CROSS POINT SWITCH Multiplexers & Switches 562

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Screening Level	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
ADV3202ASWZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	176	HLFQFP	SQUARE	YES	PLASTIC/EPOXY		1	32			GULL WING	-2.75 V	-2.5 V	2.5 V	2.5	FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP176,1.0SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G176	SEPARATE OUTPUT	3	2.75 V	1.6 mm	24 mm	Not Qualified	80 dB	2.25 V			-2.25 V	e3			260					24 mm
CD22100D	Intersil	CROSS POINT SWITCH	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC		1		CMOS		THROUGH-HOLE				5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T16	SEPARATE OUTPUT					Not Qualified						e0				700 ns	1625 ohm
CD22100E	Intersil	CROSS POINT SWITCH	INDUSTRIAL	16	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	4	CMOS		THROUGH-HOLE			5 V	5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T16	SEPARATE OUTPUT		18 V	5.33 mm	7.62 mm	Not Qualified	80 dB	3 V				e0				220 ns	600 ohm	420 ns	25 ohm	19.17 mm
CD22100F	Intersil	CROSS POINT SWITCH	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC, GLASS-SEALED		1	4	CMOS		THROUGH-HOLE			5 V	5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	TIN LEAD	DUAL	R-GDIP-T16	SEPARATE OUTPUT		18 V	5.33 mm	7.62 mm	Not Qualified	80 dB	3 V				e0				220 ns	600 ohm	420 ns	25 ohm	9.585 mm
CD22100F/3A	Rca Solid State	CROSS POINT SWITCH	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC		1		CMOS	38535Q/M;38534H;883B	THROUGH-HOLE				5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T16	SEPARATE OUTPUT					Not Qualified						e0				700 ns	1625 ohm
CD22100FX	Intersil	CROSS POINT SWITCH	MILITARY	16	DIP	RECTANGULAR	NO	CERAMIC		1		CMOS		THROUGH-HOLE				5/15	IN-LINE	DIP16,.3	Multiplexer or Switches	2.54 mm	125 Cel	-55 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T16	SEPARATE OUTPUT											e0				700 ns	1625 ohm
M21151G-24	M/a-com Technology Solutions	CROSS POINT SWITCH	OTHER	1156	BGA	SQUARE	YES	PLASTIC/EPOXY		1	144	CMOS		BALL			1.2 V	1.2	GRID ARRAY	BGA1156,34X34,40	Multiplexer or Switches	1 mm	85 Cel	0 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B1156		5	1.26 V	3.16 mm	35 mm	Not Qualified		1.14 V				e1								35 mm
MT8808AP1	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	28	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS		J BEND			5 V	5/12,GND/-7	CHIP CARRIER	LDCC28,.5SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-J28	SEPARATE OUTPUT		13.2 V	4.57 mm	11.505 mm	Not Qualified	95 dB	4.5 V				e3				100 ns	185 ohm		5 ohm	11.505 mm
CD22M3494MQA	Intersil	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BIMOS		J BEND			5 V	4/15	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQCC-J44	SEPARATE OUTPUT	1	15 V	4.57 mm	16.585 mm	Not Qualified	95 dB	4 V	16 X 8 ARRAY			e0				100 ns	75 ohm	100 ns	6 ohm	16.585 mm
CD22M3494MQAZ96	Renesas Electronics	CROSS POINT SWITCH	INDUSTRIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	16	BIMOS		J BEND			5 V	4/15	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J44	SEPARATE OUTPUT	3	15 V	4.57 mm	16.585 mm	Not Qualified	95 dB	4 V	16 X 8 ARRAY			e3		30	245	100 ns	75 ohm	100 ns	6 ohm	16.585 mm
FSA2866UMX	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	20	QCCN	SQUARE	YES	PLASTIC/EPOXY		2				NO LEAD				1.65/4.3	CHIP CARRIER	LCC20,.11SQ,16	Multiplexer or Switches	.4 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20		1				Not Qualified						e4		30	260
MAX4355ECQ-TD	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	100	TFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS		GULL WING	-5.25 V	-3 V	3 V		FLATPACK, THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G100		3	5.25 V	1.2 mm	14 mm	Not Qualified	112 dB	2.25 V			-2.25 V	e0								14 mm
MAX4355ECQ+TD	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	100	TFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16	BICMOS		GULL WING	-5.25 V	-3 V	3 V		FLATPACK, THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN	QUAD	S-PQFP-G100		3	5.25 V	1.2 mm	14 mm	Not Qualified	112 dB	2.25 V			-2.25 V	e3								14 mm
MT8816AE	Microsemi	CROSS POINT SWITCH	INDUSTRIAL	40	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	16	CMOS		THROUGH-HOLE		-7 V	5 V		IN-LINE			2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T40			13.2 V	6.35 mm	15.24 mm	Not Qualified	95 dB	4.5 V	8 X 16 ARRAY			e0					185 ohm		5 ohm	51.75 mm
SY58023UMG-TR	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED	130 mA	1	2			NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20		.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N16	SEPARATE OUTPUT	2	3.6 V	.9 mm	3 mm	Not Qualified		2.375 V	3.3V NOMINAL ALSO AVAILABLE			e4		40	260					3 mm
SY58040UMY-TR	Microchip Technology	CROSS POINT SWITCH	INDUSTRIAL	44	HVQCCN	SQUARE	YES	UNSPECIFIED	.3 mA	1	4			NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC44,.28SQ,20		.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N44	SEPARATE OUTPUT		2.625 V	.9 mm	7 mm	Not Qualified		2.375 V		.1 V		e3								7 mm	1.7 V
TUSB1146RNQT	Texas Instruments	CROSS POINT SWITCH	COMMERCIAL	40	HVQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	5			NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.17X.25,16		.4 mm	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	COMMON OUTPUT	1	3.6 V	.8 mm	4 mm			3 V				e4		30	260	500 ns	10 ohm	500 ns	2.5 ohm	6 mm
TUSB546-DCIRNQR	Texas Instruments	CROSS POINT SWITCH	COMMERCIAL	40	VQCCN	RECTANGULAR	YES	PLASTIC/EPOXY		1	1			NO LEAD					CHIP CARRIER, VERY THIN PROFILE			.4 mm	70 Cel	0 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	R-PQCC-N40	SEPARATE OUTPUT	1		.8 mm	4 mm							e4		30	260					6 mm
ADG2128BCPZ-REEL	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	12	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	5.5 V	1 mm	5 mm	Not Qualified	66 dB	4.5 V	ALSO OPERATES AT 12V SINGLE SUPPLY		-4.5 V	e3	MAKE-BEFORE-BREAK		260	215 ns	85 ohm	255 ns	4.5 ohm	5 mm
MAX3841ETG	Maxim Integrated	CROSS POINT SWITCH	INDUSTRIAL	24	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2	BICMOS		NO LEAD			3.3 V	1.8/3.3,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-XQCC-N24	SEPARATE OUTPUT	1	3.6 V	.8 mm	4 mm	Not Qualified		3 V				e0				.03 ns		.03 ns		4 mm
MAX3841ETG+	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2	BICMOS		NO LEAD			3.3 V	1.8/3.3,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N24	SEPARATE OUTPUT	1	3.6 V	.8 mm	4 mm	Not Qualified		3 V				e3		30	260	.03 ns		.03 ns		4 mm
ADN4605ABPZ	Analog Devices	CROSS POINT SWITCH		352		SQUARE	YES	PLASTIC/EPOXY						BALL					GRID ARRAY						MATTE TIN	BOTTOM	S-PBGA-B352		3				Not Qualified						e3		30	260
MAX4456CQH+D	Maxim Integrated	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS		J BEND	-5.5 V	-5 V	5 V	+-5	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	MATTE TIN	QUAD	S-PQCC-J44	SEPARATE OUTPUT	3	5.5 V	4.57 mm	16.5862 mm	Not Qualified	80 dB	4.5 V	VIDEO APPLICATION		-4.5 V	e3				50 ns		35 ns		16.5862 mm
MAX4456CQH-D	Maxim Integrated	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1	8	CMOS		J BEND	-5.5 V	-5 V	5 V	+-5	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J44	SEPARATE OUTPUT	1	5.5 V	4.57 mm	16.5862 mm	Not Qualified	80 dB	4.5 V	VIDEO APPLICATION		-4.5 V	e0				50 ns		35 ns		16.5862 mm
AD8111ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	80	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16	BIPOLAR		GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G80	SEPARATE OUTPUT	3	5.5 V	1.6 mm	12 mm	Not Qualified	99 dB	4.5 V			-4.5 V	e3		30	260					12 mm
ADN4612ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	88	HVQCCN	SQUARE	YES	UNSPECIFIED		1	12			NO LEAD			2.5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N88		3	2.75 V	.85 mm	12 mm			2.25 V	ALSO REQUIRED ANALOG REFERENCE VOLTAGE 1.6 TO 2V			e3		30	260					12 mm
ADG2128YCPZ-REEL7	Analog Devices	CROSS POINT SWITCH	AUTOMOTIVE	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	12	CMOS		NO LEAD	-5.5 V	-5 V	5 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	125 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	5.5 V	1 mm	5 mm	Not Qualified	64 dB	4.5 V	ALSO OPERATES AT 12V SINGLE SUPPLY		-4.5 V	e3	MAKE-BEFORE-BREAK	30	260	220 ns	95 ohm	260 ns	4.5 ohm	5 mm
AD8114ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16			GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G100	SEPARATE OUTPUT	3	5.5 V	1.6 mm	14 mm	Not Qualified	90 dB	4.5 V			-4.5 V	e3		30	260					14 mm
CD22M3494E	Intersil	CROSS POINT SWITCH	INDUSTRIAL	40	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	16	BIMOS		THROUGH-HOLE			5 V	5/12,GND/-7	IN-LINE	DIP40,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T40	SEPARATE OUTPUT		15 V	6.35 mm	15.24 mm	Not Qualified	95 dB	4 V	16 X 8 ARRAY			e0				100 ns	75 ohm	100 ns	6 ohm	51.75 mm
CD74HC22106E	Intersil	CROSS POINT SWITCH	INDUSTRIAL	28	DIP	RECTANGULAR	NO	PLASTIC/EPOXY		1	8	CMOS		THROUGH-HOLE			4.5 V	5	IN-LINE	DIP28,.6	Multiplexer or Switches	2.54 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDIP-T28	SEPARATE OUTPUT		10 V	6.35 mm	15.24 mm	Not Qualified		2 V				e0				240 ns	700 ohm		25 ohm	37.4 mm
ADN4604ASVZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	HTFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16			GULL WING			3.3 V		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G100		3	3.6 V	1.2 mm	14 mm	Not Qualified		2.7 V				e3		30	260					14 mm
ADN4604ASVZ-RL	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	HTFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16			GULL WING			3.3 V		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G100		3	3.6 V	1.2 mm	14 mm	Not Qualified		2.7 V				e3		30	260					14 mm
DS25CP152QSQ/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	77 mA	1			AEC-Q100	NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQCC-N16	SEPARATE OUTPUT	1	3.6 V	.8 mm	4 mm	Not Qualified		3 V				e3	BREAK-BEFORE-MAKE	30	260	20000 ns				4 mm
DS90CP22MX-8	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2		CMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1		1.75 mm	3.9 mm	Not Qualified						e0		20	235					9.9 mm
SN65LVCP23PWR	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.087 mA	1	2	BICMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V				e4		30	260	2.5 ns		2.5 ns		5 mm
SN65LVCP23DR	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	BICMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V				e4		30	260	2.5 ns		2.5 ns		9.9 mm
LMH6584VV	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	144	QFP	SQUARE	YES	PLASTIC/EPOXY		1				GULL WING				+-3.3/+-5	FLATPACK	QFP144,.87SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G144	SEPARATE OUTPUT	2A				Not Qualified						e0		30	220
SN65LVCP22DG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.087 mA	1	2	BICMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V	CONFIGURABLE AS 2:1 MUX, 1:2 DEMUX, REPEATER OR 1:2 SIGNAL SPLITTER			e4		30	260	4 ns		4 ns		9.9 mm
DS10CP154ATSQ	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	40	HVQCCN	SQUARE	YES	UNSPECIFIED		1	4	CMOS		NO LEAD			3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel	-40 Cel		QUAD	S-XQCC-N40			3.6 V	.8 mm	6 mm	Not Qualified		3 V								20000 ns		25000 ns		6 mm
SN65LVCP202RGE	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	24	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	2			GULL WING			3.3 V		SMALL OUTLINE			.5 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G24			3.465 V	1 mm	4 mm	Not Qualified		3.135 V												4 mm
DS90CP22M-8/NOPB	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	125 mA	1	2	CMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.753 mm	3.9 mm	Not Qualified		3 V				e3	MAKE-BEFORE-BREAK	30	260	55 ns		4.5 ns		9.902 mm
DS90CP22M-8	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	125 mA	1	2	CMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.753 mm	3.9 mm	Not Qualified		3 V				e0	MAKE-BEFORE-BREAK	20	235	55 ns		4.5 ns		9.902 mm
SN65LVCP22DRG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	2	BICMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V	CONFIGURABLE AS 2:1 MUX, 1:2 DEMUX, REPEATER OR 1:2 SIGNAL SPLITTER			e4		30	260	4 ns		4 ns		9.9 mm
SN65LVCP402RGETG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	24	HVQCCN	SQUARE	YES	PLASTIC/EPOXY		1	2			NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	SEPARATE OUTPUT	3	3.465 V	1 mm	4 mm	Not Qualified		3.135 V				e4		30	260	.7 ns		.7 ns		4 mm
SN65LVCP23PWRG4	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	.087 mA	1	2	BICMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.2 mm	4.4 mm	Not Qualified		3 V				e4		NOT SPECIFIED	260	2.5 ns		2.5 ns		5 mm
SN65LVCP22D	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	.087 mA	1	2	BICMOS		GULL WING			3.3 V	3.3	SMALL OUTLINE	SOP16,.25	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	SEPARATE OUTPUT	1	3.6 V	1.75 mm	3.9 mm	Not Qualified		3 V	CONFIGURABLE AS 2:1 MUX, 1:2 DEMUX, REPEATER OR 1:2 SIGNAL SPLITTER			e4		30	260	4 ns		4 ns		9.9 mm
LMH6586VS	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	80	TFQFP	SQUARE	YES	PLASTIC/EPOXY		1	32	CMOS		GULL WING			5 V		FLATPACK, THIN PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G80		2	5.5 V	1.2 mm	12 mm		70 dB	4.5 V	VIDEO APPLICATION			e0		30	235					12 mm
SN65LVCP202RGET	Texas Instruments	CROSS POINT SWITCH	INDUSTRIAL	24	HVQCCN	SQUARE	YES	PLASTIC/EPOXY	.115 mA	1	2			GULL WING			3.3 V	3.3	SMALL OUTLINE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	SEPARATE OUTPUT	3	3.465 V	1 mm	4 mm	Not Qualified		3.135 V				e4		30	260					4 mm

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.