RECEIVER	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		3	ECL10K			GENERAL PURPOSE	23 mA	DIFFERENTIAL SCHMITT TRIGGER		-5.2	-5.2 V	IN-LINE	DIP16,.3	Line Driver or Receivers			2.54 mm	85 Cel	-30 Cel		TIN LEAD	DUAL	R-PDIP-T16		4.44 mm	7.62 mm	Not Qualified			3			e0	30	235	19.175 mm		2.9 ns
MC10116FNR2	Onsemi	LINE RECEIVER	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		3	ECL10K			GENERAL PURPOSE	23 mA	DIFFERENTIAL SCHMITT TRIGGER		-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ	Line Driver or Receivers			1.27 mm	85 Cel	-30 Cel		TIN LEAD	QUAD	S-PQCC-J20	1	4.57 mm	8.9662 mm	Not Qualified			3			e0		235	8.9662 mm		2.9 ns
MC10EP17DTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	ECL		.3 ns	GENERAL PURPOSE	62 mA	DIFFERENTIAL	3.3 V	-3.0/-5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Line Driver or Receivers		3 V	.65 mm	85 Cel	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		1.2 mm	4.4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e4		260	6.5 mm		.3 ns
MC100EP16VTD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.35 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V	-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		3 V	1.27 mm	85 Cel	-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.35 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.