CROSS POINT SWITCH Multiplexers & Switches 562

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Nominal Bandwidth	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ADV3201ASWZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	176	HLFQFP	SQUARE	YES	PLASTIC/EPOXY		1	32			GULL WING	-3.63 V	-3.3 V	3.3 V	3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP176,1.0SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G176	SEPARATE OUTPUT	3	3.63 V	1.6 mm	24 mm	Not Qualified	90 dB	2.97 V			-2.97 V	e3			260					24 mm
TS5USBC412YFFT	Texas Instruments	CROSS POINT SWITCH	COMMERCIAL	12	VFBGA	RECTANGULAR	YES	UNSPECIFIED	.022 mA	1	2		1200 kHz	BALL			3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	70 Cel	0 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B12		1	5.5 V	.625 mm	1.198 mm		25 dB	2.3 V				e1		30	260	250000 ns	9 ohm	1000 ns	.075 ohm	1.598 mm
TS5USBC410YFFT	Texas Instruments	CROSS POINT SWITCH	COMMERCIAL	12	VFBGA	RECTANGULAR	YES	UNSPECIFIED	.022 mA	1	2		1200 kHz	BALL			3.3 V		GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.4 mm	70 Cel	0 Cel	TIN SILVER COPPER	BOTTOM	R-XBGA-B12		1	5.5 V	.625 mm	1.198 mm		25 dB	2.3 V				e1		30	260	250000 ns	9 ohm	1000 ns	.075 ohm	1.598 mm
CD22M3494MQZ96	Renesas Electronics	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BIMOS		J BEND			5 V	4/15	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J44	SEPARATE OUTPUT	3	15 V	4.57 mm	16.585 mm	Not Qualified	95 dB	4 V	16 X 8 ARRAY			e3		30	245	100 ns	75 ohm	100 ns	6 ohm	16.585 mm
SY58040UMY	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	44	HVQCCN	SQUARE	YES	UNSPECIFIED	.3 mA	1	4			NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC44,.28SQ,20		.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N44	SEPARATE OUTPUT	2	2.625 V	.9 mm	7 mm	Not Qualified		2.375 V		.1 V		e3								7 mm	1.7 V
ADG2128BCPZ-REEL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	12	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	5.5 V	1 mm	5 mm	Not Qualified	66 dB	4.5 V	ALSO OPERATES AT 12V SINGLE SUPPLY		-4.5 V	e3	MAKE-BEFORE-BREAK		260	215 ns	85 ohm	255 ns	4.5 ohm	5 mm
AD8110ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	80	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16	BIPOLAR		GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G80	SEPARATE OUTPUT	3	5.5 V	1.6 mm	12 mm	Not Qualified	93 dB	4.5 V			-4.5 V	e3		30	260					12 mm
CD22M3494MQZ	Renesas Electronics	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BIMOS		J BEND			5 V	4/15	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J44	SEPARATE OUTPUT	3	15 V	4.57 mm	16.585 mm	Not Qualified	95 dB	4 V	16 X 8 ARRAY			e3		30	245	100 ns	75 ohm	100 ns	6 ohm	16.585 mm
AD8158ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N100		3	3.3 V	.9 mm	12 mm	Not Qualified		1.6 V				e3		30	260					12 mm
MAX4989ETD+	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	14	HVSON	SQUARE	YES	UNSPECIFIED		1	2	BICMOS		NO LEAD			3.3 V	3/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC14,.12,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	S-XDSO-N14		1	5.5 V	.8 mm	3 mm	Not Qualified	15 dB	2.7 V				e3	BREAK-BEFORE-MAKE	30	260	100000 ns	9 ohm	6000 ns	.5 ohm	3 mm
SY58023UMG	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED	130 mA	1	2			NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N16	SEPARATE OUTPUT	2	3.6 V	.9 mm	3 mm	Not Qualified		2.375 V	3.3V NOMINAL ALSO AVAILABLE			e4		40	260					3 mm
AD8108ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	80	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	8	BIPOLAR		GULL WING	-5.5 V	-5 V	5 V	5	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G80	SEPARATE OUTPUT	3	5.5 V	1.6 mm	12 mm	Not Qualified	93 dB	4.5 V			-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	180 ns				12 mm
CD22101F	Intersil	CROSS POINT SWITCH	MILITARY	24	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		1	1	CMOS		THROUGH-HOLE			5 V	5/15	IN-LINE	DIP24,.6	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T24	SEPARATE OUTPUT			5.72 mm	15.24 mm	Not Qualified	96 dB					e0				960 ns	600 ohm	850 ns	25 ohm
SY58024UMG	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED	250 mA	2	2			NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.20SQ,20		.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N32	SEPARATE OUTPUT	2	2.625 V	.9 mm	5 mm	Not Qualified		2.375 V				e4		40	260					5 mm
ADG2188BCPZ-REEL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	8	CMOS		NO LEAD			12 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	13.2 V	1 mm	5 mm	Not Qualified	69 dB	10.8 V	CAN ALSO OPERATES AT +/-12 V SUPPLY			e3	MAKE-BEFORE-BREAK		260	185 ns	50 ohm	250 ns	4.5 ohm	5 mm
SY55858UHG	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	32	HTQFP	SQUARE	YES	PLASTIC/EPOXY	190 mA	2	2			GULL WING			3.3 V		FLATPACK, HEAT SINK/SLUG, THIN PROFILE	TQFP32,.35SQ,31		.8 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G32	SEPARATE OUTPUT	3	3.6 V	1.2 mm	7 mm	Not Qualified		2.3 V				e4								7 mm
AD8159ASVZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	HTFQFP	SQUARE	YES	PLASTIC/EPOXY		1	12			GULL WING			3.3 V		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G100		3	3.6 V	1.2 mm	14 mm	Not Qualified		3 V				e3			260					14 mm
NB6L72MMNR2G	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16		1	3.63 V	1 mm	3 mm	Not Qualified		2.375 V	ALSO OPERATES WITH 0V -3.63V SUPPLY					30	260	.48 ns		.48 ns		3 mm
NB6L72MNG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16		1	3.63 V	1 mm	3 mm	Not Qualified		2.375 V	NECL MODE: 0V GND WITH VEE = -2.375V TO -3.63V; IT ALSO WORKS ON 3.3 V SUPPLY					30	260	.16 ns		.16 ns		3 mm
AD75019JPZ-REEL	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS		J BEND		-12 V	12 V	5,+-12	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J44		3		4.57 mm	16.5862 mm	Not Qualified	92 dB					e3		30	260		300 ohm		20 ohm	16.5862 mm
ADG2128BCPZ-HS-RL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	12	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	5.5 V	1 mm	5 mm	Not Qualified	66 dB	4.5 V	ALSO OPERATES AT 12V SINGLE SUPPLY		-4.5 V	e3	MAKE-BEFORE-BREAK		260	200 ns	75 ohm	250 ns	4.5 ohm	5 mm
MC3416P	Motorola	CROSS POINT SWITCH	COMMERCIAL	24	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		2		BIPOLAR		THROUGH-HOLE					IN-LINE	DIP24,.6	Multiplexer or Switches	2.54 mm	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T24						Not Qualified						e0
DG884DN-E3	Vishay Intertechnology	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	NMOS		J BEND	-5.5 V	-3 V	15 V	5,15,-3	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J44		1	20 V	4.57 mm	16.5862 mm	Not Qualified		10 V	8 X 4 ARRAY		0 V	e3	BREAK-BEFORE-MAKE			300 ns	90 ohm	175 ns	3 ohm	16.5862 mm
DG884DN	Vishay Intertechnology	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	NMOS		J BEND	-5.5 V	-3 V	15 V	5,15,-3	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J44			20 V	4.57 mm	16.5862 mm	Not Qualified		10 V	8 X 4 ARRAY		0 V	e0	BREAK-BEFORE-MAKE			300 ns	90 ohm	175 ns	3 ohm	16.5862 mm
M21048G-12	M/a-com Technology Solutions	CROSS POINT SWITCH								1	48																	COMMON OUTPUT
DS25CP102TSQ/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	90 mA	1				NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1		.75 mm	4 mm	Not Qualified						e3	BREAK-BEFORE-MAKE	30	260	20000 ns				4 mm
DS25CP102TSQX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	QCCN	SQUARE	YES	PLASTIC/EPOXY		1				NO LEAD			3.3 V	3.3	CHIP CARRIER	LCC16,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1				Not Qualified						e3	BREAK-BEFORE-MAKE	30	260	20000 ns
DS25CP104ATSQ/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	40	HVQCCN	SQUARE	YES	UNSPECIFIED	190 mA	1	1			NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N40	SEPARATE OUTPUT	3	3.6 V	.8 mm	6 mm	Not Qualified		3 V				e3	MAKE-BEFORE-BREAK	30	260	20000 ns				6 mm
DS90CP04TLQ/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	300 mA	1	4	CMOS		NO LEAD			2.5 V	2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N32	SEPARATE OUTPUT	3	2.625 V	.8 mm	6 mm	Not Qualified		2.375 V	4 X 4 ARRAY			e3	BREAK-BEFORE-MAKE	30	260	.16 ns		.16 ns		6 mm
MT8808APR1	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS		J BEND			5 V	5/12,GND/-7	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28	SEPARATE OUTPUT		13.2 V	4.57 mm	11.505 mm	Not Qualified	95 dB	4.5 V				e3				100 ns	185 ohm		5 ohm	11.505 mm
MT8816AP1	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS		J BEND		-7 V	5 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J44			13.2 V	4.57 mm	16.585 mm	Not Qualified	95 dB	4.5 V	8 X 16 ARRAY			e3					185 ohm		5 ohm	16.585 mm
NB6L72MMNG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16		1	3.63 V	1 mm	3 mm	Not Qualified		2.375 V	ALSO OPERATES WITH 0V -3.63V SUPPLY					30	260	.48 ns		.48 ns		3 mm
NB7L72MMNG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16		1	2.625 V	1 mm	3 mm	Not Qualified		2.375 V	ALSO OPERATES IN SUPPLY VOLTAGE 3 TO 3.6V WITH 3.3V NOMINAL					30	260					3 mm
NB7L72MMNHTBG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	2.625 V	1 mm	3 mm	Not Qualified		2.375 V	ALSO OPERATES IN SUPPLY VOLTAGE 3 TO 3.6V WITH 3.3V NOMINAL					30	260					3 mm
NB7L72MMNTXG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16	SEPARATE OUTPUT	1	2.625 V	1 mm	3 mm	Not Qualified		2.375 V	ALSO OPERATES IN SUPPLY VOLTAGE 3 TO 3.6V WITH 3.3V NOMINAL					30	260					3 mm
NBSG72AMN	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			2.5 V	+-2.5/+-3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16			3.465 V	1 mm	3 mm	Not Qualified		2.375 V	NECL MODE: 0V VCC WITH VEE = -2.375V TO -3.465V			e0			235					3 mm
NBSG72AMNG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			2.5 V	+-2.5/+-3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16		1	3.465 V	1 mm	3 mm	Not Qualified		2.375 V	NECL MODE: 0V VCC WITH VEE = -2.375V TO -3.465V					30	260					3 mm
NBSG72AMNR2	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			2.5 V	+-2.5/+-3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N16			3.465 V	1 mm	3 mm	Not Qualified		2.375 V	NECL MODE: 0V VCC WITH VEE = -2.375V TO -3.465V			e0			235					3 mm
NBSG72AMNR2G	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2			NO LEAD			2.5 V	+-2.5/+-3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16		1	3.465 V	1 mm	3 mm	Not Qualified		2.375 V	NECL MODE: 0V VCC WITH VEE = -2.375V TO -3.465V					30	260					3 mm
AD75019JPZ	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS		J BEND		-12 V	12 V	5,+-12	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J44		3		4.57 mm	16.5862 mm	Not Qualified	92 dB					e3		30	260		300 ohm		20 ohm	16.5862 mm
AD8105ABPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	304	BGA	SQUARE	YES	PLASTIC/EPOXY		1	32			BALL		-2.5 V	2.5 V	+-2.5/5	GRID ARRAY	BGA304,23X23,50	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B304	SEPARATE OUTPUT	3		1.765 mm	31 mm	Not Qualified	90 dB					e1			260					31 mm
DS25CP104ATSQX/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	40	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	190 mA	1				NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N40	SEPARATE OUTPUT	3		.8 mm	6 mm	Not Qualified						e3	MAKE-BEFORE-BREAK	30	260	20000 ns				6 mm
MAX9675ECQ+	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	100	QFP	SQUARE	YES	PLASTIC/EPOXY		1		BICMOS		GULL WING				3/5/+-5	FLATPACK	TQFP100,.63SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G100	SEPARATE OUTPUT	3				Not Qualified						e3
MAX9675ECQ+T	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	100	QFP	SQUARE	YES	PLASTIC/EPOXY		1		BICMOS		GULL WING				3/5/+-5	FLATPACK	TQFP100,.63SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		QUAD	S-PQFP-G100	SEPARATE OUTPUT					Not Qualified
MT8816AE1	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	40	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	16	CMOS		THROUGH-HOLE		-7 V	5 V	5/12,GND/-7	IN-LINE	DIP40,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDIP-T40	SEPARATE OUTPUT		13.2 V	6.35 mm	15.24 mm	Not Qualified	95 dB	4.5 V	8 X 16 ARRAY			e3				100 ns	185 ohm		5 ohm	51.75 mm
MT8816AP	Microsemi	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS		J BEND		-7 V	5 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J44			13.2 V	4.57 mm	16.585 mm	Not Qualified	95 dB	4.5 V	8 X 16 ARRAY			e0					185 ohm		5 ohm	16.585 mm
MT8816APR1	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	CMOS		J BEND		-7 V	5 V		CHIP CARRIER			1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J44			13.2 V	4.57 mm	16.585 mm	Not Qualified	95 dB	4.5 V	8 X 16 ARRAY			e3					185 ohm		5 ohm	16.585 mm
ADG2188YCPZ-REEL7	Analog Devices	CROSS POINT SWITCH	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	8	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	5.5 V	1 mm	5 mm	Not Qualified	64 dB	4.5 V	CAN ALSO OPERATES AT +/-12 V SUPPLY		-4.5 V	e3	MAKE-BEFORE-BREAK		260	200 ns	75 ohm	250 ns	4.5 ohm	5 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.