Onsemi Line Drivers & Receivers 588

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
NCS5650MNTXG	Onsemi	LINE DRIVER	AUTOMOTIVE	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	6 V	2			GENERAL PURPOSE		DIFFERENTIAL	12 V		12		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20		Line Driver or Receivers		3 V	.5 mm	125 Cel			-40 Cel	2	TIN	QUAD	S-XQCC-N20	1	1 mm	4 mm	Not Qualified					NO	e3		260	4 mm		0 ns
MC26LS30D	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	300 ns	EIA-422-A; EIA-423-A		STANDARD	5 V		5,+-15	-5 V	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified				FOUR SINGLE ENDED DRIVERS OR TWO DIFFERENTIAL DRIVERS	NO	e0		235	9.9 mm	2 V	0 ns
NB100LVEP17MNG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	VQCCN	RECTANGULAR	UNSPECIFIED	YES	5.5 V	4	ECL	.325 ns	GENERAL PURPOSE	55 mA	DIFFERENTIAL	2.5 V		-4.5	-4.5 V	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20		Line Driver or Receivers		2.375 V	.5 mm	85 Cel			-40 Cel	4	MATTE TIN	QUAD	R-XQCC-N24	1	1 mm	4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -2.375V TO -5.5V IN NECL MODE	YES	e3	30	260	4 mm		.325 ns
100314QCX	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	-5.7 V	5	ECL	1.8 ns		30 mA	DIFFERENTIAL				-5 V	CHIP CARRIER	LDCC28,.5SQ			.00024 Amp	-4.2 V	1.27 mm	85 Cel		DIFFERENTIAL	0 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.48 mm			COMPLEMENTARY	1		YES				11.48 mm	.15 V	1.8 ns
74LVX161284MEAX	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13	CMOS	44 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.635 mm	85 Cel	3.3 V		-40 Cel	14	MATTE TIN	DUAL	R-PDSO-G48	1	2.74 mm	7.495 mm	Not Qualified		TRUE	13		NO	e3			15.875 mm		44 ns
MC75172BP	Onsemi		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR	25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	85 Cel		3-STATE	-40 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16				Not Qualified					YES	e0				1.5 V
MC75172BDWG	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	25 ns	V.11; X.27; EIA-422-A; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	Tin (Sn)	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified					YES	e3	40	260	12.8 mm	1.5 V	0 ns
NBLVEP16VRMNR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	1	ECL		GENERAL PURPOSE		DIFFERENTIAL	2.5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					2.375 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-XQCC-N16		1 mm	3 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -5.5V	YES		NOT SPECIFIED	NOT SPECIFIED	3 mm
NB3N201SDG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1		2.4 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	2.97 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e3	NOT SPECIFIED	NOT SPECIFIED	4.9 mm	.05 V	6 ns
NBSG16VSMN	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1		.18 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers	.0001 Amp	2.375 V	.5 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn90Pb10)	QUAD	S-XQCC-N16		1 mm	3 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES	e0	30	235	3 mm		.18 ns
NBSG16VSMA1TBG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	BALL	16	TBGA	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1		.145 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		GRID ARRAY, THIN PROFILE	LGA16,4X4,40		Line Driver or Receivers	.0001 Amp	2.375 V	1 mm	85 Cel			-40 Cel	1	MATTE TIN	BOTTOM	S-PBGA-B16		1.03 mm	4 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES	e3			4 mm		.145 ns
MC3100EP16VSDTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.28 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3			3 mm		.28 ns
NB7NPQ7041MMUTWG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	34	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	3.465 V	4					DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.135 V	.4 mm	85 Cel			-40 Cel	4	NICKEL GOLD PALLADIUM	QUAD	R-XQCC-N34	1	.4 mm	3.1 mm				4		YES		30	260	4.3 mm
MC75172BDW	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	25 ns	V.11; X.27; EIA-422-A; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified					YES	e0	NOT SPECIFIED	235	12.8 mm	1.5 V	0 ns
NBSG16BA100	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1		.14 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40		Line Driver or Receivers	.0001 Amp	2.375 V	1 mm	85 Cel			-40 Cel	1	TIN LEAD	BOTTOM	S-PBGA-B16		1.4 mm	4 mm	Not Qualified			1	CAN ALSO OPERATE WITH -2.375V TO -3.465V SUPPLY IN ECL MODE	YES	e0			4 mm		.14 ns
NB7VPQ7011MMUTXG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	12	VQCCN	SQUARE	PLASTIC/EPOXY	YES	1.9 V	1					DIFFERENTIAL	1.8 V				CHIP CARRIER, VERY THIN PROFILE	LCC12,.07SQ,16				1.7 V	.4 mm	85 Cel		DIFFERENTIAL	-40 Cel	1		QUAD	S-PQCC-N12		.55 mm	1.6 mm			COMPLEMENTARY	1		YES		NOT SPECIFIED	NOT SPECIFIED	1.6 mm
NBSG16MMNG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1		.155 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers	.0001 Amp	2.375 V	.5 mm	85 Cel			-40 Cel	1	NICKEL GOLD PALLADIUM	QUAD	S-PQCC-N16	1	1 mm	3 mm	Not Qualified			1		YES		30	260	3 mm		.155 ns
MC26LS30DG	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	300 ns	EIA-422-A; EIA-423-A		STANDARD	5 V		+-5	-5 V	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified				FOUR SINGLE ENDED DRIVERS OR TWO DIFFERENTIAL DRIVERS	NO	e3		260	9.9 mm	2 V	0 ns
74VHC161284MEA	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	30 ns	IEEE-1284	70 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH	SSOP48,.4			.0001 Amp	4.5 V	.635 mm	85 Cel			-40 Cel	19		DUAL	R-PDSO-G48		2.74 mm	7.5 mm		84 Amp		19		NO				15.875 mm		30 ns
74LVX161284MTD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13	CMOS	44 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	85 Cel	3.15 V		-40 Cel	14	MATTE TIN	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified			13	CONTAINS EIGHT BIDIRECTIONAL DATA BUFFERS	NO	e3			12.5 mm		44 ns
NBSG16MAHTBG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	BALL	16	TBGA	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1		.14 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				GRID ARRAY, THIN PROFILE					2.375 V	1 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B16		1.03 mm	4 mm	Not Qualified			1		YES		NOT SPECIFIED	NOT SPECIFIED	4 mm		.14 ns
NBSG16VSMNHTBG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1		.18 ns	GENERAL PURPOSE	34 mA	DIFFERENTIAL	2.5 V		+-2.5/+-3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		Line Driver or Receivers	.0001 Amp	2.375 V	.5 mm	85 Cel			-40 Cel	1	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16	1	1 mm	3 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES		30	260	3 mm		.18 ns
100314PC	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	-5.7 V	5	ECL	1.8 ns		30 mA	DIFFERENTIAL				-5 V	IN-LINE	DIP24,.4			.00024 Amp	-4.2 V	2.54 mm	85 Cel		DIFFERENTIAL	0 Cel	1		DUAL	R-PDIP-T24		5.08 mm	10.16 mm			COMPLEMENTARY	1		YES				30.5 mm	.15 V	1.8 ns
100314QIX	Onsemi	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	-5.7 V	5	ECL	1.8 ns		30 mA	DIFFERENTIAL				-5 V	CHIP CARRIER	LDCC28,.5SQ			.00024 Amp	-4.2 V	1.27 mm	85 Cel		DIFFERENTIAL	-40 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.48 mm			COMPLEMENTARY	1		YES				11.48 mm	.15 V	1.8 ns
NB100LVEP17DTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	ECL	.325 ns	GENERAL PURPOSE	55 mA	DIFFERENTIAL	2.5 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		2.375 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -2.375V TO -5.5V IN NECL MODE	YES	e4	30	260	6.5 mm		.325 ns
NB7NPQ1104MMTTWG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	42	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				334 mA	DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC42,.14X.35,20			.00005 Amp	3 V	.5 mm	85 Cel			-40 Cel		MATTE TIN	QUAD	R-PQCC-N42	1	.8 mm	3.5 mm			COMPLEMENTARY			YES	e3	30	260	9 mm
NB7NPQ1204EMMUTWG	Onsemi	LINE DRIVER																															NICKEL PALLADIUM GOLD			1									e4	30	260
NB3N4666CDTR2G	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	4	CMOS				DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.97 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm				4		NO	e4	30	260	5 mm		3.3 ns
74VHC161284MTDX	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	13	CMOS	30 ns	IEEE 1284		SCHMITT TRIGGER	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.5 mm	85 Cel			-40 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified			13		NO	e4	30	260	12.5 mm		30 ns
100314QI	Onsemi	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	-5.7 V	5	ECL	1.8 ns		30 mA	DIFFERENTIAL				-5 V	CHIP CARRIER	LDCC28,.5SQ			.00024 Amp	-4.2 V	1.27 mm	85 Cel		DIFFERENTIAL	-40 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.48 mm			COMPLEMENTARY	1		YES				11.48 mm	.15 V	1.8 ns
NB100LVEP17MNR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	VQCCN	RECTANGULAR	UNSPECIFIED	YES	5.5 V	4	ECL	.325 ns	GENERAL PURPOSE	55 mA	DIFFERENTIAL	2.5 V		-4.5	-4.5 V	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20		Line Driver or Receivers		2.375 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	R-XQCC-N24		1 mm	4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -2.375V TO -5.5V IN NECL MODE	YES	e0		235	4 mm		.325 ns
NBSG16VSBAR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1		.145 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40		Line Driver or Receivers	.00015 Amp	2.375 V	1 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn/Pb)	BOTTOM	S-PBGA-B16	3	1.4 mm	4 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES	e0	30	240	4 mm		.145 ns
NBSG16VSBAHTBG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1		.145 ns	GENERAL PURPOSE	34 mA	DIFFERENTIAL	2.5 V		+-2.5/+-3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40		Line Driver or Receivers	.0001 Amp	2.375 V	1 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B16		1.4 mm	4 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES				4 mm		.145 ns
NBSG16BA	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	BALL	16	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1	ECL	.145 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		GRID ARRAY, LOW PROFILE	BGA16,4X4,40		Line Driver or Receivers		2.375 V	1 mm	85 Cel			-40 Cel	1	TIN LEAD	BOTTOM	S-PBGA-B16	3	1.4 mm	4 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES	e0			4 mm		.145 ns
MC75174BDWR2	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	25 ns	V.11; X.27; EIA-422-A; EIA-485		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified					YES	e0	NOT SPECIFIED	235	12.8 mm	1.5 V	0 ns
NBSG16VSMAHTBG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	BALL	16	TBGA	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1		.145 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				GRID ARRAY, THIN PROFILE					2.375 V	1 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B16		1.03 mm	4 mm	Not Qualified			1		YES		NOT SPECIFIED	NOT SPECIFIED	4 mm		.145 ns
NB3N206SDG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1		2.4 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	2.97 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e3	NOT SPECIFIED	NOT SPECIFIED	4.9 mm	.05 V	6 ns
CS212EDWR16	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1			GENERAL PURPOSE		DIFFERENTIAL	15 V				SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified			1		YES	e0			10.3 mm		0 ns
MC3100EP16VSDT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.28 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0			3 mm		.28 ns
NB100LVEP17DT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	ECL	.325 ns	GENERAL PURPOSE	55 mA	DIFFERENTIAL	2.5 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		2.375 V	.65 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20		1.2 mm	4.4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -2.375V TO -5.5V IN NECL MODE	YES	e4		260	6.5 mm		.325 ns
CS212EDW16	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1			GENERAL PURPOSE		DIFFERENTIAL	15 V				SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified			1		YES	e0			10.3 mm		0 ns
NB100LVEP17MN	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	VQCCN	RECTANGULAR	UNSPECIFIED	YES	5.5 V	4	ECL	.325 ns	GENERAL PURPOSE	55 mA	DIFFERENTIAL	2.5 V		-4.5	-4.5 V	CHIP CARRIER, VERY THIN PROFILE	LCC24,.16SQ,20		Line Driver or Receivers		2.375 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	R-XQCC-N24		1 mm	4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -2.375V TO -5.5V IN NECL MODE	YES	e0		235	4 mm		.325 ns
NBSG16VSMAG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	BALL	16	TBGA	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1		.145 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V		+-2.5/+-3.3		GRID ARRAY, THIN PROFILE	LGA16,4X4,40		Line Driver or Receivers	.0001 Amp	2.375 V	1 mm	85 Cel			-40 Cel	1	Matte Tin (Sn)	BOTTOM	S-PBGA-B16		1.03 mm	4 mm	Not Qualified			1	NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V	YES	e3	40	260	4 mm		.145 ns
100314QC	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	-5.7 V	5	ECL	1.8 ns		30 mA	DIFFERENTIAL				-5 V	CHIP CARRIER	LDCC28,.5SQ			.00024 Amp	-4.2 V	1.27 mm	85 Cel		DIFFERENTIAL	0 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.48 mm			COMPLEMENTARY	1		YES				11.48 mm	.15 V	1.8 ns
FIN224CMLX	Onsemi	LINE TRANSCEIVER	OTHER	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	3.3 V	2			GENERAL PURPOSE		DIFFERENTIAL	2.775 V		1.8/3.3,3		CHIP CARRIER	LCC40,.24SQ,20		Line Driver or Receivers		2.5 V	.5 mm	70 Cel			-30 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N40	1	.8 mm	6 mm	Not Qualified			2		YES	e4	30	260	6 mm
NB7VPQ701MMUTBG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	12	VQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					DIFFERENTIAL	1.8 V				CHIP CARRIER, VERY THIN PROFILE					1.71 V	.4 mm	85 Cel			-40 Cel	1		QUAD	S-XQCC-N12	1	.55 mm	1.6 mm				1		YES				1.6 mm
74LVX161284MTDX	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13	CMOS	44 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	85 Cel	3.15 V		-40 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified			13	CONTAINS EIGHT BIDIRECTIONAL DATA BUFFERS	NO	e4	30	260	12.5 mm		44 ns
FIN424CMLX	Onsemi	LINE TRANSCEIVER	OTHER	NO LEAD	32	QCCN	SQUARE	UNSPECIFIED	YES										1.8,2.75		CHIP CARRIER	LCC32,.2SQ,20		Line Driver or Receivers			.5 mm	85 Cel			-30 Cel		NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N32	1			Not Qualified						e4	30	260

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.