Toshiba Latches & Flip-Flops 995

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
TC7WZ74FU	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	CMOS	1		1.8	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.16	23 ns	24 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	180 MHz	R-PDSO-G8	5.5 V	1.3 mm	2.8 mm	Not Qualified	COMPLEMENTARY	1.65 V				30	260	2.9 mm	LVC/LCX/Z
TC74HC109AF-TP1EL	Toshiba	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		38 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G16	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V						10.3 mm	HC/UH
TC74LVQ273FS(ELP)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		3.3		50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		14.5 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	65 MHz	R-PDSO-G20	3.6 V	1.6 mm	4.4 mm	Not Qualified	TRUE	2 V			e0			6.5 mm	LVQ
TC74HC175AF	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS	4	TUBE	4.5	2/6	50 pF	SMALL OUTLINE	SOP16,.3	175 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	29 MHz	R-PDSO-G16	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V				NOT SPECIFIED	NOT SPECIFIED	10.3 mm	HC/UH
TC74VCX2374FT(EL)	Toshiba
TC74ACT374F(F)	Toshiba
TC74LCX574FS	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	150000000 Hz	CMOS			3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25		24 Amp	FF/Latches	.635 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20				Not Qualified					e0
TC74LVQ174F	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6		CMOS			3.3	3.3	50 pF	SMALL OUTLINE	SOP16,.3		12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G16				Not Qualified					e0
TC74ACT109P	Toshiba	J-KBAR FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	85000000 Hz	CMOS	2		5	5	50 pF	IN-LINE	DIP16,.3	11.4 ns	24 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	85 MHz	R-PDIP-T16	5.5 V	4.45 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V		50 OHM LINE DRIVE CAPABILITY FOR < = 10MS ONE O/P AT A TIME	e0			19.25 mm	ACT
TC74HC173F	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	4					SMALL OUTLINE		205 ns			1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	59 MHz	R-PDSO-G16	6 V	1.8 mm		Not Qualified	TRUE	2 V		WITH HOLD MODE	e0				HC/UH
TC74AC175FS	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	4					SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		16 ns			.65 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	170 MHz	R-PDSO-G16	5.5 V	1.6 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V			e0			5 mm	AC
TC7W74FU(TE12L)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS	1	TR	5	2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.16	38 ns	4 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G8	6 V	1.2 mm	2.8 mm	Not Qualified	COMPLEMENTARY	2 V				NOT SPECIFIED	NOT SPECIFIED	2.9 mm	HC/UH
TC74HCT74AF(EL,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	22000000 Hz	CMOS		TR	5	5	50 pF	SMALL OUTLINE	SOP14,.3		4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G14				Not Qualified
TC74ACT377F(TP2)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		5		50 pF	SMALL OUTLINE		13 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	75 MHz	R-PDSO-G20	5.5 V	1.8 mm	5.3 mm	Not Qualified	TRUE	4.5 V		WITH HOLD MODE; 50 OHM LINE DRIVE CAPABILITY FOR < = 10MS ONE O/P AT A TIME				12.8 mm	ACT
TC74VCXH16374FT(EL,F)	Toshiba
TC74LVQ374FS	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	65000000 Hz	CMOS			3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25		12 Amp	FF/Latches	.635 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20				Not Qualified					e0
TC74VCX16823FT(EL,F)	Toshiba
TC74VHC273FK	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	VSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	70000000 Hz	CMOS	8		3.3	2/5.5	50 pF	SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH	TSSOP20,.16,20	19.5 ns	8 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	100 MHz	R-PDSO-G20	5.5 V	1 mm	3 mm	Not Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	5 mm	AHC/VHC
TC74LVX373F(F)	Toshiba	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	TUBE	3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.3		4 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74VCX162823FT(EL,F)	Toshiba
TC74VCXH162374FT(EL)	Toshiba
TC74ACT273P	Toshiba	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	80000000 Hz	CMOS	8		5	5	50 pF	IN-LINE	DIP20,.3	12 ns	24 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	170 MHz	R-PDIP-T20	5.5 V	4.45 mm	7.62 mm	Not Qualified	TRUE	4.5 V				NOT SPECIFIED	NOT SPECIFIED	24.6 mm	ACT
TC74ACT175P(F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	4	80000000 Hz	CMOS		TUBE	5	5	50 pF	IN-LINE	DIP16,.3		24 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T16				Not Qualified
TC74ACT273F(F)	Toshiba	D FLIP-FLOP		GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		5		50 pF	SMALL OUTLINE	SOP20,.3	12 ns	75 Amp		1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G20	5.5 V	1.9 mm	5.3 mm		TRUE	4.5 V	200 mA					12.8 mm	ACT
TC74HC73AF-EL	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		31 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDSO-G14	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V				NOT SPECIFIED	240	10.3 mm	HC/UH
TC74VHC374F(EL,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	75000000 Hz	CMOS		TR		2/5.5	50 pF	SMALL OUTLINE	SOP20,.3		8 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74VHC9273P	Toshiba	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	70000000 Hz	CMOS	8		3	2/5.5	50 pF	IN-LINE	DIP20,.3	25.5 ns	8 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	50 MHz	R-PDIP-T20	5.5 V	4.15 mm	4.4 mm	Not Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	25.1 mm	AHC/VHC/H/U/V
TC74HC107AFN	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	25000000 Hz	CMOS	2			2/6	50 pF	SMALL OUTLINE	SOP14,.25	155 ns	5.2 Amp	FF/Latches	1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G14	6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		NOT AVAILABLE IN JAPAN		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	HC/UH
TC74AC174F	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	60000000 Hz	CMOS	6		3.3	3.3/5	50 pF	SMALL OUTLINE	SOP16,.3	16.6 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	90 MHz	R-PDSO-G16	5.5 V	1.9 mm	5.3 mm	Not Qualified	TRUE	2 V			e0			10.3 mm	AC
TC74LCX74FN(EL,F)	Toshiba	JBAR-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	150000000 Hz	CMOS			3.3	3.3	50 pF	SMALL OUTLINE	SOP14,.25		24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G14				Not Qualified
TC74ACT112FN-ELP	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		11.5 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL	85 MHz	R-PDSO-G16	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	4.5 V		50 OHM LINE DRIVE CAPABILITY FOR < = 10MS ONE O/P AT A TIME				9.9 mm	ACT
TC74HC273AF(EL,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	24000000 Hz	CMOS		TR		2/6	50 pF	SMALL OUTLINE	SOP20,.3		4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74LVQ74FN(ELP)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		3.3		50 pF	SMALL OUTLINE		16 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	65 MHz	R-PDSO-G14	3.6 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V				NOT SPECIFIED	240	8.65 mm	LVQ
TC74HC175AF-TP2EL	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	4		5		50 pF	SMALL OUTLINE		35 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	25 MHz	R-PDSO-G16	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e0			10.3 mm	HC/UH
TC74VHC273FN	Toshiba	D FLIP-FLOP		GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8					SMALL OUTLINE								POSITIVE EDGE		TIN LEAD	DUAL		R-PDSO-G20				Not Qualified	TRUE				e0				AHC/VHC
TC74HC259AF	Toshiba	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	1		4.5	2/6	50 pF	SMALL OUTLINE	SOP16,.3	165 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		LOW LEVEL	-40 Cel	TIN LEAD	DUAL		R-PDSO-G16	6 V	1.9 mm	5.3 mm	Not Qualified	TRUE	2 V		1-TO-8 LINE DEMULTIPLEXER	e0			10.3 mm	HC/UH
TC74VHC175FN	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS	4		3.3	2/5.5	50 pF	SMALL OUTLINE		17 ns	8 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	125 MHz	R-PDSO-G16	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		NOT AVAILABLE IN JAPAN		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AHC/VHC
TC74HC174AFN	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	26000000 Hz	CMOS	6		4.5	2/6	50 pF	SMALL OUTLINE	SOP16,.25	190 ns	4 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	30 MHz	R-PDSO-G16	6 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		NOT AVAILABLE IN JAPAN		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	HC/UH
TC74AC112F(TP1)	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		10.8 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN LEAD	DUAL	80 MHz	R-PDSO-G16	5.5 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e0			10.3 mm	AC
TC74HCT174AF-TP2EL	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	6		5		50 pF	SMALL OUTLINE		43 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN COPPER/TIN SILVER	DUAL	24 MHz	R-PDSO-G16	5.5 V	1.9 mm	5.3 mm	Not Qualified	TRUE	4.5 V			e2			10.3 mm	HCT
TC74LCX574F(F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	150000000 Hz	CMOS			3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.3		24 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74AC174FN-ELP	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	6		5		50 pF	SMALL OUTLINE		11 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	90 MHz	R-PDSO-G16	5.5 V	1.75 mm	3.9 mm	Not Qualified	TRUE	2 V		50 OHM LINE DRIVE CAPABILITY FOR < = 10MS ONE O/P AT A TIME				9.9 mm	AC
TC74HC74AF-EL	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		5		50 pF	SMALL OUTLINE		38 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	25 MHz	R-PDSO-G14	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e0			10.3 mm	HC/UH
TC74HC77AF-TP1EL	Toshiba	D LATCH	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		25 ns			1.27 mm	85 Cel		HIGH LEVEL	-40 Cel		DUAL		R-PDSO-G14	6 V	1.9 mm	5.3 mm	Not Qualified	TRUE	2 V						10.3 mm	HC/UH
TC74VCX16841FT(SPL	Toshiba	D LATCH	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	10		3.3	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		24 Amp	FF/Latches	.5 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G56				Not Qualified
TC74ACT174F	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	85000000 Hz	CMOS	6		5	5	50 pF	SMALL OUTLINE	SOP16,.3	11.5 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	85 MHz	R-PDSO-G16	5.5 V	1.9 mm	5.3 mm	Not Qualified	TRUE	4.5 V			e0			10.3 mm	ACT
TC74VCX162373FT(EL)	Toshiba	D LATCH	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	8	TR	3.3	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		12 Amp	FF/Latches	.5 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G48				Not Qualified
TC74AC573F(EL,F)	Toshiba	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	TR		3.3/5	50 pF	SMALL OUTLINE	SOP20,.3		12 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G20				Not Qualified

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.