Onsemi Line Drivers & Receivers 588

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MC10EL16DT	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1	ECL		GENERAL PURPOSE	22 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	3 mm		.325 ns
AM26LS30FN	Onsemi		INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES			TTL	200 ns						5/+-5		CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers	.00004 Amp		1.27 mm	85 Cel		3-STATE	-40 Cel	2	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J20				Not Qualified					YES	e0				2 V
MC100EL17DWR2	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	4	ECL		GENERAL PURPOSE		DIFFERENTIAL	5 V		-4.2/-5.5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified			4	ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e0		235	12.8 mm		.55 ns
FIN1531MTCX	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		2 ns	EIA-644; TIA-644		STANDARD	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.65 mm	85 Cel			-40 Cel	4		DUAL	R-PDSO-G16		1.1 mm	4.4 mm						YES				5 mm
MC10EP16DT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.28 ns	GENERAL PURPOSE	32 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.28 ns
MC10EP89DTG	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.37 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.1 mm	3 mm	Not Qualified				CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm	1.4 V	0 ns
MC100EP16TDR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.3 ns	GENERAL PURPOSE	39 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.3 ns
MC10SX1190DTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		.65 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified			1		YES	e4	30	260	6.5 mm		.38 ns
MC10EP16VADTR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.34 ns
MC100EL17DWR2G	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	4	ECL		GENERAL PURPOSE		DIFFERENTIAL	5 V		-4.2/-5.5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			-40 Cel		TIN	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified			4	ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3		260	12.8 mm		.55 ns
MC100EP16TMNR4G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	VSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.3 ns	GENERAL PURPOSE	39 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers	.00015 Amp	3 V	.5 mm	85 Cel			-40 Cel	1	NICKEL GOLD PALLADIUM	DUAL	R-PDSO-N8	1	1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES		30	260	2 mm		.3 ns
MC14C89ABP	Onsemi	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BIPOLAR		EIA-232-D; V.28; EIA-562	.7 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDIP-T14		4.69 mm	7.62 mm	Not Qualified	3.2 Amp		4	RESPONSE CONTROL		e0	30	235	18.86 mm		6000 ns
MC10EL16D	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	1	ECL		GENERAL PURPOSE	22 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	4.9 mm		.325 ns
MC100EP16TDTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.3 ns	GENERAL PURPOSE	39 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.3 ns
MC14C88BDR2	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	1	BIMOS	3500 ns	EIA-232-D; V.28; EIA-562		GATED	12 V		+-4.5/+-15	-12 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e0		235	8.65 mm	7.4 V	0 ns
MC100EP16FDTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.26 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.26 ns
MC100EP16MNR4	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.28 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		3.3/5		SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-N8		1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0			2 mm		.28 ns
NCV7382D	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		5000 ns	GENERAL PURPOSE		SCHMITT TRIGGER	5 V	18 V			SMALL OUTLINE		7 V			4.5 V	1.27 mm	125 Cel	12 V		-40 Cel	1	Tin/Lead (Sn80Pb20)	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1		NO	e0	NOT SPECIFIED	235	4.9 mm		6000 ns
NCV7383DB0R2G	Onsemi	LINE DRIVER																															NICKEL PALLADIUM GOLD			2									e4	30	260			0 ns
MC10H116ML2	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	ECL		GENERAL PURPOSE	23 mA	DIFFERENTIAL			-5.2	-5.2 V	SMALL OUTLINE	SOP16,.3		Line Driver or Receivers			1.27 mm	75 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16				Not Qualified			3			e4					1.45 ns
MC100EP16VCMNR4G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.4 ns	GENERAL PURPOSE	52 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers	.00015 Amp	3 V	.5 mm	85 Cel			-40 Cel	1	NICKEL GOLD PALLADIUM	DUAL	S-PDSO-N8	1	1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES		30	260	2 mm		.4 ns
MC100EP16VTDR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.35 ns	GENERAL PURPOSE	48 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.35 ns
MC10EL16DTG	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1	ECL		GENERAL PURPOSE	22 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN	DUAL	S-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e3	30	260	3 mm		.325 ns
MC10EP17MNG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	4	ECL	.3 ns	GENERAL PURPOSE	68 mA	DIFFERENTIAL	3.3 V		+-3.3/+-5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	TIN	QUAD	S-XQCC-N20	1	1 mm	4 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3		260	4 mm		.3 ns
MC100EP16VCDTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN	DUAL	S-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.4 ns
FIN1217MTDX	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3			EIA-644; TIA-644	66 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified					YES	e4	30	260	12.5 mm
MC100EP16MNR4G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.28 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		3.3/5		SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	1	NICKEL GOLD PALLADIUM	DUAL	S-PDSO-N8	1	1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES		30	260	2 mm		.28 ns
NCV7420D25R2G	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	26 V	1			GENERAL PURPOSE		STANDARD	7.3 V				SMALL OUTLINE					6 V	1.27 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	2	1.72 mm	3.93 mm	Not Qualified			1		NO	e3	30	260	8.68 mm
MC100EP16D	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.28 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn80Pb20)	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0	30	235	4.9 mm		.28 ns
MC10H116M	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3			GENERAL PURPOSE	23 mA	DIFFERENTIAL			-5.2	-5.2 V	SMALL OUTLINE	SOP16,.23		Line Driver or Receivers	.000095 Amp		1.27 mm	75 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2.05 mm	5.275 mm	Not Qualified		COMPLEMENTARY	3		YES	e4		260	10.2 mm		1.45 ns
MC100EP116FAG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	6	ECL	.34 ns	GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	FLATPACK, LOW PROFILE	QFP32,.35SQ,32		Line Driver or Receivers		3 V	.8 mm	85 Cel			-40 Cel	6	MATTE TIN	QUAD	S-PQFP-G32	2	1.6 mm	7 mm	Not Qualified			6	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	7 mm		.34 ns
MC10LVEP16D	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1	ECL	.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				SMALL OUTLINE					2.375 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.32 ns
MC100E116FN	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	40 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e0		235	11.505 mm		.45 ns
MC100EP16DR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.28 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	4.9 mm		.28 ns
MC10EL16MNR4G	Onsemi	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	UNSPECIFIED	YES	5.7 V	1	ECL		GENERAL PURPOSE	22 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers		4.2 V	.5 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	S-XDSO-N8		1 mm	2 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e3			2 mm		.325 ns
MC10EP16DTR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.28 ns	GENERAL PURPOSE	32 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.28 ns
NCV7420D25G	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	26 V	1			GENERAL PURPOSE		STANDARD	7.3 V				SMALL OUTLINE					6 V	1.27 mm	125 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G14	2	1.72 mm	3.93 mm	Not Qualified			1		NO	e3	30	260	8.68 mm
MC100LVEL16DR2	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1	ECL		GENERAL PURPOSE	24 mA	DIFFERENTIAL	3.3 V		-3.3	-3.3 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -3.8V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.375 ns
MC1489AML1	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		EIA-232-D	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SOP14,.3		Line Driver or Receivers		4.5 V	.65 mm	75 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL		e4			6.2 mm		50 ns
MC10LVEP16DR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1	ECL	.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				SMALL OUTLINE					2.375 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.32 ns
MC100EP16VADTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.34 ns
MC100EL16DR2	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	1	ECL		GENERAL PURPOSE	26 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0		235	4.9 mm		.325 ns
MC100EP16VADTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.34 ns
MC10EL16DR2G	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	1	ECL		GENERAL PURPOSE	22 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e3	30	260	4.9 mm		.325 ns
MC100EL16DTG	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1	ECL		GENERAL PURPOSE	26 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.2 V	.65 mm	85 Cel			-40 Cel		TIN	DUAL	S-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e3	30	260	3 mm		.325 ns
MC1488MR1	Onsemi	LINE DRIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	9.09 V	4	BIPOLAR	350 ns	EIA-232-D		GATED	9 V			-9 V	SMALL OUTLINE					8.91 V	1.27 mm	75 Cel			0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14		2.05 mm	5.275 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e4			10.2 mm
MC100E416FNG	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	186 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			0 Cel		TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3		260	11.505 mm		.5 ns
MC10EL89MNR4G	Onsemi	LINE DRIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	UNSPECIFIED	YES	5.7 V	1	ECL	.44 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, VERY THIN PROFILE					4.2 V	.5 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	S-XDSO-N8		1 mm	2 mm	Not Qualified				NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V	YES	e3			2 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.