CROSS POINT SWITCH Multiplexers & Switches 562

Reset All

Part	Manufacturer	Other IC type	Temperature Grade	No. of Terminals	Package Code	Package Shape	Surface Mount	Package Body Material	Maximum Supply Current (Isup)	No. of Functions	No. of Channels	Technology	Terminal Form	Maximum Negative Supply Voltage (Vsup)	Nominal Negative Supply Voltage (Vsup)	Nominal Supply Voltage (Vsup)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Supply Voltage (Vsup)	Maximum Seated Height	Width (mm)	Qualification	Normal Position (V)	Nominal Off-state Isolation	Minimum Supply Voltage (Vsup)	Additional Features	Minimum Input Voltage	Minimum Negative Supply Voltage (Vsup)	JESD-609 Code	Switching (V)	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Maximum Switch-on Time	Maximum On-state Resistance (Ron)	Maximum Switch-off Time	Nominal On-state Resistance Match	Length	Maximum Input Voltage
AD8114AST	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	100	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16		GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD	S-PQFP-G100	SEPARATE OUTPUT	3	5.5 V	1.6 mm	14 mm	Not Qualified		90 dB	4.5 V			-4.5 V	e0			240					14 mm
AD8106ASTZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	80	LFQFP	SQUARE	YES	PLASTIC/EPOXY		1	16		GULL WING	-5.5 V	-5 V	5 V	+-5	FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-PQFP-G80	SEPARATE OUTPUT	3	5.5 V	1.6 mm	12 mm	Not Qualified	NO/NC	93 dB	4.5 V			-4.5 V	e3	MAKE-BEFORE-BREAK	30	260	60 ns				12 mm
ADG2188BCPZ-HS-RL7	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		1	8	CMOS	NO LEAD			12 V	+-5/12	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	3	13.2 V	1 mm	5 mm	Not Qualified		69 dB	10.8 V	CAN ALSO OPERATES AT +/-12 V SUPPLY			e3	MAKE-BEFORE-BREAK		260	185 ns	50 ohm	250 ns	4.5 ohm	5 mm
ADV3229ACPZ	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	72	HVQCCN	SQUARE	YES	UNSPECIFIED		1	8		NO LEAD	-5.5 V	-5 V	5 V	+-5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC72,.39SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N72	SEPARATE OUTPUT	3	5.5 V	1 mm	10 mm	Not Qualified		87 dB	4.5 V			-4.5 V	e3			260					10 mm
AD8152JBPZ	Analog Devices	CROSS POINT SWITCH	OTHER	256	LBGA	SQUARE	YES	PLASTIC/EPOXY		1	34		BALL			2.5 V		GRID ARRAY, LOW PROFILE			1.27 mm	85 Cel	0 Cel	TIN SILVER COPPER	BOTTOM	S-PBGA-B256		3	3.63 V	1.7 mm	27 mm	Not Qualified			2.25 V				e1		30	260		57 ohm			27 mm
MAX9392EHJ+T	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	TFQFP	SQUARE	YES	PLASTIC/EPOXY		2	2	BIPOLAR	GULL WING			3.3 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G32	SEPARATE OUTPUT	1	3.6 V	1.2 mm	5 mm	Not Qualified			3 V				e3		30	260	.574 ns		.555 ns		5 mm
MAX456CQH-T	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	44	QCCJ	SQUARE	YES	PLASTIC/EPOXY		1		CMOS	J BEND		-5 V	5 V	+-5	CHIP CARRIER	LDCC44,.7SQ	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	TIN LEAD	QUAD	S-PQCC-J44	SEPARATE OUTPUT					Not Qualified							e0					600 ohm
MAX4549EAX+T	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	36	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	3		GULL WING			3 V		SMALL OUTLINE, SHRINK PITCH			.8 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G36		1	3.3 V	2.64 mm	7.495 mm	Not Qualified		85 dB	2.7 V				e3		30	260	800 ns	60 ohm	350 ns	5 ohm	15.415 mm
MAX4359EWG+T	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4		GULL WING	-5.5 V	-5 V	5 V	+-5	SMALL OUTLINE	SOP24,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G24	SEPARATE OUTPUT		5.5 V	2.65 mm	7.5 mm	Not Qualified		80 dB	4.5 V	VIDEO APPLICATION		-4.5 V	e3	BREAK-BEFORE-MAKE			50 ns		35 ns		15.4 mm
MAX4548EAX+	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	36	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	3		GULL WING			3 V		SMALL OUTLINE, SHRINK PITCH			.8 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G36		1	3.3 V	2.64 mm	7.495 mm	Not Qualified		85 dB	2.7 V	CAN ALSO OPERATE WITH 5V SUPPLY			e3		30	260	1000 ns	60 ohm	500 ns	5 ohm	15.415 mm
MAX456ML	Analog Devices	CROSS POINT SWITCH		40	DFP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8		FLAT					FLATPACK						TIN LEAD	DUAL	R-PDFP-F40						Not Qualified		60 dB					e0
MAX4570EWI+	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4		GULL WING	-5.5 V	-5 V	5 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28		1	5.5 V	2.65 mm	7.5 mm	Not Qualified		55 dB	2.7 V			-2.7 V	e3		30	260	900 ns	80 ohm	500 ns	5 ohm	17.9 mm
MAX4359EAX+T	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	36	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4		GULL WING	-5.5 V	-5 V	5 V	+-5	SMALL OUTLINE, SHRINK PITCH	SOP36,.4,32	Multiplexer or Switches	.8 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G36	SEPARATE OUTPUT	1	5.5 V	2.64 mm	7.495 mm	Not Qualified		80 dB	4.5 V	VIDEO APPLICATION		-4.5 V	e3	BREAK-BEFORE-MAKE			50 ns		35 ns		15.415 mm
MAX9393EHJ+T	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	TFQFP	SQUARE	YES	PLASTIC/EPOXY		2	2	BIPOLAR	GULL WING			3.3 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G32	SEPARATE OUTPUT	1	3.6 V	1.2 mm	5 mm	Not Qualified			3 V				e3				.574 ns		.555 ns		5 mm
MAX456CMH	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	44	QFP		YES	PLASTIC/EPOXY		1		CMOS	GULL WING		-5 V	5 V	+-5	FLATPACK	QFP44(UNSPEC)	Multiplexer or Switches		70 Cel	0 Cel	TIN LEAD	QUAD		SEPARATE OUTPUT					Not Qualified							e0					600 ohm
MAX4548EAX+T	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	36	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	3		GULL WING			3 V		SMALL OUTLINE, SHRINK PITCH			.8 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G36		1	3.3 V	2.64 mm	7.495 mm	Not Qualified		85 dB	2.7 V				e3		30	260	800 ns	60 ohm	350 ns	5 ohm	15.415 mm
MAX4549EAX+	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	36	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	3		GULL WING			3 V		SMALL OUTLINE, SHRINK PITCH			.8 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G36		1	3.3 V	2.64 mm	7.495 mm	Not Qualified		85 dB	2.7 V	CAN ALSO OPERATE WITH 5V SUPPLY			e3		30	260	1000 ns	60 ohm	500 ns	5 ohm	15.415 mm
MAX4360EAX+T	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	36	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8		GULL WING	-5.5 V	-5 V	5 V	+-5	SMALL OUTLINE, SHRINK PITCH	SOP36,.4,32	Multiplexer or Switches	.8 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G36	SEPARATE OUTPUT	1	5.5 V	2.64 mm	7.495 mm	Not Qualified		80 dB	4.5 V	VIDEO APPLICATION		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	50 ns		35 ns		15.415 mm
MAX9390EHJ+T	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	TFQFP	SQUARE	YES	PLASTIC/EPOXY		2	2	BIPOLAR	GULL WING			3.3 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G32	SEPARATE OUTPUT	1	3.6 V	1.2 mm	5 mm	Not Qualified			3 V				e3		30	260	.565 ns		.53 ns		5 mm
MAX4570EAI+	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS	GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	SEPARATE OUTPUT	1	5.5 V	1.99 mm	5.29 mm	Not Qualified		63 dB	2.7 V	VIDEO APPLICATION		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	900 ns	80 ohm	500 ns	5 ohm	10.2 mm
MAX4570EAI+T	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS	GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Multiplexer or Switches	.65 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	SEPARATE OUTPUT	1	5.5 V	1.99 mm	5.29 mm	Not Qualified		63 dB	2.7 V	VIDEO APPLICATION		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	900 ns	80 ohm	500 ns	5 ohm	10.2 mm
MAX3841ETG+T	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2	BICMOS	NO LEAD			3.3 V	1.8/3.3,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N24	SEPARATE OUTPUT	1	3.6 V	.8 mm	4 mm	Not Qualified			3 V				e3		30	260					4 mm
MAX4548EAX+W	Analog Devices	CROSS POINT SWITCH
MAX4570EWI+T	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4		GULL WING	-5.5 V	-5 V	5 V		SMALL OUTLINE			1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28		1	5.5 V	2.65 mm	7.5 mm	Not Qualified		55 dB	2.7 V			-2.7 V	e3				900 ns	80 ohm	500 ns	5 ohm	17.9 mm
MAX9392EHJ+	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	TFQFP	SQUARE	YES	PLASTIC/EPOXY		2	2	BIPOLAR	GULL WING			3.3 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G32	SEPARATE OUTPUT	1	3.6 V	1.2 mm	5 mm	Not Qualified			3 V				e3		30	260	.574 ns		.555 ns		5 mm
MAX4359EAX+	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	36	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4		GULL WING	-5.5 V	-5 V	5 V	+-5	SMALL OUTLINE, SHRINK PITCH	SOP36,.4,32	Multiplexer or Switches	.8 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G36	SEPARATE OUTPUT	1	5.5 V	2.64 mm	7.495 mm	Not Qualified		80 dB	4.5 V	VIDEO APPLICATION		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	50 ns		35 ns		15.415 mm
MAX4359EWG+	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	24	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	4		GULL WING	-5.5 V	-5 V	5 V	+-5	SMALL OUTLINE	SOP24,.4	Multiplexer or Switches	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G24	SEPARATE OUTPUT	1	5.5 V	2.65 mm	7.5 mm	Not Qualified		80 dB	4.5 V	VIDEO APPLICATION		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	50 ns		35 ns		15.4 mm
MAX4550EEI-T	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4		GULL WING	-5.5 V				SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28			5.5 V	1.73 mm	3.9 mm	Not Qualified		55 dB	2.7 V			-2.7 V	e0								9.89 mm
MAX4550CAI+	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	28	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS	GULL WING	-5.25 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Multiplexer or Switches	.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	SEPARATE OUTPUT	1	5.25 V	1.99 mm	5.29 mm	Not Qualified		63 dB	2.7 V			0 V	e3	BREAK-BEFORE-MAKE	30	260	900 ns	80 ohm	500 ns	5 ohm	10.2 mm
MAX9390EHJ+	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	32	TFQFP	SQUARE	YES	PLASTIC/EPOXY		2	2	BIPOLAR	GULL WING			3.3 V	3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G32	SEPARATE OUTPUT	1	3.6 V	1.2 mm	5 mm	Not Qualified			3 V				e3		30	260	.565 ns		.53 ns		5 mm
MAX4570EEI-T	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	28	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4		GULL WING	-5.5 V	-5 V	5 V		SMALL OUTLINE, SHRINK PITCH			.635 mm	85 Cel	-40 Cel	TIN LEAD	DUAL	R-PDSO-G28			5.5 V	1.73 mm	3.9 mm	Not Qualified		55 dB	2.7 V	VIDEO APPLICATION, ALSO OPERATES WITH 2.7 TO 5.5 SINGLE SUPPLY		-2.7 V	e0				900 ns	80 ohm	500 ns	5 ohm	9.89 mm
MAX4570CWI+T	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	28	SOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4	CMOS	GULL WING	-5.5 V	-5 V	5 V	3/5/+-5	SMALL OUTLINE	SOP28,.4	Multiplexer or Switches	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	SEPARATE OUTPUT	1	5.25 V	2.65 mm	7.5 mm	Not Qualified		63 dB	2.7 V	VIDEO APPLICATION, ALSO OPERATES WITH 2.7 TO 5.5 SINGLE SUPPLY		-2.7 V	e3	BREAK-BEFORE-MAKE	30	260	900 ns	80 ohm	500 ns	5 ohm	17.9 mm
MAX4570CAI+	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	28	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4		GULL WING	-5.5 V	-5 V	5 V		SMALL OUTLINE, SHRINK PITCH			.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28		1	5.25 V	1.99 mm	5.29 mm	Not Qualified		63 dB	2.7 V	VIDEO APPLICATION, ALSO OPERATES WITH 2.7 TO 5.5 SINGLE SUPPLY		-2.7 V	e3		30	260	900 ns	80 ohm	500 ns	5 ohm	10.2 mm
MAX4570CAI+T	Analog Devices	CROSS POINT SWITCH	COMMERCIAL	28	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		2	4		GULL WING	-5.5 V	-5 V	5 V		SMALL OUTLINE, SHRINK PITCH			.65 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28		1	5.25 V	1.99 mm	5.29 mm	Not Qualified		63 dB	2.7 V	VIDEO APPLICATION, ALSO OPERATES WITH 2.7 TO 5.5 SINGLE SUPPLY		-2.7 V	e3		30	260	900 ns	80 ohm	500 ns	5 ohm	10.2 mm
MAX4360EAX+	Analog Devices	CROSS POINT SWITCH	INDUSTRIAL	36	SSOP	RECTANGULAR	YES	PLASTIC/EPOXY		1	8		GULL WING	-5.5 V	-5 V	5 V	+-5	SMALL OUTLINE, SHRINK PITCH	SOP36,.4,32	Multiplexer or Switches	.8 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G36	SEPARATE OUTPUT	1	5.5 V	2.64 mm	7.495 mm	Not Qualified		80 dB	4.5 V	VIDEO APPLICATION		-4.5 V	e3	BREAK-BEFORE-MAKE	30	260	50 ns		35 ns		15.415 mm
FIN1022M	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	35 mA	1	2		GULL WING			3.3 V		SMALL OUTLINE	SOP16,.25		1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G16			3.6 V	1.753 mm	3.899 mm				3 V		0 V						3.5 ns	75 ohm	3.5 ns		9.902 mm	3.6 V
NB4N840MMNG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		2	2	CMOS	NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	1	3.6 V	1 mm	5 mm	Not Qualified			3 V				e3		30	260	.135 ns	57.5 ohm	.135 ns		5 mm
NB4L858MFAR2G	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	32	LQFP	SQUARE	YES	PLASTIC/EPOXY		1	2		GULL WING			3.3 V		FLATPACK, LOW PROFILE			.8 mm	85 Cel	-40 Cel	TIN	QUAD	S-PQFP-G32		2	3.6 V	1.6 mm	7 mm	Not Qualified			2.3 V	IT CAN ALSO OPERATE WITH 2.5V SUPPLY			e3		30	260					7 mm
NB4N840MMNTWG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		2	2		NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	1	3.6 V	1 mm	5 mm	Not Qualified			3 V				e3		30	260	.135 ns		.135 ns		5 mm
FIN1022MTCX	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	35 mA	1	2		GULL WING			3.3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		.65 mm	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1	3.6 V	1.1 mm	4.4 mm	Not Qualified			3 V		0 V		e4		30	260	3.5 ns	75 ohm	3.5 ns		5 mm	3.6 V
NB7V72MMNHTXG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	QCCN	SQUARE	YES	PLASTIC/EPOXY		1			NO LEAD				1.8/2.5	CHIP CARRIER	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		QUAD	S-PQCC-N16	SEPARATE OUTPUT					Not Qualified
NB7L72MMNR2G	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	QCCN	SQUARE	YES	UNSPECIFIED		1			NO LEAD				2.5/3.3	CHIP CARRIER	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel		QUAD	S-XQCC-N16						Not Qualified
FIN1022MX	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	SOP	RECTANGULAR	YES	PLASTIC/EPOXY	35 mA	1	2		GULL WING			3.3 V		SMALL OUTLINE	SOP16,.25		1.27 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G16			3.6 V	1.753 mm	3.899 mm				3 V		0 V						3.5 ns	75 ohm	3.5 ns		9.902 mm	3.6 V
NB4N840MMNR4G	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	32	HVQCCN	SQUARE	YES	UNSPECIFIED		2	2	CMOS	NO LEAD			3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD	S-XQCC-N32	SEPARATE OUTPUT	1	3.6 V	1 mm	5 mm	Not Qualified			3 V				e3		30	260	.135 ns	57.5 ohm	.135 ns		5 mm
NB4L858MFAG	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	32	LQFP	SQUARE	YES	PLASTIC/EPOXY		1	2		GULL WING			3.3 V		FLATPACK, LOW PROFILE			.8 mm	85 Cel	-40 Cel	TIN	QUAD	S-PQFP-G32		2	3.6 V	1.6 mm	7 mm	Not Qualified			2.3 V	IT CAN ALSO OPERATE WITH 2.5V SUPPLY			e3		30	260					7 mm
NB6L72MNR2G	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	HVQCCN	SQUARE	YES	UNSPECIFIED		1	2		NO LEAD			2.5 V	2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Multiplexer or Switches	.5 mm	85 Cel	-40 Cel	NICKEL GOLD PALLADIUM	QUAD	S-XQCC-N16		1	3.63 V	1 mm	3 mm	Not Qualified			2.375 V	NECL MODE: 0V GND WITH VEE = -2.375V TO -3.63V; IT ALSO WORKS ON 3.3 V SUPPLY					30	260	.16 ns		.16 ns		3 mm
FIN1022MTC	Onsemi	CROSS POINT SWITCH	INDUSTRIAL	16	TSSOP	RECTANGULAR	YES	PLASTIC/EPOXY	35 mA	1	2		GULL WING			3.3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		.65 mm	85 Cel	-40 Cel		DUAL	R-PDSO-G16			3.6 V	1.1 mm	4.4 mm				3 V		0 V						3.5 ns	75 ohm	3.5 ns		5 mm	3.6 V
RHFLVDS228AK1	STMicroelectronics	CROSS POINT SWITCH

Multiplexers & Switches

Multiplexers and switches are electronic components used in digital and analog circuits to route signals between different inputs and outputs. They allow a single input signal to be sent to multiple output channels or vice versa.

A multiplexer, also known as a "mux," is a digital component that selects one of several input signals and forwards it to a single output. Multiplexers are often used in data communication systems to transmit multiple signals over a single communication channel. They can also be used in digital circuits to route control signals and address lines.

A switch is an electronic component that connects or disconnects two or more circuits. Switches can be mechanical or electronic and are used to control the flow of current in a circuit. In digital circuits, switches are used to connect or disconnect components and can be used to create logic gates and other digital components.

Multiplexers and switches are important components in various electronic systems, including communication systems, data processing systems, and control systems. They can be used to route signals between different parts of a circuit and to switch between different modes of operation. Multiplexers and switches can also be used to improve the efficiency of a system by reducing the number of components needed to perform a particular function.