Toshiba Latches & Flip-Flops 995

Reset All

Part	Manufacturer	Logic IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Maximum Frequency At Nominal Supply	Technology	No. of Bits	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Load Capacitance (CL)	Package Style (Meter)	Package Equivalence Code	Propagation Delay (tpd)	Maximum I (ol)	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Trigger Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	Minimum fmax	JESD-30 Code	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width	Qualification	Output Polarity	Minimum Supply Voltage (Vsup)	Maximum Power Supply Current (ICC)	Additional Features	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Family
TC74VCX2573FT(EL)	Toshiba
TC74ACT377F(TP1)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		5		50 pF	SMALL OUTLINE		13 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	75 MHz	R-PDSO-G20	5.5 V	1.8 mm	5.3 mm	Not Qualified	TRUE	4.5 V		WITH HOLD MODE; 50 OHM LINE DRIVE CAPABILITY FOR < = 10MS ONE O/P AT A TIME				12.8 mm	ACT
TC74VCX162721FT(EL)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	20	250000000 Hz	CMOS		TR	3.3	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		12 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G56				Not Qualified
TC74ACT273P(F)	Toshiba	D FLIP-FLOP		THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		CMOS	8		5		50 pF	IN-LINE	DIP20,.3	12 ns	75 Amp		2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDIP-T20	5.5 V	4.45 mm	7.62 mm		TRUE	4.5 V	200 mA					24.6 mm	ACT
TC74HC76AF-TP1EL	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		31 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL	25 MHz	R-PDSO-G16	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V						10.3 mm	HC/UH
TC74HCT574AP(F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	8	25000000 Hz	CMOS			5	5	50 pF	IN-LINE	DIP20,.3		6 Amp	FF/Latches	2.54 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T20				Not Qualified
TC74HC377AFN	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8					SMALL OUTLINE		175 ns				85 Cel		POSITIVE EDGE	-40 Cel		DUAL	77 MHz	R-PDSO-G20	6 V			Not Qualified	TRUE	2 V		WITH HOLD MODE		NOT SPECIFIED	240		HC/UH
TC74LVQ273FS	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	CERAMIC	YES	8	65000000 Hz	CMOS			3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25		12 Amp	FF/Latches	.635 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-XDSO-G20				Not Qualified					e0
TC74HC109AP(F)	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	25000000 Hz	CMOS		TUBE		2/6	50 pF	IN-LINE	DIP16,.3		4 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDIP-T16				Not Qualified
TC74LVQ373F	Toshiba	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.3			FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDSO-G20				Not Qualified					e0
TC74HC573AF(EL)	Toshiba
TC74HCT74AF-TP2EL	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		5		50 pF	SMALL OUTLINE		41 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN COPPER/TIN SILVER	DUAL	22 MHz	R-PDSO-G14	5.5 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V			e2			10.3 mm	HCT
TC74VHC175FS	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	75000000 Hz	CMOS	4		3.3	2/5.5	50 pF	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	SSOP16,.25	17 ns	8 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	125 MHz	R-PDSO-G16	5.5 V	1.6 mm	4.4 mm	Not Qualified	COMPLEMENTARY	2 V						5 mm	AHC/VHC
TC74AC373F(EL,F)	Toshiba
TC74VHC74F(EL,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS	1	TR	5	2/5.5	50 pF	SMALL OUTLINE	SOP14,.3	17.5 ns	8 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	110 MHz	R-PDSO-G14	5.5 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V						10.3 mm	AHC/VHC/H/U/V
TC74ACT175F	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	80000000 Hz	CMOS	4		5	5	50 pF	SMALL OUTLINE	SOP16,.3	12.5 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	80 MHz	R-PDSO-G16	5.5 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0			10.3 mm	ACT
TC74HC173AF-TP1	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	4		5		50 pF	SMALL OUTLINE		29 ns			1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	34 MHz	R-PDSO-G16	6 V	1.9 mm	5.3 mm	Not Qualified	TRUE	2 V		WITH HOLD MODE; WITH DUAL OUTPUT ENABLE	e0			10.3 mm	HC/UH
TC74HC74AF-TP2EL	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		5		50 pF	SMALL OUTLINE		38 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN COPPER/TIN SILVER	DUAL	25 MHz	R-PDSO-G14	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e2			10.3 mm	HC/UH
TC74AC273F(TP1)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		5		50 pF	SMALL OUTLINE		11 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	90 MHz	R-PDSO-G20	5.5 V	1.9 mm	5.3 mm	Not Qualified	TRUE	2 V			e0			12.8 mm	AC
TC74HC77AF-TP2EL	Toshiba	D LATCH	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		25 ns			1.27 mm	85 Cel		HIGH LEVEL	-40 Cel	TIN COPPER/TIN SILVER	DUAL		R-PDSO-G14	6 V	1.9 mm	5.3 mm	Not Qualified	TRUE	2 V			e2			10.3 mm	HC/UH
TC74AC573FT(EL)	Toshiba	D LATCH	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	TR		3.3/5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		12 Amp	FF/Latches	.635 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC7W74FK(TE85L,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	25000000 Hz	CMOS		TR		2/6	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.12,20		4 Amp	FF/Latches	.5 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G8				Not Qualified
TC74AC175FN	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	40000000 Hz	CMOS	4		3.3	3.3/5	50 pF	SMALL OUTLINE	SOP16,.25	16 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G16	5.5 V	1.75 mm	3.9 mm	Not Qualified	COMPLEMENTARY	2 V		NOT AVAILABLE IN JAPAN		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	AC
TC74VHC74FN(ELP,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	75000000 Hz	CMOS		TR		2/5.5	50 pF	SMALL OUTLINE	SOP14,.25		8 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G14				Not Qualified
TC74HC374AF(EL,F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	25000000 Hz	CMOS		TR		2/6	50 pF	SMALL OUTLINE	SOP20,.3		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74HCT74AP	Toshiba	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	2	22000000 Hz	CMOS	1		5	5	50 pF	IN-LINE	DIP14,.3	41 ns	4 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	24 MHz	R-PDIP-T14	5.5 V	4.45 mm	7.62 mm	Not Qualified	COMPLEMENTARY	4.5 V				NOT SPECIFIED	NOT SPECIFIED	19.25 mm	HCT
TC74LCX374F(F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	150000000 Hz	CMOS			3.3	3.3	50 pF	SMALL OUTLINE	SOP20,.3		24 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74VCX2373FT(EL)	Toshiba
TC74VHCV374FK(EL)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	75000000 Hz	CMOS		TR		2/5.5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.16,20		16 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74ACT273F(TP2)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		5		50 pF	SMALL OUTLINE		12 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	80 MHz	R-PDSO-G20	5.5 V	1.8 mm	5.3 mm	Not Qualified	TRUE	4.5 V		50 OHM LINE DRIVE CAPABILITY FOR < = 10MS ONE O/P AT A TIME				12.8 mm	ACT
TC74LVX374FS	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	55000000 Hz	CMOS			3.3	3.3	50 pF	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25		4 Amp	FF/Latches	.635 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74LVX273F(EL)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		3.3		50 pF	SMALL OUTLINE		16.5 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	55 MHz	R-PDSO-G20	3.6 V	1.8 mm	5.3 mm	Not Qualified	TRUE	2 V			e0			12.8 mm	LV/LV-A/LVX/H
TC74VCXH162374FT(S	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16	250000000 Hz	CMOS			3.3	3.3	30 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		12 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G48				Not Qualified
TC74HC75AF-TP1EL	Toshiba	D LATCH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		31 ns			1.27 mm	85 Cel		HIGH LEVEL	-40 Cel	TIN COPPER/TIN SILVER	DUAL		R-PDSO-G16	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e2			10.3 mm	HC/UH
TC74AC377P	Toshiba	D FLIP-FLOP	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	50000000 Hz	CMOS	8			3.3/5	50 pF	IN-LINE	DIP20,.3	20 ns	12 Amp	FF/Latches	2.54 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	140 MHz	R-PDIP-T20	5.5 V	4.45 mm	7.62 mm	Not Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	24.6 mm	AC
TC74HC113AF(EL)	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		31 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel		DUAL	32 MHz	R-PDSO-G14	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V				NOT SPECIFIED	NOT SPECIFIED	10.3 mm	HC/UH
TC74LCX273FT	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	150000000 Hz	CMOS	8		2.7	3.3	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	9.5 ns	24 Amp	FF/Latches	.65 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	150 MHz	R-PDSO-G20	3.6 V	1.2 mm	4.4 mm	Not Qualified	TRUE	2 V				NOT SPECIFIED	NOT SPECIFIED	6.5 mm	LVC/LCX/Z
TC74VHCT574AFK(EL)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	8	75000000 Hz	CMOS		TR	5	5	50 pF	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.16,20		8 Amp	FF/Latches	.5 mm	85 Cel	3-STATE	POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G20				Not Qualified
TC74HC109AF-TP2	Toshiba	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		38 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	25 MHz	R-PDSO-G16	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e0			10.3 mm	HC/UH
TC74ACT175F(F)	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	4	80000000 Hz	CMOS		TUBE	5	5	50 pF	SMALL OUTLINE	SOP16,.3		24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL		R-PDSO-G16				Not Qualified
TC74HC113F	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2					SMALL OUTLINE		170 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	68 MHz	R-PDSO-G14	6 V	1.8 mm		Not Qualified	COMPLEMENTARY	2 V			e0				HC/UH
TC74ACT109F	Toshiba	J-KBAR FLIP-FLOP	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2	85000000 Hz	CMOS	2		5	5	50 pF	SMALL OUTLINE	SOP16,.3	11.4 ns	24 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	85 MHz	R-PDSO-G16	5.5 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0			10.3 mm	ACT
TC74VCX573FK(EL)	Toshiba
TC74HCT273AFW-TP2ELP	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8		5		50 pF	SMALL OUTLINE		38 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN COPPER/TIN SILVER	DUAL	24 MHz	R-PDSO-G20	5.5 V	2.7 mm	7.5 mm	Not Qualified	TRUE	4.5 V			e2			12.8 mm	HCT
TC74AC377FW	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	50000000 Hz	CMOS	8			3.3/5	50 pF	SMALL OUTLINE	SOP20,.4	20 ns	12 Amp	FF/Latches	1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel		DUAL	140 MHz	R-PDSO-G20	5.5 V	2.7 mm	7.5 mm	Not Qualified	TRUE	2 V		NOT AVAILABLE IN JAPAN		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	AC
TC74HC73AF-TP2EL	Toshiba	J-K FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	2		5		50 pF	SMALL OUTLINE		31 ns			1.27 mm	85 Cel		NEGATIVE EDGE	-40 Cel	TIN COPPER/TIN SILVER	DUAL	24 MHz	R-PDSO-G14	6 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	2 V			e2			10.3 mm	HC/UH
TC74HCT74AF-EL	Toshiba	D FLIP-FLOP	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	2		CMOS	1		5		50 pF	SMALL OUTLINE		41 ns			1.27 mm	85 Cel		POSITIVE EDGE	-40 Cel	TIN LEAD	DUAL	22 MHz	R-PDSO-G14	5.5 V	1.9 mm	5.3 mm	Not Qualified	COMPLEMENTARY	4.5 V			e0			10.3 mm	HCT
TC74HC373AF(EL)	Toshiba	D LATCH	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		CMOS	8	TR		2/6	50 pF	SMALL OUTLINE	SOP20,.3		6 Amp	FF/Latches	1.27 mm	85 Cel	3-STATE		-40 Cel		DUAL		R-PDSO-G20				Not Qualified

Latches & Flip-Flops

Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.

A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.

Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.

Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.

Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.