Onsemi Line Drivers & Receivers 588

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
NBSG16BAR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1			.145 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				GRID ARRAY, LOW PROFILE					2.375 V	1 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B16		1.4 mm	4 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES		NOT SPECIFIED	NOT SPECIFIED	4 mm		.145 ns
NCN2500MNR2	Onsemi	LINE TRANSCEIVER	OTHER	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1			15 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.25 V	1.8/3.3,5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	4 V	Line Driver or Receivers		1.5 V	.5 mm	85 Cel			-25 Cel	1	TIN LEAD	QUAD	S-XQCC-N16		1 mm	3 mm	Not Qualified			1		YES	e0		235	3 mm		15 ns
NB3N200SDR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1			2.4 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	2.97 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e3	30	260	4.9 mm	2 V	6 ns
MC75172BDWR2	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		25 ns	V.11; X.27; EIA-422-A; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified					YES	e0	NOT SPECIFIED	235	12.8 mm	1.5 V	0 ns
100314PCX	Onsemi	LINE RECEIVER	OTHER	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		5				GENERAL PURPOSE		DIFFERENTIAL					IN-LINE	DIP24,.4			.00024 Amp		2.54 mm	85 Cel		DIFFERENTIAL	0 Cel			DUAL	R-PDIP-T24		5.08 mm	10.16 mm			TRUE	5	NEGETIVE SUPPLY FROM -4.2 TO-5.7 V AND NEG SUPPLY CURRENT IS -60mA	YES				30.5 mm		2 ns
NBSG16VSBA	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1			.145 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40		Line Driver or Receivers	.00015 Amp	2.375 V	1 mm	85 Cel			-40 Cel	1	TIN LEAD	BOTTOM	S-PBGA-B16	3	1.4 mm	4 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES	e0			4 mm		.145 ns
74VHC161284MTD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		30 ns	IEEE 1284	70 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20			.0001 Amp	4.5 V	.5 mm	85 Cel			-40 Cel	19		DUAL	R-PDSO-G48		1.2 mm	6.1 mm		84 Amp		19		NO				12.5 mm		30 ns
NBSG16MMNR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1			.155 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers	.0001 Amp	2.375 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-PQCC-N16		1 mm	3 mm	Not Qualified			1		YES	e0		235	3 mm		.155 ns
NCV7361ADG	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	1			4000 ns	GENERAL PURPOSE		SCHMITT TRIGGER	12 V				SMALL OUTLINE					5.25 V	1.27 mm	125 Cel			-40 Cel	1	Tin (Sn)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1		NO	e3	40	260	4.9 mm		6000 ns
MC10H116MELG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3				GENERAL PURPOSE	23 mA	DIFFERENTIAL			-5.2	-5.2 V	SMALL OUTLINE	SOP16,.23		Line Driver or Receivers	.000095 Amp		1.27 mm	75 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2.05 mm	5.275 mm	Not Qualified		COMPLEMENTARY	3		YES	e4		260	10.2 mm		1.45 ns
NCV7420D26R2G	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	26 V	1				GENERAL PURPOSE		STANDARD	7.3 V				SMALL OUTLINE					6 V	1.27 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	2	1.72 mm	3.93 mm	Not Qualified			1		NO	e3	30	260	8.68 mm
MC10H115FNG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		4	ECL			GENERAL PURPOSE	29 mA	DIFFERENTIAL			-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers			1.27 mm	75 Cel			0 Cel		TIN	QUAD	S-PQCC-J20	3	4.57 mm	8.965 mm	Not Qualified			4		NO	e3	30	260	8.965 mm		1.3 ns
NCV7420D24G	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	26 V	1				GENERAL PURPOSE		STANDARD	7.3 V				SMALL OUTLINE					5 V	1.27 mm	125 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G14	2	1.72 mm	3.93 mm	Not Qualified			1		NO	e3	30	260	8.68 mm
MC100EP16VSMP	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	10	VSON	SQUARE	UNSPECIFIED	YES	5.5 V	1	ECL		.28 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC10,.11,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-XDSO-N10		1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0			3 mm		.28 ns
MC100EL16MNR4G	Onsemi	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	UNSPECIFIED	YES	5.7 V	1	ECL			GENERAL PURPOSE	26 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers		4.2 V	.5 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	S-XDSO-N8		1 mm	2 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e3			2 mm		.325 ns
MC1489MG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR			EIA-232-D	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.5 V	1.27 mm	75 Cel			0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	3	2.05 mm	5.275 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e4	40	260	10.2 mm		85 ns
MC10EP89DTR2	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.37 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.1 mm	3 mm	Not Qualified				CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm	1.4 V	0 ns
MC10H115MELG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	ECL			GENERAL PURPOSE	29 mA	DIFFERENTIAL			-5.2	-5.2 V	SMALL OUTLINE	SOP16,.3		Line Driver or Receivers			1.27 mm	75 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2.05 mm	5.275 mm	Not Qualified			4		NO	e4		260	10.2 mm		1.3 ns
MC100EL16DTR2	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1	ECL			GENERAL PURPOSE	26 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	3 mm		.325 ns
USB1T20MTCX	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		300 ns	GENERAL PURPOSE	5 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.2 mm	4.4 mm	Not Qualified	4 Amp		1		YES	e4	30	260	5 mm	2.5 V	18 ns
MC10H116MEL	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3				GENERAL PURPOSE	23 mA	DIFFERENTIAL			-5.2	-5.2 V	SMALL OUTLINE	SOP16,.23		Line Driver or Receivers	.000095 Amp		1.27 mm	75 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2.05 mm	5.275 mm	Not Qualified		COMPLEMENTARY	3		YES	e4		260	10.2 mm		1.45 ns
MC100EP16FMNR4G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.26 ns	GENERAL PURPOSE	45 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers	.00015 Amp	3 V	.5 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-N8	1	1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e4		260	2 mm		.26 ns
MC10E116FNR2G	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL			GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			0 Cel		TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.45 ns
MC10EL89DT	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1	ECL		.44 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.2 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified				NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	YES	e0		235	3 mm		0 ns
MC10EP16DTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.28 ns	GENERAL PURPOSE	32 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.28 ns
NCV7380DR2	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			5000 ns	GENERAL PURPOSE		SCHMITT TRIGGER	5 V	18 V			SMALL OUTLINE		7 V			4.5 V	1.27 mm	125 Cel	12 V		-40 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1		NO	e0	NOT SPECIFIED	235	4.9 mm		6000 ns
MC100EP16VTDG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.35 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.35 ns
MC10EP16VCD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL			GENERAL PURPOSE	32 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-3 TO -5.5	YES	e0			4.9 mm		0 ns
MC10EP16TDTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.3 ns	GENERAL PURPOSE	31 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN	DUAL	S-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.3 ns
MC100EP16VBDTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.4 ns
MC10EP16VADR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.34 ns
MC3488AP1	Onsemi	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	13.2 V	2	BIPOLAR		140000 ns	EIA-232-D; X.26; X.28; EIA-423; FED STD 1030		STANDARD	12 V		+-12	-12 V	IN-LINE	DIP8,.3		Line Driver or Receivers	.00001 Amp	10.8 V	2.54 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDIP-T8		4.45 mm	7.62 mm	Not Qualified				PROGRAMMABLE SLEW RATE	NO	e0		235	9.78 mm	8 V	0 ns
MC10LVEP16DT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.8 V	1	ECL		.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.375 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.32 ns
MC100EL17DW	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	4	ECL			GENERAL PURPOSE		DIFFERENTIAL	5 V		-4.2/-5.5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			-40 Cel		Tin/Lead (Sn80Pb20)	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified			4	ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e0	30	235	12.8 mm		.55 ns
MC10H115L	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO		4	ECL			GENERAL PURPOSE	29 mA	DIFFERENTIAL			-5.2	-5.2 V	IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	75 Cel			0 Cel		TIN LEAD	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified			4		NO	e0			19.49 mm		1.3 ns
MC100E116FNR2G	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL			GENERAL PURPOSE	40 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.45 ns
MC14C89BP	Onsemi		INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS				.7 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDIP-T14				Not Qualified	3.2 Amp					e0		235			6000 ns
MC10EP89MNR4	Onsemi	LINE DRIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1			.37 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-N8		1 mm	2 mm	Not Qualified				CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0			2 mm		0 ns
MC3488ADG	Onsemi	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	2	BIPOLAR		140000 ns	EIA-232-D; X.26; X.28; EIA-423; FED STD 1030		STANDARD	12 V		+-12	-12 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel			0 Cel	2	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified				PROGRAMMABLE SLEW RATE	NO	e3	30	260	4.9 mm	8 V	0 ns
NBA3N200SDG	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				AEC-Q100			22 mA		3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp		1.27 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1			Not Qualified	8 Amp				YES	e3	30	260			6 ns
NCV7381DP0G	Onsemi	LINE DRIVER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	50 V	1		AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER		5.25 V			SMALL OUTLINE, SHRINK PITCH		4.75 V			5.5 V	.65 mm	125 Cel	5 V		-40 Cel	1	TIN	DUAL	R-PDSO-G16	2	1.99 mm	5.3 mm				1		YES	e3	30	260	6.2 mm
MC10EL89DR2	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	1	ECL		.44 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE					4.2 V	1.27 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified				NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	YES	e0		235	4.9 mm		0 ns
NCV7382DR2G	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			5000 ns	GENERAL PURPOSE		SCHMITT TRIGGER	5 V	18 V			SMALL OUTLINE		7 V			4.5 V	1.27 mm	125 Cel	12 V		-40 Cel	1	Tin (Sn)	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1		NO	e3	40	260	4.9 mm		6000 ns
NCV7381ADP0R2G	Onsemi	LINE DRIVER	AUTOMOTIVE	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	50 V	1		AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER		5.25 V			SMALL OUTLINE, SHRINK PITCH		4.75 V			5.5 V	.65 mm	125 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.99 mm	5.3 mm				1		YES	e4	30	260	6.2 mm
MC10EL89DTR2G	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1	ECL		.44 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.2 V	.65 mm	85 Cel			-40 Cel	2	Tin (Sn)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified				NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	YES	e3	40	260	3 mm		0 ns
MC10H115MEL	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	ECL			GENERAL PURPOSE	29 mA	DIFFERENTIAL			-5.2	-5.2 V	SMALL OUTLINE	SOP16,.3		Line Driver or Receivers			1.27 mm	75 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2.05 mm	5.275 mm	Not Qualified			4		NO	e4		260	10.2 mm		1.3 ns
MC10EP17MNTXG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	4	ECL		.3 ns	GENERAL PURPOSE	68 mA	DIFFERENTIAL	3.3 V		+-3.3/+-5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	TIN	QUAD	S-XQCC-N20	1	1 mm	4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3		260	4 mm		.3 ns
MC1489AML2	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR			EIA-232-D	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SOP14,.3		Line Driver or Receivers		4.5 V	.65 mm	75 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL		e4			6.2 mm		50 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.