Onsemi Line Drivers & Receivers 588

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MC100EP16DR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.28 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.28 ns
MC10E116FNR2	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e0		235	11.505 mm		.45 ns
MC10EP17DWG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	ECL	.3 ns	GENERAL PURPOSE	68 mA	DIFFERENTIAL	3.3 V		+-3.3/+-5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	4	TIN	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3		260	12.8 mm		.3 ns
MC100EP16VAD	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.34 ns
MC10EP16VCDR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL		GENERAL PURPOSE	32 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-3 TO -5.5	YES	e0			4.9 mm		0 ns
MC10EP17DWR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	ECL	.3 ns	GENERAL PURPOSE	68 mA	DIFFERENTIAL	3.3 V		+-3.3/+-5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified			4	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	12.8 mm		.3 ns
FIN1101M	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		1.75 ns	EIA-644-A; TIA-644-A		DIFFERENTIAL	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G8		1.753 mm	3.899 mm				1		YES				4.902 mm		1.75 ns
MC10H115MR1	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	ECL		GENERAL PURPOSE		DIFFERENTIAL				-5.2 V	SMALL OUTLINE						1.27 mm	75 Cel			0 Cel			DUAL	R-PDSO-G16		2.05 mm	5.275 mm	Not Qualified			4		NO				10.2 mm		1.3 ns
MC100LVEP16DTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.8 V	1	ECL	.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.375 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.32 ns
FIN1218MTDX	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3			EIA-644; TIA-644		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G48		1.2 mm	6.1 mm				3		NO				12.5 mm
MC3488ADR2	Onsemi	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	2	BIPOLAR	140000 ns	EIA-232-D; X.26; X.28; EIA-423; FED STD 1030		STANDARD	12 V		+-12	-12 V	SMALL OUTLINE	DIP8,.3		Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel			0 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified				PROGRAMMABLE SLEW RATE	NO	e0	30	235	4.9 mm	8 V	0 ns
MC100EP116FAR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	6	ECL	.34 ns	GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	FLATPACK, LOW PROFILE	QFP32,.35SQ,32		Line Driver or Receivers		3 V	.8 mm	85 Cel			-40 Cel	6	TIN LEAD	QUAD	S-PQFP-G32		1.6 mm	7 mm	Not Qualified			6	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	7 mm		.34 ns
MC10LVEP16DTR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.8 V	1		.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.375 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	3	1.1 mm	3 mm	Not Qualified				CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		0 ns
MC100EP16VAMNR4	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers	.00015 Amp	3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-N8		1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0			2 mm		.34 ns
MC10H116MR2	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3			GENERAL PURPOSE	23 mA	DIFFERENTIAL			-5.2	-5.2 V	SMALL OUTLINE	SOP16,.23		Line Driver or Receivers	.000095 Amp		1.27 mm	75 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		2.05 mm	5.275 mm	Not Qualified		COMPLEMENTARY	3		YES	e4			10.2 mm		1.45 ns
MC100LVEP16MNR4	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.8 V	1		.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					2.375 V	.5 mm	85 Cel			-40 Cel	1	TIN	DUAL	S-XDSO-N8	1	1 mm	2 mm	Not Qualified				CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e3			2 mm		0 ns
MC1488MEL	Onsemi	LINE DRIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	9.09 V	4	BIPOLAR	350 ns	EIA-232-D		GATED	9 V		+-9	-9 V	SMALL OUTLINE	SOP14,.3		Line Driver or Receivers	.00001 Amp	8.91 V	1.27 mm	75 Cel			0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	3	2.05 mm	5.275 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e4	NOT SPECIFIED	NOT SPECIFIED	10.2 mm	12 V	0 ns
MC10114P	Onsemi	LINE RECEIVER	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		3	ECL		GENERAL PURPOSE	39 mA	DIFFERENTIAL			-5.2	-5.2 V	IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	85 Cel			-30 Cel		TIN LEAD	DUAL	R-PDIP-T16		4.44 mm	7.62 mm	Not Qualified			3		YES	e0		235	19.175 mm		4 ns
MC10EP16DR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.28 ns	GENERAL PURPOSE	32 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.28 ns
MC10EP16VADT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.34 ns
MC1489DG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		EIA-232-D	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	75 Cel			0 Cel		Tin (Sn)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e3	40	260	8.65 mm		85 ns
MC10EP16VAMNR4	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers	.00015 Amp	3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-N8		1 mm	2 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0			2 mm		.34 ns
MC100LVEP16DTR2G	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.8 V	1		.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.375 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	3	1.1 mm	3 mm	Not Qualified				CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		0 ns
MC10E416FNG	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	162 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			0 Cel		TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3		260	11.505 mm		.5 ns
MC10H115FNR2	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		4	ECL		GENERAL PURPOSE	29 mA	DIFFERENTIAL			-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers			1.27 mm	75 Cel			0 Cel		TIN LEAD	QUAD	S-PQCC-J20	1	4.57 mm	8.965 mm	Not Qualified			4		NO	e0		235	8.965 mm		1.3 ns
MC100EP16VBDTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.4 ns	GENERAL PURPOSE	38 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.4 ns
MC10EP116FAR2G	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	LQFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	6	ECL	.34 ns	GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	FLATPACK, LOW PROFILE	QFP32,.35SQ,32		Line Driver or Receivers		3 V	.8 mm	85 Cel			-40 Cel	6	TIN	QUAD	S-PQFP-G32	2	1.6 mm	7 mm	Not Qualified			6	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3		260	7 mm		.34 ns
MC10EP16VBDT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL		GENERAL PURPOSE	32 mA	DIFFERENTIAL	3.3 V		-5.2	-5.2 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-3 TO -5.5	YES	e0			3 mm		0 ns
NCV7380DG	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		5000 ns	GENERAL PURPOSE		SCHMITT TRIGGER	5 V	18 V			SMALL OUTLINE		7 V			4.5 V	1.27 mm	125 Cel	12 V		-40 Cel	1	Tin (Sn)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1		NO	e3	40	260	4.9 mm		6000 ns
FIN1047M	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm	.25 V	0 ns
MC10LVEP16MNR4	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.8 V	1		.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					2.375 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-XDSO-N8		1 mm	2 mm	Not Qualified				CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e0			2 mm		0 ns
MC100EP16TDTG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.3 ns	GENERAL PURPOSE	39 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	3	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	3 mm		.3 ns
MC10LVEP16DTR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.8 V	1	ECL	.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.375 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.32 ns
MC100EP16VADT	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	ECL	.34 ns	GENERAL PURPOSE	40 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.1 mm	3 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e0		235	3 mm		.34 ns
NCV7383DB0G	Onsemi	LINE DRIVER																															Tin (Sn)			2									e3
MC10H116FNR2G	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		3	ECL		GENERAL PURPOSE	23 mA	DIFFERENTIAL			-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers			1.27 mm	75 Cel			0 Cel		MATTE TIN	QUAD	S-PQCC-J20	3	4.57 mm	8.965 mm	Not Qualified			3		YES	e3	30	260	8.965 mm		1.3 ns
MC1489ADR2G	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		EIA-232-D	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	75 Cel			0 Cel		Tin (Sn)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e3	40	260	8.65 mm		85 ns
MC100LVEP16DR2	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1	ECL	.32 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V				SMALL OUTLINE					2.375 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -2.375 V TO -3.8 V SUPPLY IN NECL MODE	YES	e0		235	4.9 mm		.32 ns
MC1489APG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BIPOLAR		EIA-232-D	26 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	75 Cel			0 Cel		Tin (Sn)	DUAL	R-PDIP-T14		4.69 mm	7.62 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e3	NOT SPECIFIED	260	18.86 mm		85 ns
MC100EP116MNG	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	21	VQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	6	ECL	.34 ns	GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V		-4.5	-4.5 V	CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	6	TIN	QUAD	S-XQCC-N21	1	1 mm	5 mm	Not Qualified			6	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE	YES	e3	30	260	5 mm		.34 ns
MC1489M	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		EIA-232-D	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.5 V	1.27 mm	75 Cel			0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	3	2.05 mm	5.275 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e4	NOT SPECIFIED	NOT SPECIFIED	10.2 mm		85 ns
NCV7321D10G	Onsemi	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	27 V	1			GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	12 V				SMALL OUTLINE					5 V	1.27 mm	125 Cel			-40 Cel	1	TIN	DUAL	R-PDSO-G8	2	1.75 mm	3.9 mm	Not Qualified			1		NO	e3	30	260	4.9 mm		6000 ns
MC10114L	Onsemi	LINE RECEIVER	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO		3	ECL		GENERAL PURPOSE	39 mA	DIFFERENTIAL			-5.2	-5.2 V	IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	85 Cel			-30 Cel		TIN LEAD	DUAL	R-CDIP-T16		5.08 mm	7.62 mm	Not Qualified			3		YES	e0			19.49 mm		4 ns
MC100EL17DWG	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.7 V	4	ECL		GENERAL PURPOSE	33 mA	DIFFERENTIAL	5 V		-4.2/-5.5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified			4	ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	12.8 mm		.55 ns
MC10E416FNR2	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	162 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e0		235	11.505 mm		.5 ns
MC100EL16MNR4	Onsemi	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE	UNSPECIFIED	YES	5.7 V	1	ECL		GENERAL PURPOSE	26 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.08,20		Line Driver or Receivers		4.2 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-XDSO-N8		1 mm	2 mm	Not Qualified			1	NECL MODE: VCC=0 VEE=-4.2 TO -5.7	YES	e0			2 mm		.325 ns
MC10115FN	Onsemi	LINE RECEIVER	OTHER	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		4	ECL		GENERAL PURPOSE	29 mA	DIFFERENTIAL			-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers			1.27 mm	85 Cel			-30 Cel		TIN LEAD	QUAD	S-PQCC-J20	1	4.57 mm	8.965 mm	Not Qualified			4		NO	e0		235	8.965 mm		2.9 ns
MC1489ADR2	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		EIA-232-D	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	75 Cel			0 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e0	NOT SPECIFIED	235	8.65 mm		85 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.