Onsemi Line Drivers & Receivers 588

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
FIN1531MX	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		2 ns	EIA-644; TIA-644		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm	.25 V
MC100EL16DR2G	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	1	ECL			GENERAL PURPOSE	26 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e3	30	260	4.9 mm		.325 ns
MC10EP16VBDTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL			GENERAL PURPOSE	32 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-3 TO -5.5	YES	e0			3 mm		0 ns
NCV7420D23G	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	26 V	1				GENERAL PURPOSE		STANDARD	7.3 V				SMALL OUTLINE					5 V	1.27 mm	125 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G14	2	1.72 mm	3.93 mm	Not Qualified			1		NO	e3	30	260	8.68 mm
MC10EP116MNG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	21	VQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	6	ECL		.34 ns	GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	6	MATTE TIN	QUAD	S-XQCC-N21		1 mm	5 mm	Not Qualified			6	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3			5 mm		.34 ns
MC1489MR1	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR			EIA-232-D		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	75 Cel			0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14		2.05 mm	5.275 mm	Not Qualified			4	RESPONSE CONTROL	NO	e4			10.2 mm		85 ns
MC10E416FNR2G	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL			GENERAL PURPOSE	162 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			0 Cel		TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.5 ns
MC100EP16VBMNR4	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	UNSPECIFIED	YES	5.5 V	1	ECL		.4 ns	GENERAL PURPOSE	52 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers	.00015 Amp	3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-XDSO-N8		1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0			2 mm		.4 ns
MC100LVEP16DG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1	ECL		.32 ns	GENERAL PURPOSE	36 mA	DIFFERENTIAL	2.5 V		+-2.375/+-3.8		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	2.375 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.32 ns
MC10EL89DTR2	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1	ECL		.44 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.2 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified				NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	YES	e0		235	3 mm		0 ns
MC100EP16VSDTR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.28 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN	DUAL	S-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.28 ns
MC100LVEL17DW	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	4	ECL			GENERAL PURPOSE		DIFFERENTIAL	3.3 V		-3.3/-5,3.3/5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -3.8V SUPPLY IN NECL MODE	YES	e0		235	12.8 mm		.55 ns
NCV7310DR2	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			4000 ns	ISO 9141		SCHMITT TRIGGER	5 V	20 V			SMALL OUTLINE		6 V			4.5 V	1.27 mm	125 Cel	12 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1		NO	e0		235	4.9 mm		4000 ns
MC10EL16MNR4	Onsemi	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	UNSPECIFIED	YES	5.7 V	1	ECL			GENERAL PURPOSE	22 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers		4.2 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-XDSO-N8		1 mm	2 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0			2 mm		.325 ns
MC100LVEL16MNR4	Onsemi	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1	ECL			GENERAL PURPOSE	24 mA	DIFFERENTIAL	3.3 V		+-3.3	-3.3 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-N8		1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -3.8V SUPPLY IN NECL MODE	YES	e0			2 mm		.375 ns
MC100EP17MNTXG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	4	ECL		.32 ns	GENERAL PURPOSE	70 mA	DIFFERENTIAL	3.3 V		+-3.3/+-5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	TIN	QUAD	S-XQCC-N20	1	1 mm	4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3		260	4 mm		.32 ns
FIN1018K8X	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				EIA-644; TIA-644	7 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		TIN	DUAL	R-PDSO-G8	1	.9 mm	2 mm	Not Qualified	8 Amp		1			e3	30	260	2.3 mm		2.5 ns
MC1489ML1	Onsemi		COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			BIPOLAR				26 mA		5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers			1.27 mm	70 Cel			0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14				Not Qualified	10 Amp					e4					85 ns
MC10H115FN	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		4	ECL			GENERAL PURPOSE	29 mA	DIFFERENTIAL			-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers			1.27 mm	75 Cel			0 Cel		Tin/Lead (Sn80Pb20)	QUAD	S-PQCC-J20		4.57 mm	8.965 mm	Not Qualified			4		NO	e0	30	235	8.965 mm		1.3 ns
MC14C88BP	Onsemi	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	1	BIMOS		3500 ns	EIA-232-D; V.28; EIA-562		GATED	12 V		+-4.5/+-15	-12 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDIP-T14		4.69 mm	7.62 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e0		235	18.86 mm	7.4 V	0 ns
MC10EP89MNR4G	Onsemi	LINE DRIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1			.37 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	NICKEL GOLD PALLADIUM	DUAL	S-PDSO-N8	1	1 mm	2 mm	Not Qualified				CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES		30	260	2 mm		0 ns
MC100LVEL16DTG	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.8 V	1	ECL			GENERAL PURPOSE	24 mA	DIFFERENTIAL	3.3 V		+-3.3	-3.3 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	S-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -3.8V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.375 ns
MC100LVEL16MNR4G	Onsemi	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1	ECL			GENERAL PURPOSE	24 mA	DIFFERENTIAL	3.3 V		+-3.3	-3.3 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		NICKEL GOLD PALLADIUM	DUAL	R-PDSO-N8	1	1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -3.8V SUPPLY IN NECL MODE	YES		30	260	2 mm		.375 ns
MC100LVEP16DR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1			.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				SMALL OUTLINE					2.375 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified				CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e3	40	260	4.9 mm		0 ns
FIN1531M	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			2 ns	EIA-644; TIA-644		STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	4		DUAL	R-PDSO-G16		1.753 mm	3.899 mm						YES				9.902 mm
MC100EP16VTDTR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.35 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.35 ns
MC100EP16VBMNR4G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	UNSPECIFIED	YES	5.5 V	1	ECL		.4 ns	GENERAL PURPOSE	52 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers	.00015 Amp	3 V	.5 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-XDSO-N8	1	1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e4		260	2 mm		.4 ns
NCV7361ADR2G	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	1			4000 ns	GENERAL PURPOSE		SCHMITT TRIGGER	12 V				SMALL OUTLINE					5.25 V	1.27 mm	125 Cel			-40 Cel	1	Tin (Sn)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1		NO	e3	40	260	4.9 mm		6000 ns
MC1488DG	Onsemi	LINE DRIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	9.09 V	4	BIPOLAR		350 ns	EIA-232-D		GATED	9 V		+-9	-9 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00001 Amp	8.91 V	1.27 mm	75 Cel			0 Cel	4	Tin (Sn)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e3	40	260	8.65 mm	12 V	0 ns
MC100LVEL17DWR2	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	4	ECL			GENERAL PURPOSE		DIFFERENTIAL	3.3 V		-3.3/-5,3.3/5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -3.8V SUPPLY IN NECL MODE	YES	e0		235	12.8 mm		.55 ns
MC10EP16VBD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL			GENERAL PURPOSE	32 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-3 TO -5.5	YES	e0			4.9 mm		0 ns
MC100EP16FDR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.26 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.26 ns
MC10EP116FAG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	6	ECL		.34 ns	GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	FLATPACK, LOW PROFILE	QFP32,.35SQ,32		Line Driver or Receivers		3 V	.8 mm	85 Cel			-40 Cel	6	TIN	QUAD	S-PQFP-G32	2	1.6 mm	7 mm	Not Qualified			6	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	7 mm		.34 ns
NBA3N201SDG	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100	2.4 ns		24 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE	SOP8,.25			.00001 Amp	3 V	1.27 mm	125 Cel		DIFFERENTIAL	-40 Cel		MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm		8 Amp	COMPLEMENTARY			YES	e3	30	260	4.9 mm	2 V	6 ns
MC100EP116FA	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	6	ECL		.34 ns	GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	FLATPACK, LOW PROFILE	QFP32,.35SQ,32		Line Driver or Receivers		3 V	.8 mm	85 Cel			-40 Cel	6	TIN LEAD	QUAD	S-PQFP-G32		1.6 mm	7 mm	Not Qualified			6	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	7 mm		.34 ns
NCV7381DP0R2G	Onsemi	LINE DRIVER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	50 V	1		AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER		5.25 V			SMALL OUTLINE, SHRINK PITCH		4.75 V			5.5 V	.65 mm	125 Cel	5 V		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	2	1.99 mm	5.3 mm				1		YES	e3	30	260	6.2 mm
MC1488ML1	Onsemi	LINE DRIVER	COMMERCIAL EXTENDED	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	9.09 V	4	BIPOLAR		175 ns	EIA-232-D		GATED	9 V			-9 V	SMALL OUTLINE, SHRINK PITCH					8.91 V	.65 mm	75 Cel			0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e4			6.2 mm
MC10EP17DTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	ECL		.3 ns	GENERAL PURPOSE	62 mA	DIFFERENTIAL	3.3 V		-3.0/-5.5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e4	30	260	6.5 mm		.3 ns
MC100EP16FD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.26 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.26 ns
MC10EP16MNR4G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.28 ns	GENERAL PURPOSE	32 mA	DIFFERENTIAL	3.3 V		+-3.3/+-5		SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	1	TIN	DUAL	S-PDSO-N8		1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3		260	2 mm		.28 ns
MC10H115ML1	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	ECL			GENERAL PURPOSE		DIFFERENTIAL				-5.2 V	SMALL OUTLINE							75 Cel			0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16				Not Qualified			4			e4					1.45 ns
MC10EP16VCDT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL			GENERAL PURPOSE	32 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-3 TO -5.5	YES	e0			3 mm		0 ns
MC100LVEL17DWG	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	4	ECL			GENERAL PURPOSE		DIFFERENTIAL	3.3 V		-3.3/-5,3.3/5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		TIN	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -3.8V SUPPLY IN NECL MODE	YES	e3	30	260	12.8 mm		.55 ns
MC10EP16TDT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.3 ns	GENERAL PURPOSE	31 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.3 ns
MC3488ADR2G	Onsemi	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	2	BIPOLAR		140000 ns	EIA-232-D; X.26; X.28; EIA-423; FED STD 1030		STANDARD	12 V		+-12	-12 V	SMALL OUTLINE	DIP8,.3		Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel			0 Cel	2	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified				PROGRAMMABLE SLEW RATE	NO	e3	30	260	4.9 mm	8 V	0 ns
NCV7361ADR2	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	1			4000 ns	GENERAL PURPOSE		SCHMITT TRIGGER	12 V				SMALL OUTLINE					5.25 V	1.27 mm	125 Cel			-40 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1		NO	e0	30	240	4.9 mm		6000 ns
MC100EP16DTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.28 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn90Pb10)	DUAL	R-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0	30	235	3 mm		.28 ns
MC100EL16DT	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1	ECL			GENERAL PURPOSE	26 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	3 mm		.325 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.